« Return to Thread: Howto apply realtime patch to kernel

tweener board to robostix issues

by Shane Kirkbride :: Rate this Message:

Hi,
Now I am trying to use the Flash-LED program and get UART out on the
tweener board. I made the correct modifications to the tweener board
and plugged it in. It's not outputting anything. I changed the uart
from u0 to u1 in the code and back there was no change. Does anyone
have any ideas of how I can get the tweener board to work with
Flash-LED.c?
Thanks.
~Shane
On Tue, 20 May 2008 12:08:44 -0600
"Shane Kirkbride" <skirkbri@...> wrote:

> I was using a poorly made usb-rs232 converter. When I use the actual
> rs232 converter the program works fine.
> On Tue, 20 May 2008 12:00:14 -0600
> "Shane Kirkbride" <skirkbri@...> wrote:
>> Hi,
>> I'm using the robostix Flash-LED program. It says the baud rate
>>should
>> be 38400 8n1 but that output is giving me garbage. Any ideas on what
>> I'm doing wrong?
>> ~Shane
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> _______________________________________________
>> gumstix-users mailing list
>> gumstix-users@...
>> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> gumstix-users mailing list
> gumstix-users@...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
gumstix-users mailing list
gumstix-users@...
https://lists.sourceforge.net/lists/listinfo/gumstix-users

« Return to Thread: Howto apply realtime patch to kernel