nokia n95 timeouts

[xyon]

Hi everyone,

When trying to sync my n95 with the CLI msynctool, I get timeout errors.

Once msynctool is started, the phone immediately reports "Connecting".
After some time (long pause noted below in msynctool output), the phone
reports "Sending Calendar 5 of 5", and msynctool reports a disconnect
(shown below).

I've attached the hex hcidump and included below all pertinent
information I could think of.



Packages/versions:

bluez-hcidump 1.41-1
bluez-libs 3.27-1
bluez-utils 3.27-2
evolution 2.12.3-2
evolution-data-server 1.12.3-1
gnome-bluetooth 0.11.0-1.1
kdebluetooth 1.0_beta8-2
libopensync 0.36-1
libopensync-plugin-evolution2 0.36-4
libopensync-plugin-syncml 0.36-3
libopensync-plugin-vformat 0.36-1



hcidump command:

# hcidump -i hci0 -x -w hci.dump
HCI sniffer - Bluetooth packet analyzer ver 1.41
device: hci0 snap_len: 1028 filter: 0x0



msynctool command/output:

$ msynctool --sync evo_n95
Synchronizing group "evo_n95"
The previous synchronization was unclean. Slow-syncing
event sink of member 1 of type evo2-sync just connected
event sink of member 2 of type syncml-obex-client just connected
contact sink of member 2 of type syncml-obex-client just connected
contact sink of member 1 of type evo2-sync just connected
Main sink of member 1 of type evo2-sync just connected
Main sink of member 2 of type syncml-obex-client just connected
All clients connected or error
event sink of member 1 of type evo2-sync just sent all changes
Main sink of member 2 of type syncml-obex-client just sent all changes
Received an entry pas-id-4810983F00000003 from member 1 (evo2-sync).
Changetype ADDED
Received an entry pas-id-480E984A00000017 from member 1 (evo2-sync).
Changetype ADDED
Received an entry pas-id-4810983B00000002 from member 1 (evo2-sync).
Changetype ADDED
Received an entry pas-id-4810979C00000000 from member 1 (evo2-sync).
Changetype ADDED
contact sink of member 1 of type evo2-sync just sent all changes
Main sink of member 1 of type evo2-sync just sent all changes

**** There is a long pause here ****

event sink of member 2 of type syncml-obex-client had an error: Timeout.
contact sink of member 2 of type syncml-obex-client had an error:
Timeout.
The sync failed: At least one object engine failed while getting
changes. Aborting
event sink of member 2 of type syncml-obex-client just disconnected
contact sink of member 2 of type syncml-obex-client just disconnected
event sink of member 1 of type evo2-sync just disconnected
contact sink of member 1 of type evo2-sync just disconnected
Main sink of member 1 of type evo2-sync just disconnected




Configurations:

Member1 (evo2-sync):

<?xml version="1.0"?>
<config>
  <address_path>default</address_path>
  <calendar_path>default</calendar_path>
</config>


Member2 (Nokia n95 (Europe, non-8GB)):

<?xml version="1.0"?>
<config>
  <!-- sets the connection type to use. -->
  <!-- please note that actually OBEX over network is not supported -->
  <!-- 1 means obex over serial cable -->
  <!-- 2 means obex over bluetooth    -->
  <!-- 3 means obex over IRDA         -->
  <!-- 4 means obex over network      -->
  <!-- 5 means obex over usb          -->
  <type>2</type>

  <!-- (Only for bluetooth) The bluetooth address if the bluetooth mode
is selected.
       `hciconfig scan` to search bluetooth devices.  -->
  <bluetooth_address>00:xx:xx:xx:xx:xx</bluetooth_address>

  <!-- (Only for bluetooth) The bluetooth channel to use.
       `sdptool browse $MAC` to search for the correct channel -->
  <bluetooth_channel>10</bluetooth_channel>

  <!-- (Only for USB) The usb interface number of the SYNCML-SYNC
target. use syncml-obex-client -u (you will need access to the USB raw
device) to find it. -->
  <interface>0</interface>

  <!-- The string that the plugin will use to identify itself. Some
devices need a special string here. -->
  <identifier>PC Suite</identifier>

  <!-- The syncml version to use: 0 for 1.0, 1 for 1.1 and 2 for 1.2 -->
  <version>1</version>

  <!-- if the plugin should use wbxml -->
  <wbxml>1</wbxml>

  <!-- The username to use. Leave empty to not require a username -->
  <username></username>

  <!-- the password for the username -->
  <password></password>

  <!-- If wbxml is enabled, defines wether the wbxml should use string
tables -->
  <usestringtable>1</usestringtable>

  <!-- Never send ADD command, but send REPLACE (not needed normally)
-->
  <onlyreplace>0</onlyreplace>

  <!-- Workaround around for mobile phones which only use local
timestamps and _no_ UTC timestamps! -->
  <onlyLocaltime>0</onlyLocaltime>

  <!-- Sets the maximum allowed size in bytes of incoming messages (some
device need this option set). Example: 10000 -->
  <recvLimit>0</recvLimit>

  <maxObjSize>0</maxObjSize>

  <!-- XXX: Currently you need to write this by your own.
       Later it's planned to create such entries on the fly during
       the discovery() call. Example database field:

  <database>
     <name>Contacts</name>
     <objtype>contact</objtype>
     <objformat>vcard21</objformat>
  </database>
  -->
  <database>
        <name>Contacts</name>
        <objtype>contact</objtype>
        <objformat>vcard21</objformat>
  </database>
  <database>
        <name>Calendar</name>
        <objtype>event</objtype>
        <objformat>vevent20</objformat>
  </database>


</config>



-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users