Will farcry 5.0 work on cfmx 7?

[raZorTT]

I've just done an install locally on CF8 to be told that the
production server that i'm likely going to deploy to only has CF7. I
was hoping to get a quick answer here before doing another setup to
find out.

I couldn't see any thing on the wiki or the farcrycms.org website.

Cheers,

Simon
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "farcry-dev" group.
To post to this group, send email to farcry-dev@...
To unsubscribe from this group, send email to farcry-dev-unsubscribe@...
For more options, visit this group at http://groups.google.com/group/farcry-dev?hl=en
-~----------~----~----~----~------~----~------~--~---

[Matthew Williams-4]

I think if you're at 7.0.2 you should be OK.  I think starting at 4.0,
this was required over a straight 7 install.

Matthew Williams
Geodesic GraFX

raZorTT wrote:

> I've just done an install locally on CF8 to be told that the
> production server that i'm likely going to deploy to only has CF7. I
> was hoping to get a quick answer here before doing another setup to
> find out.
>
> I couldn't see any thing on the wiki or the farcrycms.org website.
>
> Cheers,
>
> Simon
> >
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.138 / Virus Database: 270.4.10/1552 - Release Date: 7/14/2008 6:28 PM
>
>
>
>  

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "farcry-dev" group.
To post to this group, send email to farcry-dev@...
To unsubscribe from this group, send email to farcry-dev-unsubscribe@...
For more options, visit this group at http://groups.google.com/group/farcry-dev?hl=en
-~----------~----~----~----~------~----~------~--~---

[raZorTT]

Thanks Matthew,

I was getting worried I was going to have to drop back to 4.0. So far
i'm loving 5.0 well done to all involved!

Cheers,

Simon

On Jul 15, 9:48 pm, Matthew Williams <webmas...@...>
wrote:

> I think if you're at 7.0.2 you should be OK.  I think starting at 4.0,
> this was required over a straight 7 install.
>
> Matthew Williams
> Geodesic GraFX
>
>
>
> raZorTT wrote:
> > I've just done an install locally on CF8 to be told that the
> > production server that i'm likely going to deploy to only has CF7. I
> > was hoping to get a quick answer here before doing another setup to
> > find out.
>
> > I couldn't see any thing on the wiki or the farcrycms.org website.
>
> > Cheers,
>
> > Simon
>
> > No virus found in this incoming message.
> > Checked by AVG -http://www.avg.com
> > Version: 8.0.138 / Virus Database: 270.4.10/1552 - Release Date: 7/14/2008 6:28 PM- Hide quoted text -
>
> - Show quoted text -

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "farcry-dev" group.
To post to this group, send email to farcry-dev@...
To unsubscribe from this group, send email to farcry-dev-unsubscribe@...
For more options, visit this group at http://groups.google.com/group/farcry-dev?hl=en
-~----------~----~----~----~------~----~------~--~---

[modius]

On Jul 16, 10:59 am, raZorTT <sjanss...@...> wrote:
> I was getting worried I was going to have to drop back to 4.0. So far
> i'm loving 5.0 well done to all involved!
>
> On Jul 15, 9:48 pm, Matthew Williams <webmas...@...>
> wrote:
> > I think if you're at 7.0.2 you should be OK.  I think starting at 4.0,
> > this was required over a straight 7 install.

4.0 and 5.0 only require 7.02.  (And even then the .02 is only
required for the Flex UI bits)

We also support OpenBD and are almost there with Railo support.

-- geoff
http://www.daemon.com.au/
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "farcry-dev" group.
To post to this group, send email to farcry-dev@...
To unsubscribe from this group, send email to farcry-dev-unsubscribe@...
For more options, visit this group at http://groups.google.com/group/farcry-dev?hl=en
-~----------~----~----~----~------~----~------~--~---

[Matthew Williams-4]

Did flight check change?  Last I knew, it would stall out if you weren't at 7.02?

Matthew Williams
Geodesic GraFX

modius wrote:

On Jul 16, 10:59 am, raZorTT sjanss...@... wrote:
  

I was getting worried I was going to have to drop back to 4.0. So far
i'm loving 5.0 well done to all involved!

On Jul 15, 9:48 pm, Matthew Williams webmas...@...
wrote:
    

I think if you're at 7.0.2 you should be OK.  I think starting at 4.0,
this was required over a straight 7 install.
      

4.0 and 5.0 only require 7.02.  (And even then the .02 is only
required for the Flex UI bits)

We also support OpenBD and are almost there with Railo support.

-- geoff
http://www.daemon.com.au/


No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.138 / Virus Database: 270.4.11/1554 - Release Date: 7/15/2008 6:03 PM



  

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "farcry-dev" group.
To post to this group, send email to farcry-dev@...
To unsubscribe from this group, send email to farcry-dev-unsubscribe@...
For more options, visit this group at http://groups.google.com/group/farcry-dev?hl=en
-~----------~----~----~----~------~----~------~--~---

[raZorTT]

Thanks Geoff!

Cheers,

Simon

On Jul 16, 11:08 am, modius <mod...@...> wrote:

> On Jul 16, 10:59 am, raZorTT <sjanss...@...> wrote:
>
> > I was getting worried I was going to have to drop back to 4.0. So far
> > i'm loving 5.0 well done to all involved!
>
> > On Jul 15, 9:48 pm, Matthew Williams <webmas...@...>
> > wrote:
> > > I think if you're at 7.0.2 you should be OK.  I think starting at 4.0,
> > > this was required over a straight 7 install.
>
> 4.0 and 5.0 only require 7.02.  (And even then the .02 is only
> required for the Flex UI bits)
>
> We also support OpenBD and are almost there with Railo support.
>
> -- geoffhttp://www.daemon.com.au/

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "farcry-dev" group.
To post to this group, send email to farcry-dev@...
To unsubscribe from this group, send email to farcry-dev-unsubscribe@...
For more options, visit this group at http://groups.google.com/group/farcry-dev?hl=en
-~----------~----~----~----~------~----~------~--~---