|

»

»

Soekris - Technical

monowall bootup

View: New views

3 Messages — Rating Filter: Alert me

	monowall bootup by joe_lab :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message I have a 5501-60 I loaded monowall generic PC v1.233 generic version on a 256 CF Bios version is 1.33 on the Soekris When the unit is powered on it fails to locate the CF and it fails. If I then issue a reboot m0n0wall boots. How can I get this to boot m0n0wall at power up without needing a console cable. _______________________________________________ Soekris-tech mailing list Soekris-tech@... http://lists.soekris.com/mailman/listinfo/soekris-tech
	Re: monowall bootup by Joel Jaeggli-3 :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message what's the manufacturer of the cf? I run monowall on some 70s so I'd speculate it's not an across the board issue. joe_lab@... wrote: > I have a 5501-60 > I loaded monowall generic PC v1.233 generic version on a 256 CF > Bios version is 1.33 on the Soekris > When the unit is powered on it fails to locate the CF and it fails. > If I then issue a reboot m0n0wall boots. > > How can I get this to boot m0n0wall at power up without needing a console cable. > > > > _______________________________________________ > Soekris-tech mailing list > Soekris-tech@... > http://lists.soekris.com/mailman/listinfo/soekris-tech > _______________________________________________ Soekris-tech mailing list Soekris-tech@... http://lists.soekris.com/mailman/listinfo/soekris-tech
	Re: monowall bootup by K Kadow :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On Mon, Jun 16, 2008 at 5:32 PM, <joe_lab@...> wrote: > I have a 5501-60 > Bios version is 1.33 on the Soekris > When the unit is powered on it fails to locate the CF and it fails. > If I then issue a reboot ... boots. > > How can I get this to boot ... at power up without needing a console cable. The problem is an interaction between the Net5501 and some CF cards, is OS-agnostic. See the official answer at http://soekris.com/Issue0006.htm What I found was that if I upgrade the BIOS to 1.33b the card is detected but boot fails, the only solution was to walk over to Circuit City and buy an authentic Sandisk card. Kevin _______________________________________________ Soekris-tech mailing list Soekris-tech@... http://lists.soekris.com/mailman/listinfo/soekris-tech