Nabble - gambas-devel

Re: Proposed patches [SVN:1636 gambas/branches/2.0]

2008-10-07T16:46:30Z

Benoit,

According to my bash man page ${LN_S} is a "Parameter Expansion" of the LN_S variable. $(LN_S) is a "Command Substitution" of the LN_S command, like `LN_S`. This should be compatible with other shells. I do not know what BSDs and Solarises use. Revision 1578 of gambas/branches/2.0/acinclude.m4 seems to have fixed all LN_S issues for me.

Boian Berberov

On Tue, Oct 7, 2008 at 16:36, Benoit Minisini <gambas@...> wrote:

On mercredi 08 octobre 2008, Boian Berberov wrote:
> Gambas Developers,
>
> Please consider these patches. They are based on SVN revision 1636 of
> branch gambas/branches/2.0.
>
> *** app-Makefile.patch
> Changes "ln -s" to "${LN_S}", "gbs" to "gbw" (not sure)

If I remember, I used $(LN_S) and it didn't work. What's the difference
between ${LN_S} and $(LN_S)?

And no, both symbolic links must point at gbs. gbw is just another way to
launch gbs, there is no gbw executable.

>
> *** xdg-utils.patch
> Allows a user to chose not to install with xdg-utils through configure

OK.

Thanks for the patches.

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Proposed patches [SVN:1636 gambas/branches/2.0]

2008-10-07T15:36:04Z

On mercredi 08 octobre 2008, Boian Berberov wrote:
> Gambas Developers,
>
> Please consider these patches. They are based on SVN revision 1636 of
> branch gambas/branches/2.0.
>
> *** app-Makefile.patch
> Changes "ln -s" to "${LN_S}", "gbs" to "gbw" (not sure)

If I remember, I used $(LN_S) and it didn't work. What's the difference
between ${LN_S} and $(LN_S)?

And no, both symbolic links must point at gbs. gbw is just another way to
launch gbs, there is no gbw executable.

>
> *** xdg-utils.patch
> Allows a user to chose not to install with xdg-utils through configure

OK.

Thanks for the patches.

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Proposed patches [SVN:1636 gambas/branches/2.0]

2008-10-07T15:19:11Z

Gambas Developers,

Please consider these patches. They are based on SVN revision 1636 of branch gambas/branches/2.0.

*** app-Makefile.patch
Changes "ln -s" to "${LN_S}", "gbs" to "gbw" (not sure)

*** xdg-utils.patch
Allows a user to chose not to install with xdg-utils through configure

Boian Berberov

app-Makefile.patch (1K) Download Attachment
xdg-utils.patch (1K) Download Attachment

Re: Request: CTRL+DELETE/BACKSPACE

2008-10-05T14:17:11Z

Den Sunday 05 October 2008 21:59:58 skrev Benoit Minisini:
> On samedi 13 septembre 2008, Patrik Karlsson wrote:
> > It would be nice if the editor understood CTRL+DELETE/BACKSPACE to
> > delete the word to the right and left of the cursor.
>
> I forgot to tell that this feature has been implemented in revision #1564.
>

I am glad to hear that.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Request: CTRL+DELETE/BACKSPACE

2008-10-05T12:59:58Z

On samedi 13 septembre 2008, Patrik Karlsson wrote:
> It would be nice if the editor understood CTRL+DELETE/BACKSPACE to
> delete the word to the right and left of the cursor.

I forgot to tell that this feature has been implemented in revision #1564.

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: gb.option What it is used for?

2008-10-04T18:31:30Z

On dimanche 05 octobre 2008, chintan rao wrote:

> On Sat, Oct 4, 2008 at 8:48 PM, Benoit Minisini
>
> <gambas@...> wrote:
> > On jeudi 25 septembre 2008, Stefano Palmeri wrote:
> >> Il giovedì 25 settembre 2008 14:20:01 David Villalobos Cambronero ha
> >
> > scritto:
> >> > Hi all, Does anybody know what gb.option is used for? How can I use
> >> > it? Maybe an small example?
> >> >
> >> > Regards
> >> >
> >> >
> >> > --
> >> > David
> >>
> >> Hi this is the message that the author of gb.option sent me some time
> >> ago. You can find it even in developers-list archives. Benoit, don't you
> >> think it's gonna be useful to add it in Gambas documentation, do you?
> >
> > Anybody can add it if he wants.
>
> I tried to edit this
> http://gambasdoc.org/help/comp/gb.option?v3
> but it asked for password.
>

Tell me which password you want, and I will grant you a write access to the
wiki.

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: gb.option What it is used for?

2008-10-04T18:22:08Z

On Sat, Oct 4, 2008 at 8:48 PM, Benoit Minisini
<gambas@...> wrote:

> On jeudi 25 septembre 2008, Stefano Palmeri wrote:
>> Il giovedì 25 settembre 2008 14:20:01 David Villalobos Cambronero ha
> scritto:
>> > Hi all, Does anybody know what gb.option is used for? How can I use it?
>> > Maybe an small example?
>> >
>> > Regards
>> >
>> >
>> > --
>> > David
>>
>> Hi this is the message that the author of gb.option sent me some time ago.
>> You can find it even in developers-list archives. Benoit, don't you think
>> it's gonna be useful to add it in Gambas documentation, do you?
>>
>
> Anybody can add it if he wants.

I tried to edit this
http://gambasdoc.org/help/comp/gb.option?v3
but it asked for password.

>
> Regards,
>
> --
> Benoit Minisini
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Gambas-devel mailing list
> Gambas-devel@...
> https://lists.sourceforge.net/lists/listinfo/gambas-devel
>

Re: Some wierd gdb behaviour (I think)

2008-10-04T13:06:02Z

Le mardi 30 septembre 2008 14:12:27 Ron, vous avez écrit :

> Ron schreef:
> > Hi,
> >
> > Been trying to debug my program, because after adding some functionality
> > every now and then it crashes (gambas), before that it was rock stable.
> > But upgraded from 2.8.1 to 2.8.2 in the meantime also...
> >
> > I compile and start my program like the website says, this is what I get:
> >
> > -----------------
> > ron@server:~/domotiga/DomotiGa$ gdb gbx2
> > GNU gdb 6.4.90-debian
> > Copyright (C) 2006 Free Software Foundation, Inc.
> > GDB is free software, covered by the GNU General Public License, and you
> > are welcome to change it and/or distribute copies of it under certain
> > conditions.
> > Type "show copying" to see the conditions.
> > There is absolutely no warranty for GDB. Type "show warranty" for
> > details. This GDB was configured as "i486-linux-gnu"...Using host
> > libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1".
> >
> > (gdb) set args -p
> > (gdb) run
> > Starting program: /usr/local/bin/gbx2 -p
> > Failed to read a valid object file image from memory.
> > [Thread debugging using libthread_db enabled]
> > [New Thread -1209992992 (LWP 8372)]
> > [New Thread -1231660112 (LWP 8376)]
> > [New Thread -1242149968 (LWP 8377)]
> > [Thread -1242149968 (zombie) exited]
> > [Thread -1231660112 (LWP 8376) exited]
> > [New Thread -1231660112 (LWP 8378)]
> > [New Thread -1242149968 (LWP 8379)]
> > [New Thread -1250542672 (LWP 8380)]
> > [Thread -1250542672 (zombie) exited]
> > [New Thread -1250542672 (LWP 8381)]
> > open /dev/sequencer: No such file or directory
> > Qt: gdb: -nograb added to command-line options.
> > Use the -dograb option to enforce grabbing.
> > [New Thread -1266635856 (LWP 8385)]
> > [Thread -1266635856 (LWP 8385) exited]
> > [New Thread -1266635856 (LWP 8386)]
> > [Thread -1266635856 (LWP 8386) exited]
> > [New Thread -1266635856 (LWP 8390)]
> > [Thread -1266635856 (LWP 8390) exited]
> > [New Thread -1266635856 (LWP 8391)]
> > [Thread -1266635856 (LWP 8391) exited]
> > Segmentation fault (core dumped)
> > ron@server:~/domotiga/DomotiGa$
> > --------
> >
> > the first thing that worries me, are the 2 zombie threads in the
> > beginning, is this normal?
> >
> > Then when I click a certain menu, which lanches a part of my program
> > which calls rrdtool to generate graphs (SHELL sRRDCmd2 WAIT) were
> > sRRDCmd2 is a large command string which calls rrdtool graph...
> >
> > the gdb session gives Segmentation fault (core dumped)
> > ron@server:~/domotiga/DomotiGa$
> > and the gdb session is closed, my program continues to run...
> >
> > Is this normal? Because I started another program in the shell? My
> > gambas program still runs and functions ok after this...
> > What is wrong? This way I cannot debug my program without removing some
> > functionality first.
> > Did I overlook something?
> >
> > Gambas 2.8.2 on Debian 4.0etch3
> >
> > Wanted to run it as root, but it's a headless server, and cannot get X
> > to run remote for root... will have to look tomorrow...
> > Do you need to run it as root to get the debugging info (see the Failed
> > to read a valid object file image from memory. error)
> >
> > Regards,
> > Ron_2nd
>
> OK,
> so I compiled gdb 6.8 from scratch, and run my program with that, this
> is the first result:
>
> ron@server:~/domotiga/DomotiGa.112ok$ gdb gbx2
> GNU gdb 6.8
> Copyright (C) 2008 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later
> <http://gnu.org/licenses/gpl.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law. Type "show copying"
> and "show warranty" for details.
> This GDB was configured as "i686-pc-linux-gnu"...
> (gdb) set args -p
> (gdb) run
> Starting program: /usr/local/bin/gbx2 -p
> Failed to read a valid object file image from memory.
> [Thread debugging using libthread_db enabled]
> [New Thread 0xb7dca8e0 (LWP 4648)]
> Qt: gdb: -nograb added to command-line options.
> Use the -dograb option to enforce grabbing.
> [New Thread 0xb654cbb0 (LWP 4660)]
> [Thread 0xb654cbb0 (LWP 4660) exited]
> [New Thread 0xb5d4bbb0 (LWP 4661)]
> [Thread 0xb5d4bbb0 (LWP 4661) exited]
> [New Thread 0xb654cbb0 (LWP 4662)]
> [Thread 0xb654cbb0 (LWP 4662) exited]
> [New Thread 0xb654cbb0 (LWP 4666)]
> [Thread 0xb654cbb0 (LWP 4666) exited]
> ...
> [New Thread 0xb654cbb0 (LWP 5586)]
> [Thread 0xb654cbb0 (LWP 5586) exited]
> ...
>
> Program received signal SIGSEGV, Segmentation fault.
> [Switching to Thread 0xb7dca8e0 (LWP 4648)]
> 0xb700e2bb in ?? () from /usr/lib/libcurl.so.3
> (gdb) bt
> #0 0xb700e2bb in ?? () from /usr/lib/libcurl.so.3
> #1 0xb6feefa0 in ?? () from /usr/lib/libcurl.so.3
> #2 0x080d6970 in ?? ()
> #3 0xb7f65ff4 in ?? () from /lib/ld-linux.so.2
> #4 0x080d66d8 in ?? ()
> #5 0x00000001 in ?? ()
> #6 0x00000000 in ?? ()
> (gdb)
>
>
> Ok, so I miss important debug information, dunno why yet, but at least
> gdb itself is not crashing like the 6.4 version did.
> But am I correct to notice the sigsegv is due to problem in/with libcurl?
>
> Any changes in gb.net.curl recently, say last 1 1/2 week?
> Anyone using it in their program?
>
> Will try to weed out the gb.net.curl dependant code from my program, to
> see if this is the only problem.
>
> Any ideas as how to get more debugging info inside my gdb would be fab.
>
> Debian 4.0 etch 3, qt, Gambas 2.99 recent svn
>
> Regards,
> Ron_2nd
>

You need to add too *-dbg related packages to get debugging informations.

Regards,

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: gb.option What it is used for?

2008-10-04T08:18:49Z

On jeudi 25 septembre 2008, Stefano Palmeri wrote:
> Il giovedì 25 settembre 2008 14:20:01 David Villalobos Cambronero ha
scritto:

> > Hi all, Does anybody know what gb.option is used for? How can I use it?
> > Maybe an small example?
> >
> > Regards
> >
> >
> > --
> > David
>
> Hi this is the message that the author of gb.option sent me some time ago.
> You can find it even in developers-list archives. Benoit, don't you think
> it's gonna be useful to add it in Gambas documentation, do you?
>

Anybody can add it if he wants.

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Some wierd gdb behaviour (I think)

2008-09-30T05:12:27Z

Ron schreef:

> Hi,
>
> Been trying to debug my program, because after adding some functionality
> every now and then it crashes (gambas), before that it was rock stable.
> But upgraded from 2.8.1 to 2.8.2 in the meantime also...
>
> I compile and start my program like the website says, this is what I get:
>
> -----------------
> ron@server:~/domotiga/DomotiGa$ gdb gbx2
> GNU gdb 6.4.90-debian
> Copyright (C) 2006 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and you are
> welcome to change it and/or distribute copies of it under certain
> conditions.
> Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB. Type "show warranty" for details.
> This GDB was configured as "i486-linux-gnu"...Using host libthread_db
> library "/lib/tls/i686/cmov/libthread_db.so.1".
>
> (gdb) set args -p
> (gdb) run
> Starting program: /usr/local/bin/gbx2 -p
> Failed to read a valid object file image from memory.
> [Thread debugging using libthread_db enabled]
> [New Thread -1209992992 (LWP 8372)]
> [New Thread -1231660112 (LWP 8376)]
> [New Thread -1242149968 (LWP 8377)]
> [Thread -1242149968 (zombie) exited]
> [Thread -1231660112 (LWP 8376) exited]
> [New Thread -1231660112 (LWP 8378)]
> [New Thread -1242149968 (LWP 8379)]
> [New Thread -1250542672 (LWP 8380)]
> [Thread -1250542672 (zombie) exited]
> [New Thread -1250542672 (LWP 8381)]
> open /dev/sequencer: No such file or directory
> Qt: gdb: -nograb added to command-line options.
> Use the -dograb option to enforce grabbing.
> [New Thread -1266635856 (LWP 8385)]
> [Thread -1266635856 (LWP 8385) exited]
> [New Thread -1266635856 (LWP 8386)]
> [Thread -1266635856 (LWP 8386) exited]
> [New Thread -1266635856 (LWP 8390)]
> [Thread -1266635856 (LWP 8390) exited]
> [New Thread -1266635856 (LWP 8391)]
> [Thread -1266635856 (LWP 8391) exited]
> Segmentation fault (core dumped)
> ron@server:~/domotiga/DomotiGa$
> --------
>
> the first thing that worries me, are the 2 zombie threads in the
> beginning, is this normal?
>
> Then when I click a certain menu, which lanches a part of my program
> which calls rrdtool to generate graphs (SHELL sRRDCmd2 WAIT) were
> sRRDCmd2 is a large command string which calls rrdtool graph...
>
> the gdb session gives Segmentation fault (core dumped)
> ron@server:~/domotiga/DomotiGa$
> and the gdb session is closed, my program continues to run...
>
> Is this normal? Because I started another program in the shell? My
> gambas program still runs and functions ok after this...
> What is wrong? This way I cannot debug my program without removing some
> functionality first.
> Did I overlook something?
>
> Gambas 2.8.2 on Debian 4.0etch3
>
> Wanted to run it as root, but it's a headless server, and cannot get X
> to run remote for root... will have to look tomorrow...
> Do you need to run it as root to get the debugging info (see the Failed
> to read a valid object file image from memory. error)
>
> Regards,
> Ron_2nd
>
>

OK,
so I compiled gdb 6.8 from scratch, and run my program with that, this
is the first result:

ron@server:~/domotiga/DomotiGa.112ok$ gdb gbx2
GNU gdb 6.8
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu"...
(gdb) set args -p
(gdb) run
Starting program: /usr/local/bin/gbx2 -p
Failed to read a valid object file image from memory.
[Thread debugging using libthread_db enabled]
[New Thread 0xb7dca8e0 (LWP 4648)]
Qt: gdb: -nograb added to command-line options.
Use the -dograb option to enforce grabbing.
[New Thread 0xb654cbb0 (LWP 4660)]
[Thread 0xb654cbb0 (LWP 4660) exited]
[New Thread 0xb5d4bbb0 (LWP 4661)]
[Thread 0xb5d4bbb0 (LWP 4661) exited]
[New Thread 0xb654cbb0 (LWP 4662)]
[Thread 0xb654cbb0 (LWP 4662) exited]
[New Thread 0xb654cbb0 (LWP 4666)]
[Thread 0xb654cbb0 (LWP 4666) exited]
...
[New Thread 0xb654cbb0 (LWP 5586)]
[Thread 0xb654cbb0 (LWP 5586) exited]
...

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb7dca8e0 (LWP 4648)]
0xb700e2bb in ?? () from /usr/lib/libcurl.so.3
(gdb) bt
#0 0xb700e2bb in ?? () from /usr/lib/libcurl.so.3
#1 0xb6feefa0 in ?? () from /usr/lib/libcurl.so.3
#2 0x080d6970 in ?? ()
#3 0xb7f65ff4 in ?? () from /lib/ld-linux.so.2
#4 0x080d66d8 in ?? ()
#5 0x00000001 in ?? ()
#6 0x00000000 in ?? ()
(gdb)

Ok, so I miss important debug information, dunno why yet, but at least
gdb itself is not crashing like the 6.4 version did.
But am I correct to notice the sigsegv is due to problem in/with libcurl?

Any changes in gb.net.curl recently, say last 1 1/2 week?
Anyone using it in their program?

Will try to weed out the gb.net.curl dependant code from my program, to
see if this is the only problem.

Any ideas as how to get more debugging info inside my gdb would be fab.

Debian 4.0 etch 3, qt, Gambas 2.99 recent svn

Regards,
Ron_2nd

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Some wierd gdb behaviour (I think)

2008-09-29T05:34:37Z

Ron schreef:

>
> Hi,
>
> Been trying to debug my program, because after adding some
> functionality every now and then it crashes (gambas), before that it
> was rock stable.
> But upgraded from 2.8.1 to 2.8.2 in the meantime also...
>
> I compile and start my program like the website says, this is what I get:
>
> -----------------
> ron@server:~/domotiga/DomotiGa$ gdb gbx2
> GNU gdb 6.4.90-debian
> Copyright (C) 2006 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and
> you are
> welcome to change it and/or distribute copies of it under certain
> conditions.
> Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB. Type "show warranty" for
> details.
> This GDB was configured as "i486-linux-gnu"...Using host libthread_db
> library "/lib/tls/i686/cmov/libthread_db.so.1".
>
> (gdb) set args -p
> (gdb) run
> Starting program: /usr/local/bin/gbx2 -p
> Failed to read a valid object file image from memory.
> [Thread debugging using libthread_db enabled]
> [New Thread -1209992992 (LWP 8372)]
> [New Thread -1231660112 (LWP 8376)]
> [New Thread -1242149968 (LWP 8377)]
> [Thread -1242149968 (zombie) exited]
> [Thread -1231660112 (LWP 8376) exited]
> [New Thread -1231660112 (LWP 8378)]
> [New Thread -1242149968 (LWP 8379)]
> [New Thread -1250542672 (LWP 8380)]
> [Thread -1250542672 (zombie) exited]
> [New Thread -1250542672 (LWP 8381)]
> open /dev/sequencer: No such file or directory
> Qt: gdb: -nograb added to command-line options.
> Use the -dograb option to enforce grabbing.
> [New Thread -1266635856 (LWP 8385)]
> [Thread -1266635856 (LWP 8385) exited]
> [New Thread -1266635856 (LWP 8386)]
> [Thread -1266635856 (LWP 8386) exited]
> [New Thread -1266635856 (LWP 8390)]
> [Thread -1266635856 (LWP 8390) exited]
> [New Thread -1266635856 (LWP 8391)]
> [Thread -1266635856 (LWP 8391) exited]
> Segmentation fault (core dumped)
> ron@server:~/domotiga/DomotiGa$
> --------
>
> the first thing that worries me, are the 2 zombie threads in the
> beginning, is this normal?
>
> Then when I click a certain menu, which lanches a part of my program
> which calls rrdtool to generate graphs (SHELL sRRDCmd2 WAIT) were
> sRRDCmd2 is a large command string which calls rrdtool graph...
>
> the gdb session gives Segmentation fault (core dumped)
> ron@server:~/domotiga/DomotiGa$
> and the gdb session is closed, my program continues to run...
>
> Is this normal? Because I started another program in the shell? My
> gambas program still runs and functions ok after this...
> What is wrong? This way I cannot debug my program without removing
> some functionality first.
> Did I overlook something?
>
> Gambas 2.8.2 on Debian 4.0etch3
>
> Wanted to run it as root, but it's a headless server, and cannot get X
> to run remote for root... will have to look tomorrow...
> Do you need to run it as root to get the debugging info (see the
> Failed to read a valid object file image from memory. error)
>
> Regards,
> Ron_2nd
>
>

No one with any help/pointers?

Gambas 2 (even latest svn) crashes every few minutes here with signal
11, even older versions of my project.
Debian etch's gdb is f@Y&* up, so it doesn't give me a backtrace... it
even drops me to the shell prompt with my program still running.

My project development has halted for a week now, still trying to
pinpoint with project part is giving me troubles.
I'm even considering abandoning gambas alltogether, it's simply not
stable/usable anymore.
Would be a pitty...

Regards,
Ron

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Signal 11 on Gambas 3 r1542

2008-09-29T05:24:23Z

Hi, it works just fine...

Regards

--
David

----- Original Message ----
From: Benoit Minisini <gambas@...>
To: mailing list for gambas developers <gambas-devel@...>
Sent: Thursday, September 25, 2008 5:57:32 PM
Subject: Re: [Gambas-devel] Signal 11 on Gambas 3 r1542

On vendredi 26 septembre 2008, Benoit Minisini wrote:

> On lundi 08 septembre 2008, David Villalobos Cambronero wrote:
> > Hi Benoit:
> > I got a signal 11 with my project. Attached the BackTrace and the
> > project and a schema.
> >
> > Steps to reproduce the error:
> > 1.Go to FTest.Class and provide a root password to connect
> > 2.Then you will see the main form, click the Catalogs label, if all was
> > fine you will see a list of all your databases. 3.Select one database
> > that has Views, Triggers, Procedures (If you restore the schema for
> > sakila, you will have all you nedd). 4.Then select the name of a View and
> > try to delete it, by using the toolbutton or the “Del” key, the item will
> > be deleted but at the end of the refresh I got a signal 11.
> >
> > Hope I was clear enough.
> >
> > By the way, I use Mandriva 2008.1 64bits and QT.
> >
> > Best regards
> >
> > David
>
> Yes, that crashes. I will look at it... Beware that all recent updates and
> bug fixes of 2.x were not ported in 3.0!
>
> Regards,

Try the revision #1602, it should fix the problem. It may introduce others, I
must deeper. :-)

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Error compiling Gambas

2008-09-27T08:30:32Z

Ok, it compiles fine...

Regards

--
David

----- Original Message ----
From: Benoit Minisini <gambas@...>
To: mailing list for gambas developers <gambas-devel@...>
Sent: Saturday, September 27, 2008 8:17:58 AM
Subject: Re: [Gambas-devel] Error compiling Gambas

On samedi 27 septembre 2008, David Villalobos Cambronero wrote:

> I got this error when compiling Gambas 3 v1610 on Mandriva 64Bits
>
> Registering Gambas server page mimetype
> xdg-icon-resource: file
> '/usr/local/share/gambas3/icons/application-x-gambasserverpage.png' does
> not exist xdg-mime: file './mime/application-x-gambasserverpage.xml' does
> not exist make[2]: *** [install-exec-local] Error 2
> make[2]: se sale del directorio `/home/david/Gambas/trunk/app'
> make[1]: *** [install-am] Error 2
> make[1]: se sale del directorio `/home/david/Gambas/trunk/app'
> make: *** [install-recursive] Error 1
>
> Any Idea?
>
> Regrads
>
>
> --
> David
>

It should be fixed in revision #1611.

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Error compiling Gambas

2008-09-27T07:17:58Z

On samedi 27 septembre 2008, David Villalobos Cambronero wrote:

Re: Error compiling Gambas

2008-09-27T07:15:33Z

On samedi 27 septembre 2008, David Villalobos Cambronero wrote:

I just forgot to add the files to the repository.

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Error compiling Gambas

2008-09-27T07:10:34Z

I got this error when compiling Gambas 3 v1610 on Mandriva 64Bits

Registering Gambas server page mimetype
xdg-icon-resource: file '/usr/local/share/gambas3/icons/application-x-gambasserverpage.png' does not exist
xdg-mime: file './mime/application-x-gambasserverpage.xml' does not exist
make[2]: *** [install-exec-local] Error 2
make[2]: se sale del directorio `/home/david/Gambas/trunk/app'
make[1]: *** [install-am] Error 2
make[1]: se sale del directorio `/home/david/Gambas/trunk/app'
make: *** [install-recursive] Error 1

Any Idea?

Regrads

--
David

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: gb.option What it is used for?

2008-09-26T00:49:16Z

Hi,

Any suggestions for improvement of interface is always welcome.

DIM opt AS NEW GetOptions("la:b:c:")
At this point you may really feel that GetOptions must be static class
( I don't remember why I made it non static. This component right now is in
beta stage :) . )

if colon (ie ":") is specified after a character c, it means that the
option must be be followed by an argument and opt[c] will be the
argument specified after "-c" switch.
if ":" is not specified opt[c] will be 0 or 1 depending on existence
of "-c" switch in the command line argument.
Also opt["?"] is 1 if there is an error in specifying the command line arguments

PUBLIC SUB Main()
DIM opt AS NEW GetOptions("la:b:c:")

IF opt["?"] = 1
PRINT "error parsing the arguments"
ENDIF

IF opt["l"] = 1
PRINT "found option l"
ENDIF

IF opt["a"] <> 1 AND opt["a"] <> 0
PRINT opt["a"]
ENDIF

IF opt["b"] <> 1 AND opt["a"] <> 0
PRINT opt["b"]
ENDIF

IF opt["c"] <> 1 AND opt["c"] <> 0
PRINT opt["c"]
ENDIF

END

Also there is a way in which you can list the opts one by one.

' Gambas module file

PUBLIC SUB Main()

DIM opt AS NEW GetOptions("h:elo")
DIM c AS String
PRINT "command line args:\"" & opt.CommandLineArgs.Join(" ") & "\""

WHILE TRUE
c = opt.NextValidOption()
PRINT opt.OptionArgument()

IF c = ""
BREAK
ENDIF

SELECT CASE c

CASE "h"
PRINT "option h" & " the corresponding argument is\"" &
opt.OptionArgument() & "\""

CASE "e"
PRINT "option e"

CASE "l"
PRINT "option l"

CASE "o"
PRINT "option o"

CASE "?"
PRINT "error parsing the arguments"
PRINT "invalid option " & opt.GetErrorOption()
BREAK

CASE ":"
PRINT "error parsing the arguments"
PRINT "no arguments to option " & opt.GetErrorOption()

END SELECT

WEND

IF opt.RestOfArgs().Count <> 0
PRINT "Rest of the arguments are \"" & opt.RestOfArgs().Join(" ")&
"\""
ENDIF
END

Regards,
Chintan Rao H

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: gb.option What it is used for?

2008-09-26T00:35:02Z

Hi,

On Thu, Sep 25, 2008 at 5:20 AM, David Villalobos Cambronero
<david_villalobos_c@...> wrote:
> Hi all, Does anybody know what gb.option is used for? How can I use it? Maybe an small example?
Its just a module to parse the command line arguments.
I developed this long ago. Nearly about 1.5 years back. After that I
did not seem to have time for this. Its seems to be buggy :(.
Will send you an example soon. :).

>
> Regards
>
>
> --
> David
>
>
>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Gambas-devel mailing list
> Gambas-devel@...
> https://lists.sourceforge.net/lists/listinfo/gambas-devel
>

Re: Signal 11 on Gambas 3 r1542

2008-09-25T16:57:32Z

On vendredi 26 septembre 2008, Benoit Minisini wrote:

Re: Signal 11 on Gambas 3 r1542

2008-09-25T16:20:53Z

On lundi 08 septembre 2008, David Villalobos Cambronero wrote:

> Hi Benoit:
> I got a signal 11 with my project. Attached the BackTrace and the
> project and a schema.
>
> Steps to reproduce the error:
> 1.Go to FTest.Class and provide a root password to connect
> 2.Then you will see the main form, click the Catalogs label, if all was
> fine you will see a list of all your databases. 3.Select one database that
> has Views, Triggers, Procedures (If you restore the schema for sakila, you
> will have all you nedd). 4.Then select the name of a View and try to delete
> it, by using the toolbutton or the “Del” key, the item will be deleted but
> at the end of the refresh I got a signal 11.
>
> Hope I was clear enough.
>
> By the way, I use Mandriva 2008.1 64bits and QT.
>
> Best regards
>
> David

Yes, that crashes. I will look at it... Beware that all recent updates and bug
fixes of 2.x were not ported in 3.0!

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: gb.option What it is used for?

2008-09-25T13:36:31Z

Il giovedì 25 settembre 2008 14:20:01 David Villalobos Cambronero ha scritto:
> Hi all, Does anybody know what gb.option is used for? How can I use it?
> Maybe an small example?
>
> Regards
>
>
> --
> David
>

Hi.

This is the message that the author of gb.option sent me some time ago.
You can find it in developers-list archives too. Benoit, don't you think
it's gonna be useful to add it in Gambas documentation, do you?

--------8X--------------------------------

Hi,
Documentation for this is not currently available. Currently I don't
have time as I am involved in some other project. But I will be
writing one as soon as I am free. i hope I will be free soon.

Tell me if you find this interface annoying. I will change it when I
have time to do so
I think I must make the thing simpler.

You declare the opt object as

DIM opt AS NEW GetOptions("la:b:c:")

At this point you may really feel that GetOptions must be static class
( I don't remember why made no static. This component right now is in
beta stage :) . )

if colon (ie ":") is specified after a character c, it means that that
option must be be followed by an argument opt[c] will be the argument.
if ":" is not specified it will be a opt[c] will 0 or 1
also opt["?"] is 1 if there is an error in specifying the command line
arguments

PUBLIC SUB Main()
DIM opt AS NEW GetOptions("la:b:c:")

IF opt["?"] = 1
PRINT "error parsing the arguments"
ENDIF

IF opt["l"] = 1
PRINT "found option l"
ENDIF

IF opt["a"] <> 1 AND opt["a"] <> 0
PRINT opt["a"]
ENDIF

IF opt["b"] <> 1 AND opt["a"] <> 0
PRINT opt["b"]
ENDIF

IF opt["c"] <> 1 AND opt["c"] <> 0
PRINT opt["c"]
ENDIF

END

Also there is a way in which you can list the opts one by one.

' Gambas module file

PUBLIC SUB Main()

DIM opt AS NEW GetOptions("h:elo")
DIM c AS String
PRINT "command line args:\"" & opt.CommandLineArgs.Join(" ") & "\""

WHILE TRUE
c = opt.NextValidOption()
PRINT opt.OptionArgument()

IF c = ""
BREAK
ENDIF

SELECT CASE c

CASE "h"
PRINT "option h" & " the corresponding argument is\"" &
opt.OptionArgument() & "\""

CASE "e"
PRINT "option e"

CASE "l"
PRINT "option l"

CASE "o"
PRINT "option o"

CASE "?"
PRINT "error parsing the arguments"
PRINT "invalid option " & opt.GetErrorOption()
BREAK

CASE ":"
PRINT "error parsing the arguments"
PRINT "no arguments to option " & opt.GetErrorOption()

END SELECT

WEND

IF opt.RestOfArgs().Count <> 0
PRINT "Rest of the arguments are \"" & opt.RestOfArgs().Join(" ")&
"\""
ENDIF
END

>
>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge Build the coolest Linux based applications with Moblin SDK & win
> great prizes Grand prize is a trip for two to an Open Source event anywhere
> in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Gambas-devel mailing list
> Gambas-devel@...
> https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: gb.option What it is used for?

2008-09-25T07:49:28Z

Il giovedì 25 settembre 2008 14:20:01 David Villalobos Cambronero ha scritto:
> Hi all, Does anybody know what gb.option is used for? How can I use it?
> Maybe an small example?
>
> Regards
>
>
> --
> David
>

Hi this is the message that the author of gb.option sent me some time ago.
You can find it even in developers-list archives. Benoit, don't you think
it's gonna be useful to add it in Gambas documentation, do you?

--------8X--------------------------------

Hi,
Documentation for this is not currently available. Currently I don't
have time as I am involved in some other project. But I will be
writing one as soon as I am free. i hope I will be free soon.

Tell me if you find this interface annoying. I will change it when I
have time to do so
I think I must make the thing simpler.

You declare the opt object as

DIM opt AS NEW GetOptions("la:b:c:")

At this point you may really feel that GetOptions must be static class
( I don't remember why made no static. This component right now is in
beta stage :) . )

if colon (ie ":") is specified after a character c, it means that that
option must be be followed by an argument opt[c] will be the argument.
if ":" is not specified it will be a opt[c] will 0 or 1
also opt["?"] is 1 if there is an error in specifying the command line
arguments

PUBLIC SUB Main()
DIM opt AS NEW GetOptions("la:b:c:")

IF opt["?"] = 1
PRINT "error parsing the arguments"
ENDIF

IF opt["l"] = 1
PRINT "found option l"
ENDIF

IF opt["a"] <> 1 AND opt["a"] <> 0
PRINT opt["a"]
ENDIF

IF opt["b"] <> 1 AND opt["a"] <> 0
PRINT opt["b"]
ENDIF

IF opt["c"] <> 1 AND opt["c"] <> 0
PRINT opt["c"]
ENDIF

END

Also there is a way in which you can list the opts one by one.

' Gambas module file

PUBLIC SUB Main()

DIM opt AS NEW GetOptions("h:elo")
DIM c AS String
PRINT "command line args:\"" & opt.CommandLineArgs.Join(" ") & "\""

WHILE TRUE
c = opt.NextValidOption()
PRINT opt.OptionArgument()

IF c = ""
BREAK
ENDIF

SELECT CASE c

CASE "h"
PRINT "option h" & " the corresponding argument is\"" &
opt.OptionArgument() & "\""

CASE "e"
PRINT "option e"

CASE "l"
PRINT "option l"

CASE "o"
PRINT "option o"

CASE "?"
PRINT "error parsing the arguments"
PRINT "invalid option " & opt.GetErrorOption()
BREAK

CASE ":"
PRINT "error parsing the arguments"
PRINT "no arguments to option " & opt.GetErrorOption()

END SELECT

WEND

IF opt.RestOfArgs().Count <> 0
PRINT "Rest of the arguments are \"" & opt.RestOfArgs().Join(" ")&
"\""
ENDIF
END

gb.option What it is used for?

2008-09-25T05:20:01Z

Hi all, Does anybody know what gb.option is used for? How can I use it? Maybe an small example?

Regards

--
David

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Some wierd gdb behaviour (I think)

2008-09-22T12:49:30Z

Hi,

Been trying to debug my program, because after adding some functionality
every now and then it crashes (gambas), before that it was rock stable.
But upgraded from 2.8.1 to 2.8.2 in the meantime also...

I compile and start my program like the website says, this is what I get:

-----------------
ron@server:~/domotiga/DomotiGa$ gdb gbx2
GNU gdb 6.4.90-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i486-linux-gnu"...Using host libthread_db
library "/lib/tls/i686/cmov/libthread_db.so.1".

(gdb) set args -p
(gdb) run
Starting program: /usr/local/bin/gbx2 -p
Failed to read a valid object file image from memory.
[Thread debugging using libthread_db enabled]
[New Thread -1209992992 (LWP 8372)]
[New Thread -1231660112 (LWP 8376)]
[New Thread -1242149968 (LWP 8377)]
[Thread -1242149968 (zombie) exited]
[Thread -1231660112 (LWP 8376) exited]
[New Thread -1231660112 (LWP 8378)]
[New Thread -1242149968 (LWP 8379)]
[New Thread -1250542672 (LWP 8380)]
[Thread -1250542672 (zombie) exited]
[New Thread -1250542672 (LWP 8381)]
open /dev/sequencer: No such file or directory
Qt: gdb: -nograb added to command-line options.
Use the -dograb option to enforce grabbing.
[New Thread -1266635856 (LWP 8385)]
[Thread -1266635856 (LWP 8385) exited]
[New Thread -1266635856 (LWP 8386)]
[Thread -1266635856 (LWP 8386) exited]
[New Thread -1266635856 (LWP 8390)]
[Thread -1266635856 (LWP 8390) exited]
[New Thread -1266635856 (LWP 8391)]
[Thread -1266635856 (LWP 8391) exited]
Segmentation fault (core dumped)
ron@server:~/domotiga/DomotiGa$
--------

the first thing that worries me, are the 2 zombie threads in the
beginning, is this normal?

Then when I click a certain menu, which lanches a part of my program
which calls rrdtool to generate graphs (SHELL sRRDCmd2 WAIT) were
sRRDCmd2 is a large command string which calls rrdtool graph...

the gdb session gives Segmentation fault (core dumped)
ron@server:~/domotiga/DomotiGa$
and the gdb session is closed, my program continues to run...

Is this normal? Because I started another program in the shell? My
gambas program still runs and functions ok after this...
What is wrong? This way I cannot debug my program without removing some
functionality first.
Did I overlook something?

Gambas 2.8.2 on Debian 4.0etch3

Wanted to run it as root, but it's a headless server, and cannot get X
to run remote for root... will have to look tomorrow...
Do you need to run it as root to get the debugging info (see the Failed
to read a valid object file image from memory. error)

Regards,
Ron_2nd

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Good news

2008-09-17T14:35:29Z

Now you can download on the GambasForge site ... it work !

http://www.gambasforge.net

Currently i'm working to reimplement users part, the you will be able
to connect to the site and add new sources.

You have any ideas of what you want to the biggest communautary site
... tell me , or join us,

Gambasforge will be able to manage: sources, tutorial, forum, and so
on ... and surely more :)

Tell us ... the gambasforge code is now on sourceforge,

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Feature request

2008-09-17T05:25:04Z

2008/9/17 Benoit Minisini <gambas@...>:

> On mercredi 17 septembre 2008, Fabien Bodard wrote:
>> yes... but before let the possibility to users to make components ...
>> i think and i repeat this since too many time now, it is now impostant
>> to implement namespace.
>>
>>
>> mylib.myclass.myproc
>>
>>
>> and change a little bit inheritance way as the current one is
>> interesting for it's magic auto replace (surcharge en français.. hem)
>>
>> but... i can't imagin let to users the ability to make own class before
>> that.
>>
>> i've already the problem now ... as i need to call some class the same
>> as others ... ex: Connection is valuable for net, dbus ...
>>
>> Format is valuable for a nameclass that manage (format s)
>>
>> is there a way to doing that, but with no too many complex ways ... Benoit
>> ?
>>
>
> I don't see the relation between your post and David's one.
>
> Anyway I don't like namespaces, so I don't think I will implement them.
> Namespaces allow to avoid thinking on its class names, and makes the user
> brain work more.

Mine work well ... so i think i have to think to wrote the class
hineritance system in BIG LETTER, to be sure that is not fool man that
mistake and make conflict.

My dbus class is named DBUSConnection for info.

it's a way ... Virtualspacename in Ucase...

But maybe you can rename the db class name too to DBConnection ... it
will be more understandable. DBResult, etc

Fabien

> Regards,
>
> --
> Benoit Minisini
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Gambas-devel mailing list
> Gambas-devel@...
> https://lists.sourceforge.net/lists/listinfo/gambas-devel
>

Re: Feature request

2008-09-17T05:20:16Z

Ohhh my fault, I tought it was easiers.. but thanks... let's wait a litte bit.. :)

Saludos

--
David

----- Original Message ----
From: Benoit Minisini <gambas@...>
To: mailing list for gambas developers <gambas-devel@...>
Sent: Wednesday, September 17, 2008 5:49:11 AM
Subject: Re: [Gambas-devel] Feature request

On mardi 16 septembre 2008, David Villalobos Cambronero wrote:

> Hi Benoit:
>
> I think It will be cool to have the possibility to install a component
> (created with Gambas) in the Gambas installation folder, so all users can
> use it. In both cases, making executable (FMakeExecutable) and making the
> package (FMakeInstall).
>
> What do you think?
>
> If I had the knowledge in autotools to make it, I'll but I don't have
> it.
>
> Best regards.
>
> David
>

At the moment, the IDE can only package projects, not components. But the
feature is planned.

Not that tt is not just autotools, but every other way of packaging a
component that must be implemented (rpm, deb, slackware, autotools).

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Feature request

2008-09-17T04:52:39Z

On mercredi 17 septembre 2008, Fabien Bodard wrote:

> yes... but before let the possibility to users to make components ...
> i think and i repeat this since too many time now, it is now impostant
> to implement namespace.
>
>
> mylib.myclass.myproc
>
>
> and change a little bit inheritance way as the current one is
> interesting for it's magic auto replace (surcharge en français.. hem)
>
> but... i can't imagin let to users the ability to make own class before
> that.
>
> i've already the problem now ... as i need to call some class the same
> as others ... ex: Connection is valuable for net, dbus ...
>
> Format is valuable for a nameclass that manage (format s)
>
> is there a way to doing that, but with no too many complex ways ... Benoit
> ?
>

I don't see the relation between your post and David's one.

Anyway I don't like namespaces, so I don't think I will implement them.
Namespaces allow to avoid thinking on its class names, and makes the user
brain work more.

Regards,

--
Benoit Minisini

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Gambas-devel mailing list
Gambas-devel@...
https://lists.sourceforge.net/lists/listinfo/gambas-devel

Re: Feature request

2008-09-17T04:49:11Z

On mardi 16 septembre 2008, David Villalobos Cambronero wrote: