|
»
»
»
»
»
Upgrade to 2.0 Question
|
View:
New views
8 Messages
—
Rating Filter:
Alert me
|
 |
Upgrade to 2.0 Question
by George McLean
::
Rate this Message:
Hello,
I have successfully upgraded a windows server 2003 system following the migration instructions. In attempting to upgrade an XP SP2 system I made a mistake and did not uninstall V1.2 before installing v2.0. I realized my mistake and uninstalled v1.2 and then v2.0. I then re-installed v2.0 but have not had much success. The Mapguide service will not start in a reboot of the system. I see errors in the error log indicating the repository version is incorrect (V5 instead of V6). I have tried running the UpgradeRepositories.bat but get errors upgrading the Site repository and Library repository stating the "Program version 4.5 doesn't match environment version ....". I have tried this with my 1.2 repositories and also with the repositories that are installed right from v2.0. I am guessing I have some registry setting or some environment variable that was not cleared out by the removal of v1.2 but I have not found anything. Any suggestions on how to clean this up and just install 2.o from scratch? I have my repositories from 1.2 backed up elsewhere. Thanks George McLean _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users |
|
|
RE: Upgrade to 2.0 Question
by Andy Morsell
::
Rate this Message:
I've personally found that the easiest way to upgrade is to first export a
package of your ENTIRE 1.2 repository and then load that package into your 2.0 site. You may want to re-install 1.2 somewhere, export your repository, then re-install 2.0 so that it's initially working and then load the package. Andy Morsell, P.E. Spatial Integrators, Inc. www.SpatialGIS.com -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of George McLean Sent: Thursday, July 17, 2008 9:20 AM To: MapGuide Users Mail List Subject: [mapguide-users] Upgrade to 2.0 Question Hello, I have successfully upgraded a windows server 2003 system following the migration instructions. In attempting to upgrade an XP SP2 system I made a mistake and did not uninstall V1.2 before installing v2.0. I realized my mistake and uninstalled v1.2 and then v2.0. I then re-installed v2.0 but have not had much success. The Mapguide service will not start in a reboot of the system. I see errors in the error log indicating the repository version is incorrect (V5 instead of V6). I have tried running the UpgradeRepositories.bat but get errors upgrading the Site repository and Library repository stating the "Program version 4.5 doesn't match environment version ....". I have tried this with my 1.2 repositories and also with the repositories that are installed right from v2.0. I am guessing I have some registry setting or some environment variable that was not cleared out by the removal of v1.2 but I have not found anything. Any suggestions on how to clean this up and just install 2.o from scratch? I have my repositories from 1.2 backed up elsewhere. Thanks George McLean _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users |
|
|
RE: Upgrade to 2.0 Question
by Warren Medernach
::
Rate this Message:
I've also been told (sorry, can't remember where or who) that if you
load a package from a previous release you should also run the UpgradeRepositories.bat & SetupRepositoryIndices.bat batch files located in the ..\Server\RepositoryAdmin folder. Can somebody verify that this is a required step? Warren M -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Andy Morsell Sent: Thursday, July 17, 2008 10:35 AM To: 'MapGuide Users Mail List' Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've personally found that the easiest way to upgrade is to first export a package of your ENTIRE 1.2 repository and then load that package into your 2.0 site. You may want to re-install 1.2 somewhere, export your repository, then re-install 2.0 so that it's initially working and then load the package. Andy Morsell, P.E. Spatial Integrators, Inc. www.SpatialGIS.com -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of George McLean Sent: Thursday, July 17, 2008 9:20 AM To: MapGuide Users Mail List Subject: [mapguide-users] Upgrade to 2.0 Question Hello, I have successfully upgraded a windows server 2003 system following the migration instructions. In attempting to upgrade an XP SP2 system I made a mistake and did not uninstall V1.2 before installing v2.0. I realized my mistake and uninstalled v1.2 and then v2.0. I then re-installed v2.0 but have not had much success. The Mapguide service will not start in a reboot of the system. I see errors in the error log indicating the repository version is incorrect (V5 instead of V6). I have tried running the UpgradeRepositories.bat but get errors upgrading the Site repository and Library repository stating the "Program version 4.5 doesn't match environment version ....". I have tried this with my 1.2 repositories and also with the repositories that are installed right from v2.0. I am guessing I have some registry setting or some environment variable that was not cleared out by the removal of v1.2 but I have not found anything. Any suggestions on how to clean this up and just install 2.o from scratch? I have my repositories from 1.2 backed up elsewhere. Thanks George McLean _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users |
|
|
RE: Upgrade to 2.0 Question
by Steve Dang
::
Rate this Message:
If your repositories were originally/freshly created by MG Server 2.0, then you do not need to run the UpgradeRepositories.bat and SetupRepositoryIndices.bat files at all.
However, there is no harm if you run these batch files anyway. These files are only required to be run during the upgrade (http://trac.osgeo.org/mapguide/wiki/1.2to2.0MigrationInstructions). Steve. -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Warren Medermach (External) Sent: Thursday, July 17, 2008 10:42 AM To: MapGuide Users Mail List Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've also been told (sorry, can't remember where or who) that if you load a package from a previous release you should also run the UpgradeRepositories.bat & SetupRepositoryIndices.bat batch files located in the ..\Server\RepositoryAdmin folder. Can somebody verify that this is a required step? Warren M -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Andy Morsell Sent: Thursday, July 17, 2008 10:35 AM To: 'MapGuide Users Mail List' Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've personally found that the easiest way to upgrade is to first export a package of your ENTIRE 1.2 repository and then load that package into your 2.0 site. You may want to re-install 1.2 somewhere, export your repository, then re-install 2.0 so that it's initially working and then load the package. Andy Morsell, P.E. Spatial Integrators, Inc. www.SpatialGIS.com -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of George McLean Sent: Thursday, July 17, 2008 9:20 AM To: MapGuide Users Mail List Subject: [mapguide-users] Upgrade to 2.0 Question Hello, I have successfully upgraded a windows server 2003 system following the migration instructions. In attempting to upgrade an XP SP2 system I made a mistake and did not uninstall V1.2 before installing v2.0. I realized my mistake and uninstalled v1.2 and then v2.0. I then re-installed v2.0 but have not had much success. The Mapguide service will not start in a reboot of the system. I see errors in the error log indicating the repository version is incorrect (V5 instead of V6). I have tried running the UpgradeRepositories.bat but get errors upgrading the Site repository and Library repository stating the "Program version 4.5 doesn't match environment version ....". I have tried this with my 1.2 repositories and also with the repositories that are installed right from v2.0. I am guessing I have some registry setting or some environment variable that was not cleared out by the removal of v1.2 but I have not found anything. Any suggestions on how to clean this up and just install 2.o from scratch? I have my repositories from 1.2 backed up elsewhere. Thanks George McLean _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users |
|
|
RE: Upgrade to 2.0 Question
by Andy Morsell
::
Rate this Message:
That is confusing then. I've upgraded several sites by exporting /
importing the packages without running any batch files and everything works fine. My assumption was that the package import process on the 2.0 server handled everything and converted it properly. I would also be interested in a confirmation about the proper way to upgrade. Andy -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Warren Medernach Sent: Thursday, July 17, 2008 9:42 AM To: MapGuide Users Mail List Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've also been told (sorry, can't remember where or who) that if you load a package from a previous release you should also run the UpgradeRepositories.bat & SetupRepositoryIndices.bat batch files located in the ..\Server\RepositoryAdmin folder. Can somebody verify that this is a required step? Warren M -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Andy Morsell Sent: Thursday, July 17, 2008 10:35 AM To: 'MapGuide Users Mail List' Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've personally found that the easiest way to upgrade is to first export a package of your ENTIRE 1.2 repository and then load that package into your 2.0 site. You may want to re-install 1.2 somewhere, export your repository, then re-install 2.0 so that it's initially working and then load the package. Andy Morsell, P.E. Spatial Integrators, Inc. www.SpatialGIS.com -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of George McLean Sent: Thursday, July 17, 2008 9:20 AM To: MapGuide Users Mail List Subject: [mapguide-users] Upgrade to 2.0 Question Hello, I have successfully upgraded a windows server 2003 system following the migration instructions. In attempting to upgrade an XP SP2 system I made a mistake and did not uninstall V1.2 before installing v2.0. I realized my mistake and uninstalled v1.2 and then v2.0. I then re-installed v2.0 but have not had much success. The Mapguide service will not start in a reboot of the system. I see errors in the error log indicating the repository version is incorrect (V5 instead of V6). I have tried running the UpgradeRepositories.bat but get errors upgrading the Site repository and Library repository stating the "Program version 4.5 doesn't match environment version ....". I have tried this with my 1.2 repositories and also with the repositories that are installed right from v2.0. I am guessing I have some registry setting or some environment variable that was not cleared out by the removal of v1.2 but I have not found anything. Any suggestions on how to clean this up and just install 2.o from scratch? I have my repositories from 1.2 backed up elsewhere. Thanks George McLean _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users |
|
|
RE: Upgrade to 2.0 Question
by Martin Morrison
::
Rate this Message:
I didn't when I upgraded my sites. I think the only time it is required
is when you upgrade in place. Martin -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Andy Morsell Sent: Thursday, July 17, 2008 2:21 PM To: 'MapGuide Users Mail List' Subject: RE: [mapguide-users] Upgrade to 2.0 Question That is confusing then. I've upgraded several sites by exporting / importing the packages without running any batch files and everything works fine. My assumption was that the package import process on the 2.0 server handled everything and converted it properly. I would also be interested in a confirmation about the proper way to upgrade. Andy -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Warren Medernach Sent: Thursday, July 17, 2008 9:42 AM To: MapGuide Users Mail List Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've also been told (sorry, can't remember where or who) that if you load a package from a previous release you should also run the UpgradeRepositories.bat & SetupRepositoryIndices.bat batch files located in the ..\Server\RepositoryAdmin folder. Can somebody verify that this is a required step? Warren M -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Andy Morsell Sent: Thursday, July 17, 2008 10:35 AM To: 'MapGuide Users Mail List' Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've personally found that the easiest way to upgrade is to first export a package of your ENTIRE 1.2 repository and then load that package into your 2.0 site. You may want to re-install 1.2 somewhere, export your repository, then re-install 2.0 so that it's initially working and then load the package. Andy Morsell, P.E. Spatial Integrators, Inc. www.SpatialGIS.com -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of George McLean Sent: Thursday, July 17, 2008 9:20 AM To: MapGuide Users Mail List Subject: [mapguide-users] Upgrade to 2.0 Question Hello, I have successfully upgraded a windows server 2003 system following the migration instructions. In attempting to upgrade an XP SP2 system I made a mistake and did not uninstall V1.2 before installing v2.0. I realized my mistake and uninstalled v1.2 and then v2.0. I then re-installed v2.0 but have not had much success. The Mapguide service will not start in a reboot of the system. I see errors in the error log indicating the repository version is incorrect (V5 instead of V6). I have tried running the UpgradeRepositories.bat but get errors upgrading the Site repository and Library repository stating the "Program version 4.5 doesn't match environment version ....". I have tried this with my 1.2 repositories and also with the repositories that are installed right from v2.0. I am guessing I have some registry setting or some environment variable that was not cleared out by the removal of v1.2 but I have not found anything. Any suggestions on how to clean this up and just install 2.o from scratch? I have my repositories from 1.2 backed up elsewhere. Thanks George McLean _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users |
|
|
RE: Upgrade to 2.0 Question
by Dave Wilson-3
::
Rate this Message:
The upgrade modifies the indexes and the database, not the data per se so an import of the package to an empty Repository doesn't modify the data as far as I know and doesn't require the upgrade scripts to be run.
Dave -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Martin Morrison Sent: Thursday, July 17, 2008 12:27 PM To: MapGuide Users Mail List Subject: RE: [mapguide-users] Upgrade to 2.0 Question I didn't when I upgraded my sites. I think the only time it is required is when you upgrade in place. Martin -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Andy Morsell Sent: Thursday, July 17, 2008 2:21 PM To: 'MapGuide Users Mail List' Subject: RE: [mapguide-users] Upgrade to 2.0 Question That is confusing then. I've upgraded several sites by exporting / importing the packages without running any batch files and everything works fine. My assumption was that the package import process on the 2.0 server handled everything and converted it properly. I would also be interested in a confirmation about the proper way to upgrade. Andy -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Warren Medernach Sent: Thursday, July 17, 2008 9:42 AM To: MapGuide Users Mail List Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've also been told (sorry, can't remember where or who) that if you load a package from a previous release you should also run the UpgradeRepositories.bat & SetupRepositoryIndices.bat batch files located in the ..\Server\RepositoryAdmin folder. Can somebody verify that this is a required step? Warren M -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Andy Morsell Sent: Thursday, July 17, 2008 10:35 AM To: 'MapGuide Users Mail List' Subject: RE: [mapguide-users] Upgrade to 2.0 Question I've personally found that the easiest way to upgrade is to first export a package of your ENTIRE 1.2 repository and then load that package into your 2.0 site. You may want to re-install 1.2 somewhere, export your repository, then re-install 2.0 so that it's initially working and then load the package. Andy Morsell, P.E. Spatial Integrators, Inc. www.SpatialGIS.com -----Original Message----- From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of George McLean Sent: Thursday, July 17, 2008 9:20 AM To: MapGuide Users Mail List Subject: [mapguide-users] Upgrade to 2.0 Question Hello, I have successfully upgraded a windows server 2003 system following the migration instructions. In attempting to upgrade an XP SP2 system I made a mistake and did not uninstall V1.2 before installing v2.0. I realized my mistake and uninstalled v1.2 and then v2.0. I then re-installed v2.0 but have not had much success. The Mapguide service will not start in a reboot of the system. I see errors in the error log indicating the repository version is incorrect (V5 instead of V6). I have tried running the UpgradeRepositories.bat but get errors upgrading the Site repository and Library repository stating the "Program version 4.5 doesn't match environment version ....". I have tried this with my 1.2 repositories and also with the repositories that are installed right from v2.0. I am guessing I have some registry setting or some environment variable that was not cleared out by the removal of v1.2 but I have not found anything. Any suggestions on how to clean this up and just install 2.o from scratch? I have my repositories from 1.2 backed up elsewhere. Thanks George McLean _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users |
|
|
Re: Upgrade to 2.0 Question
by George McLean
::
Rate this Message:
I tried Andy's suggestion and it appears to have worked well.
Thanks! George Dave Wilson wrote: > The upgrade modifies the indexes and the database, not the data per se so an import of the package to an empty Repository doesn't modify the data as far as I know and doesn't require the upgrade scripts to be run. > > Dave > > -----Original Message----- > From: mapguide-users-bounces@... [mailto:mapguide-users-bounces@...] On Behalf Of Martin Morrison > Sent: Thursday, July 17, 2008 12:27 PM > To: MapGuide Users Mail List > Subject: RE: [mapguide-users] Upgrade to 2.0 Question > > I didn't when I upgraded my sites. I think the only time it is required > is when you upgrade in place. > > Martin > > > > -----Original Message----- > From: mapguide-users-bounces@... > [mailto:mapguide-users-bounces@...] On Behalf Of Andy > Morsell > Sent: Thursday, July 17, 2008 2:21 PM > To: 'MapGuide Users Mail List' > Subject: RE: [mapguide-users] Upgrade to 2.0 Question > > That is confusing then. I've upgraded several sites by exporting / > importing the packages without running any batch files and everything > works > fine. My assumption was that the package import process on the 2.0 > server > handled everything and converted it properly. I would also be > interested in > a confirmation about the proper way to upgrade. > > Andy > > > -----Original Message----- > From: mapguide-users-bounces@... > [mailto:mapguide-users-bounces@...] On Behalf Of Warren > Medernach > Sent: Thursday, July 17, 2008 9:42 AM > To: MapGuide Users Mail List > Subject: RE: [mapguide-users] Upgrade to 2.0 Question > > I've also been told (sorry, can't remember where or who) that if you > load a package from a previous release you should also run the > UpgradeRepositories.bat & SetupRepositoryIndices.bat batch files located > in the ..\Server\RepositoryAdmin folder. > > Can somebody verify that this is a required step? > > Warren M > > > -----Original Message----- > From: mapguide-users-bounces@... > [mailto:mapguide-users-bounces@...] On Behalf Of Andy > Morsell > Sent: Thursday, July 17, 2008 10:35 AM > To: 'MapGuide Users Mail List' > Subject: RE: [mapguide-users] Upgrade to 2.0 Question > > I've personally found that the easiest way to upgrade is to first export > a > package of your ENTIRE 1.2 repository and then load that package into > your > 2.0 site. You may want to re-install 1.2 somewhere, export your > repository, > then re-install 2.0 so that it's initially working and then load the > package. > > > Andy Morsell, P.E. > Spatial Integrators, Inc. > www.SpatialGIS.com > > -----Original Message----- > From: mapguide-users-bounces@... > [mailto:mapguide-users-bounces@...] On Behalf Of George > McLean > Sent: Thursday, July 17, 2008 9:20 AM > To: MapGuide Users Mail List > Subject: [mapguide-users] Upgrade to 2.0 Question > > Hello, > > I have successfully upgraded a windows server 2003 system following the > migration instructions. > > In attempting to upgrade an XP SP2 system I made a mistake and did not > uninstall V1.2 before installing v2.0. I realized my mistake and > uninstalled v1.2 and then v2.0. I then re-installed v2.0 but have not > had much success. > > The Mapguide service will not start in a reboot of the system. I see > errors in the error log indicating the repository version is incorrect > (V5 instead of V6). I have tried running the UpgradeRepositories.bat but > > get errors upgrading the Site repository and Library repository stating > the "Program version 4.5 doesn't match environment version ....". I have > > tried this with my 1.2 repositories and also with the repositories that > are installed right from v2.0. > > I am guessing I have some registry setting or some environment variable > that was not cleared out by the removal of v1.2 but I have not found > anything. > > Any suggestions on how to clean this up and just install 2.o from > scratch? I have my repositories from 1.2 backed up elsewhere. > > Thanks > > George McLean > _______________________________________________ > mapguide-users mailing list > mapguide-users@... > http://lists.osgeo.org/mailman/listinfo/mapguide-users > > > _______________________________________________ > mapguide-users mailing list > mapguide-users@... > http://lists.osgeo.org/mailman/listinfo/mapguide-users > _______________________________________________ > mapguide-users mailing list > mapguide-users@... > http://lists.osgeo.org/mailman/listinfo/mapguide-users > > > _______________________________________________ > mapguide-users mailing list > mapguide-users@... > http://lists.osgeo.org/mailman/listinfo/mapguide-users > > _______________________________________________ > mapguide-users mailing list > mapguide-users@... > http://lists.osgeo.org/mailman/listinfo/mapguide-users > _______________________________________________ > mapguide-users mailing list > mapguide-users@... > http://lists.osgeo.org/mailman/listinfo/mapguide-users > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.138 / Virus Database: 270.5.0/1558 - Release Date: 7/17/2008 9:56 AM > > > > _______________________________________________ mapguide-users mailing list mapguide-users@... http://lists.osgeo.org/mailman/listinfo/mapguide-users |
| Free Forum Powered by Nabble | Forum Help |