Thermaltake VC4001SNS Medialab remote

View: New views

2 Messages — Rating Filter: Alert me

Thermaltake VC4001SNS Medialab remote

by Jelle De Loecker :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi,

I just received my Thermaltake Mozart VC4001SNS case (with the MediaLab remote) but I'm running into a few problems:
I'm running Mythbuntu 8.04.1

With the "devinput" driver in my hardware.conf file I do get feedback from my remote, but all the buttons have the same code! Am I missing something, am I using the wrong driver?

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="MediaLAB"
REMOTE_MODULES="lirc_dev"
REMOTE_DRIVER="devinput"
REMOTE_DEVICE="/dev/usb/hiddev0"
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"
REMOTE_LIRCD_ARGS=""

##########

# lircd.conf
begin remote

name MediaLAB
bits           32
eps            30
aeps          100

one             0     0
zero            0     0
gap          195998
toggle_bit_mask 0x0

      begin codes
          Play                     0x8004FFCD
          Stop                     0x8004FFCD
          Shutdown                 0x8004FFCD
          Quit                     0x8004FFCD
      end codes

end remote

--

Met vriendelijke groeten,

Jelle De Loecker
Kipdola Studios - Tomberg

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

Re: Thermaltake VC4001SNS Medialab remote

by Jelle De Loecker :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Apparantly, I'm running the infamous "0036" device.

Bus 001 Device 003: ID 15c2:0036 SoundGraph Inc.

Which has 2 separate devices for the pad and the regular buttons.

Met vriendelijke groeten,

Jelle De Loecker
Kipdola Studios - Tomberg

Jelle De Loecker schreef:

Hi,

I just received my Thermaltake Mozart VC4001SNS case (with the MediaLab remote) but I'm running into a few problems:
I'm running Mythbuntu 8.04.1

With the "devinput" driver in my hardware.conf file I do get feedback from my remote, but all the buttons have the same code! Am I missing something, am I using the wrong driver?

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="MediaLAB"
REMOTE_MODULES="lirc_dev"
REMOTE_DRIVER="devinput"
REMOTE_DEVICE="/dev/usb/hiddev0"
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"
REMOTE_LIRCD_ARGS=""

##########

# lircd.conf
begin remote

name MediaLAB
bits           32
eps            30
aeps          100

one             0     0
zero            0     0
gap          195998
toggle_bit_mask 0x0

      begin codes
          Play                     0x8004FFCD
          Stop                     0x8004FFCD
          Shutdown                 0x8004FFCD
          Quit                     0x8004FFCD
      end codes

end remote

--

Met vriendelijke groeten,

Jelle De Loecker
Kipdola Studios - Tomberg
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

LightInTheBox - Buy quality products at wholesale price!