|
compiz on debian, no window borders shown
Hi guys:
I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but after I executed "compiz --replace", the following messages are returned:
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:042b (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
...........
the 3D desktop is working(rotating), but without the window borders, which means one window is overlaped with each other. Thus I can not resize or move it. Can anyone tell the problems?
I installed the following related packages(maybe some already there not listed) and attached the display card info with xorg.conf:
#######compiz##############:
compiz install
compiz-core install
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
compiz-gnome install
compiz-gtk install
compiz-plugins install
compizconfig-settings-manager install
libcompizconfig0 install
python-compizconfig install
#######ccompiz-fusion##############:
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
fusion-icon install
#######mesa##############:
libgl1-mesa-dev install
libgl1-mesa-dri install
libgl1-mesa-glx install
mesa-common-dev install
mesa-utils install
####### lspci ##############:
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 135M (rev a1)
#######xorg.conf##############:
Section "Extensions"
Option "Composite" "true"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "XAANoOffscreenPixmaps" "true"
Option "AllowGLXWithComposite" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "AddARGBGLXVisuals" "True"
EndSection
##############################
Thanks very much!!
M.Y.
|
|
Re: compiz on debian, no window borders shown
I've had lots of trouble with compiz on lenny, most of them can be solved by downloading the latest driver for you graphics card and installing fusion-icon. fusion-icon will call compiz with the parameters it judges to be right, and most
of the time, they are indeed correct. You should also try installing emerald (although it's not in the official debian repos anymore). On Thu, May 15, 2008 at 6:11 PM, Michael Yang < michael.yxf@...> wrote:
Hi guys:
I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but after I executed "compiz --replace", the following messages are returned:
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:042b (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
...........
the 3D desktop is working(rotating), but without the window borders, which means one window is overlaped with each other. Thus I can not resize or move it. Can anyone tell the problems?
I installed the following related packages(maybe some already there not listed) and attached the display card info with xorg.conf:
#######compiz##############:
compiz install
compiz-core install
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
compiz-gnome install
compiz-gtk install
compiz-plugins install
compizconfig-settings-manager install
libcompizconfig0 install
python-compizconfig install
#######ccompiz-fusion##############:
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
fusion-icon install
#######mesa##############:
libgl1-mesa-dev install
libgl1-mesa-dri install
libgl1-mesa-glx install
mesa-common-dev install
mesa-utils install
####### lspci ##############:
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 135M (rev a1)
#######xorg.conf##############:
Section "Extensions"
Option "Composite" "true"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "XAANoOffscreenPixmaps" "true"
Option "AllowGLXWithComposite" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "AddARGBGLXVisuals" "True"
EndSection
##############################
Thanks very much!!
M.Y.
-- Miguel Fco. A. de Mattos Gaiowski
|
|
Re: compiz on debian, no window borders shown
On Thu, 2008-05-15 at 17:11 -0400, Michael Yang wrote:
Hi guys:
I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but after I executed "compiz --replace", the following messages are returned:
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:042b (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
...........
the 3D desktop is working(rotating), but without the window borders, which means one window is overlaped with each other. Thus I can not resize or move it. Can anyone tell the problems?
I installed the following related packages(maybe some already there not listed) and attached the display card info with xorg.conf:
#######compiz##############:
compiz install
compiz-core install
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
compiz-gnome install
compiz-gtk install
compiz-plugins install
compizconfig-settings-manager install
libcompizconfig0 install
python-compizconfig install
#######ccompiz-fusion##############:
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
fusion-icon install
#######mesa##############:
libgl1-mesa-dev install
libgl1-mesa-dri install
libgl1-mesa-glx install
mesa-common-dev install
mesa-utils install
####### lspci ##############:
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 135M (rev a1)
#######xorg.conf##############:
Section "Extensions"
Option "Composite" "true"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "XAANoOffscreenPixmaps" "true"
Option "AllowGLXWithComposite" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "AddARGBGLXVisuals" "True"
EndSection
##############################
Thanks very much!!
M.Y.
It seems to that your Nvidia GLX isn't working, try running 'glxgears' (in the mesa-utils package) from a terminal, this problably won't work then.
Check your Nvidia X Server Settings / OpenGL/GLX Information. If No GLX Extensions are shown in the top right box you'll have to update your driver. I use version 169.12 and everything works fine, but you'll have to check if your card is supprted. For some more info on your xorg.conf check this link: http://forum.compiz-fusion.org/showthread.php?t=7940
Also, I start compiz using 'compiz --replace ccp'
|
|
Re: compiz on debian, no window borders shown
On Thu, May 15, 2008 at 05:11:06PM -0400, Michael Yang wrote:
> I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but
> after I executed "compiz --replace", the following messages are
> returned:
IMHO, the compiz packages have a missing dependency on the compiz-fusion
packages. Without compiz-fusion plugins, compiz isn't decorating the
windows properly or breaking window management in some other way.
In short, I had the same problem, installed compiz-fusion-plugins and
compiz-fusion-plugins-extra, and things seemed to work after that.
--
"Oh, look: rocks!"
-- Doctor Who, "Destiny of the Daleks"
--
To UNSUBSCRIBE, email to debian-user-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...
|
|
Re: compiz on debian, no window borders shown
On Thu, May 15, 2008 at 5:17 PM, Miguel Gaiowski < miggaiowski@...> wrote:
I've had lots of trouble with compiz on lenny, most of them can be solved by
downloading the latest driver for you graphics card and installing fusion-icon.
fusion-icon will call compiz with the parameters it judges to be right, and most
of the time, they are indeed correct.
You should also try installing emerald (although it's not in the official debian repos anymore). Thanks a lot. I haven't updated the driver of my graphics card since it's been working quite well.
I have installed fusion-icon and emerald as well, it seems now working well except some issues on auto -startup
On Thu, May 15, 2008 at 6:11 PM, Michael Yang < michael.yxf@...> wrote:
Hi guys:
I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but after I executed "compiz --replace", the following messages are returned:
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:042b (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
...........
the 3D desktop is working(rotating), but without the window borders, which means one window is overlaped with each other. Thus I can not resize or move it. Can anyone tell the problems?
I installed the following related packages(maybe some already there not listed) and attached the display card info with xorg.conf:
#######compiz##############:
compiz install
compiz-core install
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
compiz-gnome install
compiz-gtk install
compiz-plugins install
compizconfig-settings-manager install
libcompizconfig0 install
python-compizconfig install
#######ccompiz-fusion##############:
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
fusion-icon install
#######mesa##############:
libgl1-mesa-dev install
libgl1-mesa-dri install
libgl1-mesa-glx install
mesa-common-dev install
mesa-utils install
####### lspci ##############:
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 135M (rev a1)
#######xorg.conf##############:
Section "Extensions"
Option "Composite" "true"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "XAANoOffscreenPixmaps" "true"
Option "AllowGLXWithComposite" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "AddARGBGLXVisuals" "True"
EndSection
##############################
Thanks very much!!
M.Y.
Miguel Fco. A. de Mattos Gaiowski
|
|
Re: compiz on debian, no window borders shown
On Thu, May 15, 2008 at 6:20 PM, Peter van der Wal < debian_mailing@...> wrote:
On Thu, 2008-05-15 at 17:11 -0400, Michael Yang wrote:
Hi guys:
I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but after I executed "compiz --replace", the following messages are returned:
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:042b (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
...........
the 3D desktop is working(rotating), but without the window borders, which means one window is overlaped with each other. Thus I can not resize or move it. Can anyone tell the problems?
I installed the following related packages(maybe some already there not listed) and attached the display card info with xorg.conf:
#######compiz##############:
compiz install
compiz-core install
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
compiz-gnome install
compiz-gtk install
compiz-plugins install
compizconfig-settings-manager install
libcompizconfig0 install
python-compizconfig install
#######ccompiz-fusion##############:
compiz-fusion-plugins-extra install
compiz-fusion-plugins-main install
fusion-icon install
#######mesa##############:
libgl1-mesa-dev install
libgl1-mesa-dri install
libgl1-mesa-glx install
mesa-common-dev install
mesa-utils install
####### lspci ##############:
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 135M (rev a1)
#######xorg.conf##############:
Section "Extensions"
Option "Composite" "true"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "XAANoOffscreenPixmaps" "true"
Option "AllowGLXWithComposite" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
Option "AddARGBGLXVisuals" "True"
EndSection
##############################
Thanks very much!!
M.Y.
It seems to that your Nvidia GLX isn't working, try running 'glxgears' (in the mesa-utils package) from a terminal, this problably won't work then.
Check your Nvidia X Server Settings / OpenGL/GLX Information. If No GLX Extensions are shown in the top right box you'll have to update your driver. I use version 169.12 and everything works fine, but you'll have to check if your card is supprted. For some more info on your xorg.conf check this link: http://forum.compiz-fusion.org/showthread.php?t=7940
Also, I start compiz using 'compiz --replace ccp'
I used the NVIDIA-Linux-x86-169.09-pkg1.run as the driver of my graphic card, it seems it's working ok by running "glxgears", with output:
15638 frames in 5.0 seconds = 3127.518 FPS
.................................
It's working fine now after I installed the extra packages(full package from a different source), but I can launch it only by "compiz --replace". The other launching ways like 'compiz --replace ccp', 'compiz --replace gconf & gtk-window-decorator&'
|
|
Re: compiz on debian, no window borders shown
On Thu, May 15, 2008 at 11:25 PM, Todd A. Jacobs < nospam@...> wrote:
On Thu, May 15, 2008 at 05:11:06PM -0400, Michael Yang wrote:
> I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but
> after I executed "compiz --replace", the following messages are
> returned:
IMHO, the compiz packages have a missing dependency on the compiz-fusion
packages. Without compiz-fusion plugins, compiz isn't decorating the
windows properly or breaking window management in some other way.
In short, I had the same problem, installed compiz-fusion-plugins and
compiz-fusion-plugins-extra, and things seemed to work after that.
Thanks a lot, bro! I purged the original related packages on my system, and changed the source to: deb http://download.tuxfamily.org/shames/debian-sid/desktopfx/unstable/ ./
and installed the full packages (compiz*, compiz-fusion*, fusion-icon, emerald), and now it's working fine. There are still two problems on auto-startup. 1). I followed some guides I found out on internet, and changed the following two files:
/etc/xdg/xfce4-session/xfce4-session.rc, /usr/share/desktop-base/profiles/xdg-config/xfce4-session/xfce4-session.rc I changed Client0_Command=xfwm4 to Client0_Command=compiz (or compiz --replace)
but nothing happended after I entered xfce4. For now I have to use "compiz --replace" as the auto-started application for xfce4 Is there any ways to launch 'compiz' upon startup, instead of starting xfwm first and 'compiz --replace' it?
2) "emerald --replace" can only be started up successfully after "compiz --replace"
I thought I can only start "emerald --replace" without executing "compiz --replace", is it correct? Now when I want to use emerald, the error message indicating (emerald:6034): Wnck-WARNING **: Property _NET_WM_NAME contained invalid UTF-8
Can I start emerald as I do for compiz?? Thanks a lot. M.Y.
--
"Oh, look: rocks!"
-- Doctor Who, "Destiny of the Daleks"
--
To UNSUBSCRIBE, email to debian-user-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...
|
|
Re: compiz on debian, no window borders shown
On Fri, May 16, 2008 at 12:18 PM, Michael Yang < michael.yxf@...> wrote:
On Thu, May 15, 2008 at 11:25 PM, Todd A. Jacobs < nospam@...> wrote:
On Thu, May 15, 2008 at 05:11:06PM -0400, Michael Yang wrote:
> I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but
> after I executed "compiz --replace", the following messages are
> returned:
IMHO, the compiz packages have a missing dependency on the compiz-fusion
packages. Without compiz-fusion plugins, compiz isn't decorating the
windows properly or breaking window management in some other way.
In short, I had the same problem, installed compiz-fusion-plugins and
compiz-fusion-plugins-extra, and things seemed to work after that.
Thanks a lot, bro! I purged the original related packages on my system, and changed the source to: deb http://download.tuxfamily.org/shames/debian-sid/desktopfx/unstable/ ./
and installed the full packages (compiz*, compiz-fusion*, fusion-icon, emerald), and now it's working fine. There are still two problems on auto-startup. 1). I followed some guides I found out on internet, and changed the following two files:
/etc/xdg/xfce4-session/xfce4-session.rc, /usr/share/desktop-base/profiles/xdg-config/xfce4-session/xfce4-session.rc I changed Client0_Command=xfwm4 to Client0_Command=compiz (or compiz --replace)
but nothing happended after I entered xfce4. For now I have to use "compiz --replace" as the auto-started application for xfce4 Is there any ways to launch 'compiz' upon startup, instead of starting xfwm first and 'compiz --replace' it?
Now I'm back to normal without starting 'compiz --replace' upon startup, the default window manager is xfwm4 (I changed back to it), but it seems that same problems happened as with compiz. No window border shown, and I have to use "xfwm4 --replace" to back to normal.
Any one has idea about how this happen?
Thanks a lot.
M.Y.
2) "emerald --replace" can only be started up successfully after "compiz --replace"
I thought I can only start "emerald --replace" without executing "compiz --replace", is it correct?
Now when I want to use emerald, the error message indicating
(emerald:6034): Wnck-WARNING **: Property _NET_WM_NAME contained invalid UTF-8
Can I start emerald as I do for compiz??
Thanks a lot.
M.Y.
--
|
|
Re: compiz on debian, no window borders shown
On Fri, May 16, 2008 at 4:08 PM, Michael Yang < michael.yxf@...> wrote:
On Thu, May 15, 2008 at 11:25 PM, Todd A. Jacobs < nospam@...> wrote:
On Thu, May 15, 2008 at 05:11:06PM -0400, Michael Yang wrote:
> I installed the compiz on my debian (lenny/sid, 2.6.24, xfce4), but
> after I executed "compiz --replace", the following messages are
> returned:
IMHO, the compiz packages have a missing dependency on the compiz-fusion
packages. Without compiz-fusion plugins, compiz isn't decorating the
windows properly or breaking window management in some other way.
In short, I had the same problem, installed compiz-fusion-plugins and
compiz-fusion-plugins-extra, and things seemed to work after that.
Thanks a lot, bro! I purged the original related packages on my system, and changed the source to: deb http://download.tuxfamily.org/shames/debian-sid/desktopfx/unstable/ ./
and installed the full packages (compiz*, compiz-fusion*, fusion-icon, emerald), and now it's working fine. There are still two problems on auto-startup. 1). I followed some guides I found out on internet, and changed the following two files:
/etc/xdg/xfce4-session/xfce4-session.rc, /usr/share/desktop-base/profiles/xdg-config/xfce4-session/xfce4-session.rc I changed Client0_Command=xfwm4 to Client0_Command=compiz (or compiz --replace)
but nothing happended after I entered xfce4. For now I have to use "compiz --replace" as the auto-started application for xfce4 Is there any ways to launch 'compiz' upon startup, instead of starting xfwm first and 'compiz --replace' it?
Now I'm back to normal without starting 'compiz --replace' upon startup, the default window manager is xfwm4 (I changed back to it), but it seems that same problems happened as with compiz. No window border shown, and I have to use "xfwm4 --replace" to back to normal.
Any one has idea about how this happen?
I think I found it. I deleted the ~/.cache and restart X, everything is ok.
Is this place saving the history session?
2) "emerald --replace" can only be started up successfully after "compiz --replace"
I thought I can only start "emerald --replace" without executing "compiz --replace", is it correct?
Now when I want to use emerald, the error message indicating
(emerald:6034): Wnck-WARNING **: Property _NET_WM_NAME contained invalid UTF-8
Can I start emerald as I do for compiz??
Thanks a lot.
M.Y.
--
|
