Nabble - The openwince project

tag:www.nabble.com,2006:forum-3550 Nabble - The openwince project 2008-11-25T11:00:43Z The openwince project collects free (open source) software tools, modules, applications, drivers, and so on for Windows CE platform developers. Some of the modules are usable outside Windows CE development environment and are platform independent. The openwince project home is <a href="http://sourceforge.net/projects/openwince/" target="_top" rel="nofollow">here</a>. tag:www.nabble.com,2006:post-20688529 Re: JTAG via GPIO? 2008-11-25T11:00:43Z 2008-11-25T11:00:43Z Waschk,Kolja > I don't see a driver for this in the openwince software. Does anyone know <br>> of code for this? <br><br>There are cable drivers in UrJTAG (<a href="http://www.urjtag.org" target="_top" rel="nofollow">http://www.urjtag.org</a>) that use GPIO, <br>e.g. the visio_ep9307 cable driver (src/tap/cable/visio_ep9307).c via <br>/dev/mem <br><br>Kolja<br />------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br />_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=20688529&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-20686250 JTAG via GPIO? 2008-11-25T09:44:32Z 2008-11-25T09:44:32Z Lew Glendenning-2 <br>I assume it is possible to drive JTAG lines via GPIO pins, but am new at this.<br><br>I don't see a driver for this in the openwince software.  Does anyone know of code for this?<br><br>Thanks.<br><br>Lew<br> <br />------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br />_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=20686250&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-19329611 Re: JTAG Programmer and Analog Device's Blackfin MCU 2008-09-05T04:52:07Z 2008-09-05T04:52:07Z Matthew Barousse <div dir="ltr">Thanks alot everyone!<br><br><div class="gmail_quote">On Fri, Sep 5, 2008 at 3:05 AM, Andrew Seddon <span dir="ltr"><<a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19329611&i=0" target="_top" rel="nofollow">andrew.seddon@...</a>></span> wrote:<br> <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> <div link="blue" vlink="blue" lang="EN-US"> <div> <p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;"><a href="http://www.section5.ch/" target="_blank" rel="nofollow">http://www.section5.ch/</a></span></font></p> <p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;"> </span></font></p> <div> <div style="text-align: center;" align="center"><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> <hr size="2" width="100%" align="center"> </span></font></div> <p><b><font size="2" face="Tahoma"><span style="font-size: 10pt; font-family: Tahoma; font-weight: bold;">From:</span></font></b><font size="2" face="Tahoma"><span style="font-size: 10pt; font-family: Tahoma;"> <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19329611&i=1" target="_top" rel="nofollow">openwince-list-bounces@...</a> [mailto:<a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19329611&i=2" target="_top" rel="nofollow">openwince-list-bounces@...</a>] <b><span style="font-weight: bold;">On Behalf Of </span></b>Matthew Barousse<br> <b><span style="font-weight: bold;">Sent:</span></b> 04 September 2008 20:13<br> <b><span style="font-weight: bold;">To:</span></b> <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19329611&i=3" target="_top" rel="nofollow">openwince-list@...</a><br> <b><span style="font-weight: bold;">Subject:</span></b> [openwince-list] JTAG Programmer and Analog Device's Blackfin MCU</span></font></p> </div><div><div></div><div class="Wj3C7c"> <p><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p> <div> <p><font size="3" face="Times New Roman"><span style="font-size: 12pt;">Hey everyone. <br> I'm having a hard time finding information, so I'm just asking around on a few lists. I really hope someone can get me pointed in the right direction, or lend some information.<br> <br> I'm working on a team at the University of Louisiana at Lafayette building a small satellite. My project is the communications subsystem, which will be an SDR powered by a Blackfin MCU.<br> <br> We're at the development stage, and are having a hard time finding a cheap, compatible JTAG programmer, and a means to flash our soon-to-be development board. We want to run native code on the MCU.<br> <br> <br> Does anyone have experience programing these, or know of a compatible JTAG programmer that will run with JTAG tools.. or any other slightly cheap alternative?<br> The device we are using is the ADSP-BF537 and we have the STAMP development board, running uC linux. We would like to develop our own kernel, though, and can't seem to find a cheap way to flash it. For now we can use Das U-Boot on the development board, but when we switch to our own board, we're going to run into a brick wall.<br> <br> I'd like to steer clear of the $3,000+ programmers/software, but if they are the only option we have, we'll just have to go with one of those.<br> <br> Any information anyone has would be amazing.<br> Thanks for your time.<br> <br> Matthew Barousse<br> <a href="http://ulcape.org/" target="_blank" rel="nofollow">http://ulcape.org/</a></span></font></p> </div> <p><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p> </div></div><div style="text-align: center;" align="center"><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> <hr size="2" width="100%" align="center"> </span></font></div> <p><font size="3" face="Times New Roman"><span style="font-size: 12pt;">This email has been scanned by Netintelligence<br> <a href="http://www.netintelligence.com/email" target="_blank" rel="nofollow">http://www.netintelligence.com/email</a></span></font></p> <div style="text-align: center;" align="center"><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> <hr size="2" width="100%" align="center"> </span></font></div> </div> </div> <br>-------------------------------------------------------------------------<br> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge<br> Build the coolest Linux based applications with Moblin SDK & win great prizes<br> Grand prize is a trip for two to an Open Source event anywhere in the world<br> <a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_blank" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br>_______________________________________________<br> openwince-list mailing list<br> <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19329611&i=4" target="_top" rel="nofollow">openwince-list@...</a><br> <a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_blank" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br> <br></blockquote></div><br></div> <br />------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br />_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19329611&i=5" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-19326755 Re: JTAG Programmer and Analog Device's Blackfin MCU 2008-09-05T01:05:36Z 2008-09-05T01:05:36Z Andrew Seddon <html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:st1="urn:schemas-microsoft-com:office:smarttags" xmlns="http://www.w3.org/TR/REC-html40"> <head> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"> <meta name=Generator content="Microsoft Word 11 (filtered medium)"> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="PlaceName" /> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="PlaceType" /> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="City" /> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="place" />  </head> <body lang=EN-US link=blue vlink=blue> <div class=Section1> <p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size: 10.0pt;font-family:Arial;color:navy'>http://www.section5.ch/<o:p></o:p></span></font></p> <p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size: 10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p> <div> <div class=MsoNormal align=center style='text-align:center'><font size=3 face="Times New Roman"><span style='font-size:12.0pt'> <hr size=2 width="100%" align=center tabindex=-1> </span></font></div> <p class=MsoNormal><b><font size=2 face=Tahoma><span style='font-size:10.0pt; font-family:Tahoma;font-weight:bold'>From:</span></font></b><font size=2 face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'> <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19326755&i=0" target="_top" rel="nofollow">openwince-list-bounces@...</a> [mailto:<a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19326755&i=1" target="_top" rel="nofollow">openwince-list-bounces@...</a>] <b><span style='font-weight:bold'>On Behalf Of </span></b>Matthew Barousse<br> <b><span style='font-weight:bold'>Sent:</span></b> 04 September 2008 20:13<br> <b><span style='font-weight:bold'>To:</span></b> <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19326755&i=2" target="_top" rel="nofollow">openwince-list@...</a><br> <b><span style='font-weight:bold'>Subject:</span></b> [openwince-list] JTAG Programmer and Analog Device's Blackfin MCU</span></font><o:p></o:p></p> </div> <p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size: 12.0pt'><o:p> </o:p></span></font></p> <div> <p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size: 12.0pt'>Hey everyone. <br> I'm having a hard time finding information, so I'm just asking around on a few lists. I really hope someone can get me pointed in the right direction, or lend some information.<br> <br> I'm working on a team at the <st1:PlaceType w:st="on">University</st1:PlaceType> of <st1:PlaceName w:st="on">Louisiana</st1:PlaceName> at <st1:City w:st="on"><st1:place w:st="on">Lafayette</st1:place></st1:City> building a small satellite. My project is the communications subsystem, which will be an SDR powered by a Blackfin MCU.<br> <br> We're at the development stage, and are having a hard time finding a cheap, compatible JTAG programmer, and a means to flash our soon-to-be development board. We want to run native code on the MCU.<br> <br> <br> Does anyone have experience programing these, or know of a compatible JTAG programmer that will run with JTAG tools.. or any other slightly cheap alternative?<br> The device we are using is the ADSP-BF537 and we have the STAMP development board, running uC linux. We would like to develop our own kernel, though, and can't seem to find a cheap way to flash it. For now we can use Das U-Boot on the development board, but when we switch to our own board, we're going to run into a brick wall.<br> <br> I'd like to steer clear of the $3,000+ programmers/software, but if they are the only option we have, we'll just have to go with one of those.<br> <br> Any information anyone has would be amazing.<br> Thanks for your time.<br> <br> Matthew Barousse<br> <a href="http://ulcape.org/" target="_top" rel="nofollow">http://ulcape.org/</a><o:p></o:p></span></font></p> </div> <p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size: 12.0pt'><o:p> </o:p></span></font></p> <div class=MsoNormal align=center style='text-align:center'><font size=3 face="Times New Roman"><span style='font-size:12.0pt'> <hr size=2 width="100%" align=center> </span></font></div> <p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size: 12.0pt'>This email has been scanned by Netintelligence<br> <a href="http://www.netintelligence.com/email" target="_top" rel="nofollow">http://www.netintelligence.com/email</a><o:p></o:p></span></font></p> <div class=MsoNormal align=center style='text-align:center'><font size=3 face="Times New Roman"><span style='font-size:12.0pt'> <hr size=2 width="100%" align=center> </span></font></div> </div> </body> </html> <br />------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br />_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19326755&i=3" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-19325069 AUTO: Werner Haase ist außer Haus (Rückkehr am 12.09.2008) 2008-09-04T22:18:37Z 2008-09-04T22:18:37Z whaase <br>Ich bin bis 12.09.2008 abwesend <br><br><br><br><br>Hinweis: Dies ist eine automatische Antwort auf Ihre Nachricht  " <br>[openwince-list] JTAG Programmer and Analog Device's Blackfin MCU" gesendet <br>am 9/4/08 21:12:31]. <br><br>Diese ist die einzige Benachrichtigung, die Sie empfangen werden, während <br>diese Person abwesend ist. <br><br>Please visit us at IBC2008 in Amsterdam, booth # 8.E86 <br>See the RTW “Loudness Family” <br> – Perfect on air with perfect production! <br>____________________________________________________________ <br>RTW GmbH & Co. KG <br>Elbeallee 19 <br>50765 Köln - Germany <br>Tel. +49 221 70913-0 <br>Fax. +49 221 70913-32 <br><a href="http://www.rtw.de" target="_top" rel="nofollow">http://www.rtw.de</a>  <br>Registergericht Köln HRA 13609 <br>UST-ID: DE 811961166 <br>Persönlich haftende Gesellschafterin: <br>RTW RADIO-TECHNISCHE WERKSTAETTEN Verwaltungs-GmbH, Sitz Köln <br>Registergericht Köln HRB 26981 <br>Geschäftsführer: Andreas Tweitmann <br>------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19325069&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-19318590 Re: JTAG Programmer and Analog Device's Blackfin MCU 2008-09-04T12:46:45Z 2008-09-04T12:46:45Z Waschk,Kolja Hi, <br><br>> an SDR powered by a Blackfin MCU. <br>> We're at the development stage, and are having a hard time finding a cheap, <br>> compatible JTAG programmer, and a means to flash our soon-to-be development <br><br>Any adapter that is supported by UrJTAG, a further developed version of the <br>openwince JTAG tools, can be used to program flash at a Blackfin DSP and <br>AFAIK even for debugging. For example, most if not all FT2232-based <br>adapters are supported, which usually consist of no more than a FTDI <br>FT2232 (<a href="http://www.ftdichip.com" target="_top" rel="nofollow">http://www.ftdichip.com</a>) and maybe level shifters to adapt to <br>the target voltage. If you search the net for FT2232 and JTAG you will <br>find a number of ready-made adapters to buy. <br><br>For more info about UrJTAG, see <a href="http://www.urjtag.org" target="_top" rel="nofollow">http://www.urjtag.org</a> or even better, <br>because Blackfin-specific, see the documentation about using UrJTAG at <br><a href="http://docs.blackfin.uclinux.org/doku.php?id=flashing_the_board" target="_top" rel="nofollow">http://docs.blackfin.uclinux.org/doku.php?id=flashing_the_board</a><br><br>In fact, the jtag tools that come with the blackfin toolchain are almost <br>the same as UrJTAG. I'm not up-to-date about the current differences, <br>but assume there are only a few. <br><br>I have already been using UrJTAG and a JTAGkey from Amontec successfully <br>to revive a BF537-STAMP board (where I killed the bootloader accidentally) <br><br>Kolja <br><br><br><br>------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19318590&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-19317948 JTAG Programmer and Analog Device's Blackfin MCU 2008-09-04T12:12:31Z 2008-09-04T12:12:31Z Matthew Barousse <div dir="ltr">Hey everyone. <br>I'm having a hard time finding information, so I'm just asking around on a few lists. I really hope someone can get me pointed in the right direction, or lend some information.<br><br> I'm working on a team at the University of Louisiana at Lafayette building a small satellite. My project is the communications subsystem, which will be an SDR powered by a Blackfin MCU.<br><br>We're at the development stage, and are having a hard time finding a cheap, compatible JTAG programmer, and a means to flash our soon-to-be development board. We want to run native code on the MCU.<br> <br><br>Does anyone have experience programing these, or know of a compatible JTAG programmer that will run with JTAG tools.. or any other slightly cheap alternative?<br>The device we are using is the ADSP-BF537 and we have the STAMP development board, running uC linux. We would like to develop our own kernel, though, and can't seem to find a cheap way to flash it. For now we can use Das U-Boot on the development board, but when we switch to our own board, we're going to run into a brick wall.<br> <br>I'd like to steer clear of the $3,000+ programmers/software, but if they are the only option we have, we'll just have to go with one of those.<br><br>Any information anyone has would be amazing.<br>Thanks for your time.<br> <br>Matthew Barousse<br><a href="http://ulcape.org/" target="_top" rel="nofollow">http://ulcape.org/</a><br></div> <br />------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br />_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=19317948&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-18974932 Jtag CVS now looks to be broken as well 2008-08-13T19:49:26Z 2008-08-13T19:49:26Z Gregg Levine Hello! <br>This can't be a coincidence. The JTAG CVS pull made today, looks to be <br>broken in much the same areas as the numbered release. Reference here <br>for that purpose: <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>cmd.o -MD -MP -MF ".deps/cmd.Tpo" -c -o cmd.o `test -f 'cmd/cmd.c' || <br>echo './'`cmd/cmd.c; \ <br>        then mv -f ".deps/cmd.Tpo" ".deps/cmd.Po"; else rm -f <br>".deps/cmd.Tpo"; exit 1; fi <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>help.o -MD -MP -MF ".deps/help.Tpo" -c -o help.o `test -f 'cmd/help.c' <br>|| echo './'`cmd/help.c; \ <br>        then mv -f ".deps/help.Tpo" ".deps/help.Po"; else rm -f <br>".deps/help.Tpo"; exit 1; fi <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>quit.o -MD -MP -MF ".deps/quit.Tpo" -c -o quit.o `test -f 'cmd/quit.c' <br>|| echo './'`cmd/quit.c; \ <br>        then mv -f ".deps/quit.Tpo" ".deps/quit.Po"; else rm -f <br>".deps/quit.Tpo"; exit 1; fi <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>cmd_detectflash.o -MD -MP -MF ".deps/cmd_detectflash.Tpo" -c -o <br>cmd_detectflash.o `test -f 'cmd/cmd_detectflash.c' || echo <br>'./'`cmd/cmd_detectflash.c; \ <br>        then mv -f ".deps/cmd_detectflash.Tpo" <br>".deps/cmd_detectflash.Po"; else rm -f ".deps/cmd_detectflash.Tpo"; <br>exit 1; fi <br>cmd/cmd_detectflash.c: In function `cmd_detectflash_run': <br>cmd/cmd_detectflash.c:48: error: too many arguments to function `detectflash' <br>make[4]: *** [cmd_detectflash.o] Error 1 <br>make[4]: Leaving directory `/usr/local/jtag/jtag/libbrux' <br>make[3]: *** [all-recursive] Error 1 <br>make[3]: Leaving directory `/usr/local/jtag/jtag/libbrux' <br>make[2]: *** [all] Error 2 <br>make[2]: Leaving directory `/usr/local/jtag/jtag/libbrux' <br>make[1]: *** [all-recursive] Error 1 <br>make[1]: Leaving directory `/usr/local/jtag/jtag' <br>make: *** [all] Error 2 <br><br>As you can see it explodes in the cmd directory which is also part of <br>the same library that supplies the flash ones. However it does appear <br>to compile properly on the numbered release. <br><br>----- <br>Gregg C Levine <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=18974932&i=0" target="_top" rel="nofollow">gregg.drwho8@...</a> <br>"This signature was once found posting rude <br> messages in English in the Moscow subway." <br><br>------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=18974932&i=1" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-18974835 JTAG errors --these after installing a file or two from CVS 2008-08-13T19:36:03Z 2008-08-13T19:36:03Z Gregg Levine Hello! <br>Please examine these errors during building the numbered release 5.1 <br>while using a Slackware-11.0 system: <br>make[4]: Entering directory `/usr/local/jtag/jtag-0.5.1/libbrux' <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>cmd.o -MD -MP -MF ".deps/cmd.Tpo" \ <br>          -c -o cmd.o `test -f 'cmd/cmd.c' || echo './'`cmd/cmd.c; \ <br>        then mv -f ".deps/cmd.Tpo" ".deps/cmd.Po"; \ <br>        else rm -f ".deps/cmd.Tpo"; exit 1; \ <br>        fi <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>help.o -MD -MP -MF ".deps/help.Tpo" \ <br>          -c -o help.o `test -f 'cmd/help.c' || echo './'`cmd/help.c; \ <br>        then mv -f ".deps/help.Tpo" ".deps/help.Po"; \ <br>        else rm -f ".deps/help.Tpo"; exit 1; \ <br>        fi <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>quit.o -MD -MP -MF ".deps/quit.Tpo" \ <br>          -c -o quit.o `test -f 'cmd/quit.c' || echo './'`cmd/quit.c; \ <br>        then mv -f ".deps/quit.Tpo" ".deps/quit.Po"; \ <br>        else rm -f ".deps/quit.Tpo"; exit 1; \ <br>        fi <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>cmd_detectflash.o -MD -MP -MF ".deps/cmd_detectflash.Tpo" \ <br>          -c -o cmd_detectflash.o `test -f 'cmd/cmd_detectflash.c' || <br>echo './'`cmd/cmd_detectflash.c; \ <br>        then mv -f ".deps/cmd_detectflash.Tpo" ".deps/cmd_detectflash.Po"; \ <br>        else rm -f ".deps/cmd_detectflash.Tpo"; exit 1; \ <br>        fi <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince <br>-I/usr/local/include/openwince/device <br>-I/usr/local/include/openwince/arm -I./../include  -g -O2 -Wall -MT <br>cfi.o -MD -MP -MF ".deps/cfi.Tpo" \ <br>          -c -o cfi.o `test -f 'flash/cfi.c' || echo './'`flash/cfi.c; \ <br>        then mv -f ".deps/cfi.Tpo" ".deps/cfi.Po"; \ <br>        else rm -f ".deps/cfi.Tpo"; exit 1; \ <br>        fi <br>flash/cfi.c: In function `cfi_detect': <br>flash/cfi.c:69: error: `bus_area_t' undeclared (first use in this function) <br>flash/cfi.c:69: error: (Each undeclared identifier is reported only once <br>flash/cfi.c:69: error: for each function it appears in.) <br>flash/cfi.c:69: error: syntax error before "area" <br>flash/cfi.c:80: warning: implicit declaration of function `bus_area' <br>flash/cfi.c:80: error: `area' undeclared (first use in this function) <br>make[4]: *** [cfi.o] Error 1 <br>make[4]: Leaving directory `/usr/local/jtag/jtag-0.5.1/libbrux' <br>make[3]: *** [all-recursive] Error 1 <br>make[3]: Leaving directory `/usr/local/jtag/jtag-0.5.1/libbrux' <br>make[2]: *** [all] Error 2 <br>make[2]: Leaving directory `/usr/local/jtag/jtag-0.5.1/libbrux' <br>make[1]: *** [all-recursive] Error 1 <br>make[1]: Leaving directory `/usr/local/jtag/jtag-0.5.1' <br>make: *** [all] Error 2 <br><br>Ideally I'm supposed to replace the one created by extracting the <br>files from the bzip2ed compressed file from Source Forge, with the one <br>from CVS. And continue from there. However that happened after doing <br>that. This didn't happen the first time. <br><br>Ideally that is. That first time was when the OS was first installed <br>on that box. This is the second go-round. I needed to reinstall <br>everything the other day after a catastrophic failure in the OS <br>surfaced. <br><br>Any suggestions? Also are there any fellow users of Slackware on this list? <br>----- <br>Gregg C Levine <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=18974835&i=0" target="_top" rel="nofollow">gregg.drwho8@...</a> <br>"This signature was once found posting rude <br> messages in English in the Moscow subway." <br><br>------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=18974835&i=1" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-18785311 [PATCH 2/3] add soekris net45xx watchdog support 2008-08-01T19:01:41Z 2008-08-01T19:01:41Z ulf kypke add kernel module sc520 watchdog in others <br><br /><tt>[add_sc520wdt_module.patch]</tt><br /><hr align="left" width="300" /><tt>diff -urN trunk/package/kernel/modules/other.mk trunk_working/package/kernel/modules/other.mk <br>--- trunk/package/kernel/modules/other.mk 2008-08-02 03:31:43.000000000 +0200 <br>+++ trunk_working/package/kernel/modules/other.mk 2008-08-02 03:28:30.000000000 +0200 <br>@@ -480,6 +480,22 @@ <br> $(eval $(call KernelPackage,scx200-wdt)) <br>  <br>  <br>+define KernelPackage/sc520-wdt <br>+  SUBMENU:=$(OTHER_MENU) <br>+  TITLE:=Natsemi SC520 Watchdog support <br>+  DEPENDS:=@TARGET_x86 <br>+  KCONFIG:=CONFIG_SC520_WDT <br>+  FILES:=$(LINUX_DIR)/drivers/char/watchdog/sc520_wdt.$(LINUX_KMOD_SUFFIX) <br>+  AUTOLOAD:=$(call AutoLoad,50,sc520_wdt) <br>+endef <br>+ <br>+define KernelPackage/sc520-wdt/description <br>+ Kernel module for SC520 Watchdog <br>+endef <br>+ <br>+$(eval $(call KernelPackage,sc520-wdt)) <br>+ <br>+ <br> define KernelPackage/input-core <br>   SUBMENU:=$(OTHER_MENU) <br>   TITLE:=Input device core <br></tt><hr align="left" width="300" /><br />------------------------------------------------------------------------- <br>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge <br>Build the coolest Linux based applications with Moblin SDK & win great prizes <br>Grand prize is a trip for two to an Open Source event anywhere in the world <br><a href="http://moblin-contest.org/redirect.php?banner_id=100&url=/" target="_top" rel="nofollow">http://moblin-contest.org/redirect.php?banner_id=100&url=/</a><br />_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=18785311&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14935056 Re: JTAG Tools 2008-01-17T13:50:58Z 2008-01-17T13:50:58Z Marcel Telka Hi. <br><br>Please try UrJTAG <<a href="http://urjtag.sourceforge.net/" target="_top" rel="nofollow">http://urjtag.sourceforge.net/</a>>. <br>It is direct successor of openwince JTAG Tools. <br><br>HTH. <br><br>On Wed, Jan 16, 2008 at 12:29:31PM -0500, <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14935056&i=0" target="_top" rel="nofollow">gideon425.gb4@...</a> wrote: <div class='shrinkable-quote'><br>> I see from the page <br>> <a href="http://openwince.sourceforge.net/jtag/" target="_top" rel="nofollow">http://openwince.sourceforge.net/jtag/</a><br>> <br>> that Yosemite PPC 440EP board is apparently not supported by <br>> JTAG Tools. <br>> <br>> I would like to be able to program the flash part of <br>> this board. Is this likely to be possible with some <br>> simple changes to JTAG Tools? Or would much research <br>> be needed? <br>> <br>> Please send replies to <br>> <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14935056&i=1" target="_top" rel="nofollow">timothy.bedding.2@...</a> <br>> <br>> <br>> ---------- <br>> This message was sent from a MailNull anti-spam account.  You can get <br>> your free account and take control over your email by visiting the <br>> following URL. <br>> <br>>    <a href="http://mailnull.com/" target="_top" rel="nofollow">http://mailnull.com/</a><br>> <br>> ------------------------------------------------------------------------- <br>> This SF.net email is sponsored by: Microsoft <br>> Defy all challenges. Microsoft(R) Visual Studio 2008. <br>> <a href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/" target="_top" rel="nofollow">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a><br>> _______________________________________________ <br>> openwince-list mailing list <br>> <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14935056&i=2" target="_top" rel="nofollow">openwince-list@...</a> <br>> <a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a></div><br>-- <br>+-------------------------------------------+ <br>| Marcel Telka   e-mail:   <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14935056&i=3" target="_top" rel="nofollow">marcel@...</a>  | <br>|                homepage: <a href="http://telka.sk/" target="_top" rel="nofollow">http://telka.sk/</a> | <br>|                jabber:   <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14935056&i=4" target="_top" rel="nofollow">marcel@...</a> | <br>+-------------------------------------------+ <br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Microsoft <br>Defy all challenges. Microsoft(R) Visual Studio 2008. <br><a href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/" target="_top" rel="nofollow">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14935056&i=5" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14934449 JTAG Tools 2008-01-16T09:29:31Z 2008-01-16T09:29:31Z gideon425.gb4 I see from the page <br><a href="http://openwince.sourceforge.net/jtag/" target="_top" rel="nofollow">http://openwince.sourceforge.net/jtag/</a><br><br>that Yosemite PPC 440EP board is apparently not supported by <br>JTAG Tools. <br><br>I would like to be able to program the flash part of <br>this board. Is this likely to be possible with some <br>simple changes to JTAG Tools? Or would much research <br>be needed? <br><br>Please send replies to <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14934449&i=0" target="_top" rel="nofollow">timothy.bedding.2@...</a> <br><br><br>---------- <br>This message was sent from a MailNull anti-spam account.  You can get <br>your free account and take control over your email by visiting the <br>following URL. <br><br>   <a href="http://mailnull.com/" target="_top" rel="nofollow">http://mailnull.com/</a><br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Microsoft <br>Defy all challenges. Microsoft(R) Visual Studio 2008. <br><a href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/" target="_top" rel="nofollow">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14934449&i=1" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14770465 [ openwince-Support Requests-1866586 ] jtag-0.5.1 make errors 2008-01-11T22:45:29Z 2008-01-11T22:45:29Z SourceForge.net Support Requests item #1866586, was opened at 2008-01-08 03:03 <br>Message generated for change (Comment added) made by masteryoda <br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>Please note that this message will contain a full copy of the comment thread, <br>including the initial issue submission, for this request, <br>not just the latest update. <br>Category: openwince <br>Group: None <br>Status: Open <br>Priority: 9 <br>Private: No <br>Submitted By: Zhenghao (talltk) <br>Assigned to: Marcel Telka (telka) <br>Summary: jtag-0.5.1 make errors <br><br>Initial Comment: <br>Hi everyone, I am desperate for help!!   <br><br>I am using the latest version of UBUNTU.  I recently downloaded a copy of jtag-0.5.1 and include-0.4.2 from the sourceforge.net website.   <br><br>I tried ./configure, make and make install for include and everything worked out fine.  Then I moved on to the jtag-0.5.1.   <br><br>./configure worked without errors.  However, when I tried to make or make install (prior to this I did a sudo make so it's not due to insufficient rights) I got this error: <br><br>make[4]: Leaving directory `/tmp/jtag/libbrux/po' <br>make[4]: Entering directory `/tmp/jtag/libbrux' <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince -I/usr/local <br>/include/openwince/device -I/usr/local/include/openwince/arm -I./../include  -g <br>-O2 -Wall -MT cmd_detectflash.o -MD -MP -MF ".deps/cmd_detectflash.Tpo" \ <br>          -c -o cmd_detectflash.o `test -f 'cmd/cmd_detectflash.c' || echo './'` <br>cmd/cmd_detectflash.c; \ <br>        then mv -f ".deps/cmd_detectflash.Tpo" ".deps/cmd_detectflash.Po"; \ <br>        else rm -f ".deps/cmd_detectflash.Tpo"; exit 1; \ <br>        fi <br>cmd/cmd_detectflash.c: In function `cmd_detectflash_run': <br>cmd/cmd_detectflash.c:43: error: too few arguments to function `detectflash' <br>make[4]: *** [cmd_detectflash.o] Error 1 <br>make[4]: Leaving directory `/tmp/jtag/libbrux' <br>make[3]: *** [all-recursive] Error 1 <br>make[3]: Leaving directory `/tmp/jtag/libbrux' <br>make[2]: *** [all] Error 2 <br>make[2]: Leaving directory `/tmp/jtag/libbrux' <br>make[1]: *** [all-recursive] Error 1 <br>make[1]: Leaving directory `/tmp/jtag' <br>make: *** [all] Error 2 <br><br>What's going on?  What did I do wrong? <br><br>I kept the two directories (jtag-0.5.1 and include-0.4.2) separate.  Am I supposed to replace the include folder in jtag-0.5.1 with the include-0.4.2? <br><br>Another question:  When I "./configure" in the jtag-0.5.1 folder, am supposed to type "./configure --with-include=PATH", where PATH is the path of include-0.4.2?  I tried this out but still I experience the same problem on top. <br><br>Please help!  My professor is shouting at me! <br><br>---------------------------------------------------------------------- <br><br>Comment By: Gregg C Levine (masteryoda) <br>Date: 2008-01-12 01:45 <br><br>Message: <br>Logged In: YES <br>user_id=79839 <br>Originator: NO <br><br>Hello! <br>Our host is telling you that it was indeed fixed in the one inside CVS. <br>Instructions for retrieving it are found on the tab for code and then <br>select CVS. Select as module the jtag one. You can either use it, or copy <br>over the relevant files into the directory where you see the complaint. <br><br>The idea is to do the retrieval into a new and empty directory. <br><br>---------------------------------------------------------------------- <br><br>Comment By: Zhenghao (talltk) <br>Date: 2008-01-12 01:03 <br><br>Message: <br>Logged In: YES <br>user_id=1974104 <br>Originator: YES <br><br>Hi, thanks for the help.  As mentioned in 4th line of my original posting, <br>I did "./configure && make && make install" in the include-0.4.2 directory <br>first, and it worked out fine.  The only problem comes when i do the same <br>for the jtag-0.5.1.   <br><br>Do you know how to fix the CVS?  I am absolutely clueless about CVS. <br><br>---------------------------------------------------------------------- <br><br>Comment By: Kolja Waschk (kawk) <br>Date: 2008-01-11 14:59 <br><br>Message: <br>Logged In: YES <br>user_id=478715 <br>Originator: NO <br><br>Hi, you're supposed to do a "./configure && make && make install" in the <br>include-0.4.2 directory first. <br><br>The problem you're reporting with detectflash might be fixed in the CVS <br>version of jtag (or include). <br><br>OT: As a compatible alternative, you could try UrJTAG (<a href="http://urjtag.org" target="_top" rel="nofollow">http://urjtag.org</a>) <br><br><br>---------------------------------------------------------------------- <br><br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>------------------------------------------------------------------------- <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace" target="_top" rel="nofollow">http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14770465&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14770281 [ openwince-Support Requests-1866586 ] jtag-0.5.1 make errors 2008-01-11T22:03:32Z 2008-01-11T22:03:32Z SourceForge.net Support Requests item #1866586, was opened at 2008-01-08 16:03 <br>Message generated for change (Comment added) made by talltk <br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>Please note that this message will contain a full copy of the comment thread, <br>including the initial issue submission, for this request, <br>not just the latest update. <br>Category: openwince <br>Group: None <br>Status: Open <br>Priority: 9 <br>Private: No <br>Submitted By: Zhenghao (talltk) <br>Assigned to: Marcel Telka (telka) <br>Summary: jtag-0.5.1 make errors <br><br>Initial Comment: <br>Hi everyone, I am desperate for help!!   <br><br>I am using the latest version of UBUNTU.  I recently downloaded a copy of jtag-0.5.1 and include-0.4.2 from the sourceforge.net website.   <br><br>I tried ./configure, make and make install for include and everything worked out fine.  Then I moved on to the jtag-0.5.1.   <br><br>./configure worked without errors.  However, when I tried to make or make install (prior to this I did a sudo make so it's not due to insufficient rights) I got this error: <br><br>make[4]: Leaving directory `/tmp/jtag/libbrux/po' <br>make[4]: Entering directory `/tmp/jtag/libbrux' <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince -I/usr/local <br>/include/openwince/device -I/usr/local/include/openwince/arm -I./../include  -g <br>-O2 -Wall -MT cmd_detectflash.o -MD -MP -MF ".deps/cmd_detectflash.Tpo" \ <br>          -c -o cmd_detectflash.o `test -f 'cmd/cmd_detectflash.c' || echo './'` <br>cmd/cmd_detectflash.c; \ <br>        then mv -f ".deps/cmd_detectflash.Tpo" ".deps/cmd_detectflash.Po"; \ <br>        else rm -f ".deps/cmd_detectflash.Tpo"; exit 1; \ <br>        fi <br>cmd/cmd_detectflash.c: In function `cmd_detectflash_run': <br>cmd/cmd_detectflash.c:43: error: too few arguments to function `detectflash' <br>make[4]: *** [cmd_detectflash.o] Error 1 <br>make[4]: Leaving directory `/tmp/jtag/libbrux' <br>make[3]: *** [all-recursive] Error 1 <br>make[3]: Leaving directory `/tmp/jtag/libbrux' <br>make[2]: *** [all] Error 2 <br>make[2]: Leaving directory `/tmp/jtag/libbrux' <br>make[1]: *** [all-recursive] Error 1 <br>make[1]: Leaving directory `/tmp/jtag' <br>make: *** [all] Error 2 <br><br>What's going on?  What did I do wrong? <br><br>I kept the two directories (jtag-0.5.1 and include-0.4.2) separate.  Am I supposed to replace the include folder in jtag-0.5.1 with the include-0.4.2? <br><br>Another question:  When I "./configure" in the jtag-0.5.1 folder, am supposed to type "./configure --with-include=PATH", where PATH is the path of include-0.4.2?  I tried this out but still I experience the same problem on top. <br><br>Please help!  My professor is shouting at me! <br><br>---------------------------------------------------------------------- <br><br>>Comment By: Zhenghao (talltk) <br>Date: 2008-01-12 14:03 <br><br>Message: <br>Logged In: YES <br>user_id=1974104 <br>Originator: YES <br><br>Hi, thanks for the help.  As mentioned in 4th line of my original posting, <br>I did "./configure && make && make install" in the include-0.4.2 directory <br>first, and it worked out fine.  The only problem comes when i do the same <br>for the jtag-0.5.1.   <br><br>Do you know how to fix the CVS?  I am absolutely clueless about CVS. <br><br>---------------------------------------------------------------------- <br><br>Comment By: Kolja Waschk (kawk) <br>Date: 2008-01-12 03:59 <br><br>Message: <br>Logged In: YES <br>user_id=478715 <br>Originator: NO <br><br>Hi, you're supposed to do a "./configure && make && make install" in the <br>include-0.4.2 directory first. <br><br>The problem you're reporting with detectflash might be fixed in the CVS <br>version of jtag (or include). <br><br>OT: As a compatible alternative, you could try UrJTAG (<a href="http://urjtag.org" target="_top" rel="nofollow">http://urjtag.org</a>) <br><br><br>---------------------------------------------------------------------- <br><br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>------------------------------------------------------------------------- <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace" target="_top" rel="nofollow">http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14770281&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14764181 [ openwince-Support Requests-1866586 ] jtag-0.5.1 make errors 2008-01-11T11:59:04Z 2008-01-11T11:59:04Z SourceForge.net Support Requests item #1866586, was opened at 2008-01-08 09:03 <br>Message generated for change (Comment added) made by kawk <br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>Please note that this message will contain a full copy of the comment thread, <br>including the initial issue submission, for this request, <br>not just the latest update. <br>Category: openwince <br>Group: None <br>Status: Open <br>Priority: 9 <br>Private: No <br>Submitted By: Zhenghao (talltk) <br>Assigned to: Marcel Telka (telka) <br>Summary: jtag-0.5.1 make errors <br><br>Initial Comment: <br>Hi everyone, I am desperate for help!!   <br><br>I am using the latest version of UBUNTU.  I recently downloaded a copy of jtag-0.5.1 and include-0.4.2 from the sourceforge.net website.   <br><br>I tried ./configure, make and make install for include and everything worked out fine.  Then I moved on to the jtag-0.5.1.   <br><br>./configure worked without errors.  However, when I tried to make or make install (prior to this I did a sudo make so it's not due to insufficient rights) I got this error: <br><br>make[4]: Leaving directory `/tmp/jtag/libbrux/po' <br>make[4]: Entering directory `/tmp/jtag/libbrux' <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince -I/usr/local <br>/include/openwince/device -I/usr/local/include/openwince/arm -I./../include  -g <br>-O2 -Wall -MT cmd_detectflash.o -MD -MP -MF ".deps/cmd_detectflash.Tpo" \ <br>          -c -o cmd_detectflash.o `test -f 'cmd/cmd_detectflash.c' || echo './'` <br>cmd/cmd_detectflash.c; \ <br>        then mv -f ".deps/cmd_detectflash.Tpo" ".deps/cmd_detectflash.Po"; \ <br>        else rm -f ".deps/cmd_detectflash.Tpo"; exit 1; \ <br>        fi <br>cmd/cmd_detectflash.c: In function `cmd_detectflash_run': <br>cmd/cmd_detectflash.c:43: error: too few arguments to function `detectflash' <br>make[4]: *** [cmd_detectflash.o] Error 1 <br>make[4]: Leaving directory `/tmp/jtag/libbrux' <br>make[3]: *** [all-recursive] Error 1 <br>make[3]: Leaving directory `/tmp/jtag/libbrux' <br>make[2]: *** [all] Error 2 <br>make[2]: Leaving directory `/tmp/jtag/libbrux' <br>make[1]: *** [all-recursive] Error 1 <br>make[1]: Leaving directory `/tmp/jtag' <br>make: *** [all] Error 2 <br><br>What's going on?  What did I do wrong? <br><br>I kept the two directories (jtag-0.5.1 and include-0.4.2) separate.  Am I supposed to replace the include folder in jtag-0.5.1 with the include-0.4.2? <br><br>Another question:  When I "./configure" in the jtag-0.5.1 folder, am supposed to type "./configure --with-include=PATH", where PATH is the path of include-0.4.2?  I tried this out but still I experience the same problem on top. <br><br>Please help!  My professor is shouting at me! <br><br>---------------------------------------------------------------------- <br><br>Comment By: Kolja Waschk (kawk) <br>Date: 2008-01-11 20:59 <br><br>Message: <br>Logged In: YES <br>user_id=478715 <br>Originator: NO <br><br>Hi, you're supposed to do a "./configure && make && make install" in the <br>include-0.4.2 directory first. <br><br>The problem you're reporting with detectflash might be fixed in the CVS <br>version of jtag (or include). <br><br>OT: As a compatible alternative, you could try UrJTAG (<a href="http://urjtag.org" target="_top" rel="nofollow">http://urjtag.org</a>) <br><br><br>---------------------------------------------------------------------- <br><br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>------------------------------------------------------------------------- <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace" target="_top" rel="nofollow">http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14764181&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14749364 Re: [ openwince-Support Requests-1866586 ] jtag-0.5.1 make errors 2008-01-10T19:53:33Z 2008-01-10T19:53:33Z zhangjing.tju The problem comes from the version of the wince include file <br>The version 0.3.2 is just fine <br>Sorry for that I cannot access the link <a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>Maybe you have see that I am not a native English speaker, so Pardon me if I am not making it clear. <br><br>Good Luck!<p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14749328 Re: [ openwince-Support Requests-1825123 ] jtag-0.5.1 can not build 2008-01-10T19:49:26Z 2008-01-10T19:49:26Z zhangjing.tju Your should Have openwince include file install first <br>but not version 0.4.2, It is the 0.3.2<p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14684578 [ openwince-Support Requests-1866586 ] jtag-0.5.1 make errors 2008-01-08T00:04:05Z 2008-01-08T00:04:05Z SourceForge.net Support Requests item #1866586, was opened at 2008-01-08 16:03 <br>Message generated for change (Settings changed) made by talltk <br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>Please note that this message will contain a full copy of the comment thread, <br>including the initial issue submission, for this request, <br>not just the latest update. <br>Category: openwince <br>Group: None <br>Status: Open <br>>Priority: 9 <br>Private: No <br>Submitted By: Zhenghao (talltk) <br>Assigned to: Marcel Telka (telka) <br>Summary: jtag-0.5.1 make errors <br><br>Initial Comment: <br>Hi everyone, I am desperate for help!!   <br><br>I am using the latest version of UBUNTU.  I recently downloaded a copy of jtag-0.5.1 and include-0.4.2 from the sourceforge.net website.   <br><br>I tried ./configure, make and make install for include and everything worked out fine.  Then I moved on to the jtag-0.5.1.   <br><br>./configure worked without errors.  However, when I tried to make or make install (prior to this I did a sudo make so it's not due to insufficient rights) I got this error: <br><br>make[4]: Leaving directory `/tmp/jtag/libbrux/po' <br>make[4]: Entering directory `/tmp/jtag/libbrux' <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince -I/usr/local <br>/include/openwince/device -I/usr/local/include/openwince/arm -I./../include  -g <br>-O2 -Wall -MT cmd_detectflash.o -MD -MP -MF ".deps/cmd_detectflash.Tpo" \ <br>          -c -o cmd_detectflash.o `test -f 'cmd/cmd_detectflash.c' || echo './'` <br>cmd/cmd_detectflash.c; \ <br>        then mv -f ".deps/cmd_detectflash.Tpo" ".deps/cmd_detectflash.Po"; \ <br>        else rm -f ".deps/cmd_detectflash.Tpo"; exit 1; \ <br>        fi <br>cmd/cmd_detectflash.c: In function `cmd_detectflash_run': <br>cmd/cmd_detectflash.c:43: error: too few arguments to function `detectflash' <br>make[4]: *** [cmd_detectflash.o] Error 1 <br>make[4]: Leaving directory `/tmp/jtag/libbrux' <br>make[3]: *** [all-recursive] Error 1 <br>make[3]: Leaving directory `/tmp/jtag/libbrux' <br>make[2]: *** [all] Error 2 <br>make[2]: Leaving directory `/tmp/jtag/libbrux' <br>make[1]: *** [all-recursive] Error 1 <br>make[1]: Leaving directory `/tmp/jtag' <br>make: *** [all] Error 2 <br><br>What's going on?  What did I do wrong? <br><br>I kept the two directories (jtag-0.5.1 and include-0.4.2) separate.  Am I supposed to replace the include folder in jtag-0.5.1 with the include-0.4.2? <br><br>Another question:  When I "./configure" in the jtag-0.5.1 folder, am supposed to type "./configure --with-include=PATH", where PATH is the path of include-0.4.2?  I tried this out but still I experience the same problem on top. <br><br>Please help!  My professor is shouting at me! <br><br>---------------------------------------------------------------------- <br><br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>------------------------------------------------------------------------- <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace" target="_top" rel="nofollow">http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14684578&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14684563 [ openwince-Support Requests-1866586 ] jtag-0.5.1 make errors 2008-01-08T00:03:09Z 2008-01-08T00:03:09Z SourceForge.net Support Requests item #1866586, was opened at 2008-01-08 16:03 <br>Message generated for change (Tracker Item Submitted) made by Item Submitter <br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>Please note that this message will contain a full copy of the comment thread, <br>including the initial issue submission, for this request, <br>not just the latest update. <br>Category: openwince <br>Group: None <br>Status: Open <br>Priority: 5 <br>Private: No <br>Submitted By: Zhenghao (talltk) <br>Assigned to: Marcel Telka (telka) <br>Summary: jtag-0.5.1 make errors <br><br>Initial Comment: <br>Hi everyone, I am desperate for help!!   <br><br>I am using the latest version of UBUNTU.  I recently downloaded a copy of jtag-0.5.1 and include-0.4.2 from the sourceforge.net website.   <br><br>I tried ./configure, make and make install for include and everything worked out fine.  Then I moved on to the jtag-0.5.1.   <br><br>./configure worked without errors.  However, when I tried to make or make install (prior to this I did a sudo make so it's not due to insufficient rights) I got this error: <br><br>make[4]: Leaving directory `/tmp/jtag/libbrux/po' <br>make[4]: Entering directory `/tmp/jtag/libbrux' <br>if gcc -DHAVE_CONFIG_H -I. -I. -I.   -I/usr/local/include/openwince -I/usr/local <br>/include/openwince/device -I/usr/local/include/openwince/arm -I./../include  -g <br>-O2 -Wall -MT cmd_detectflash.o -MD -MP -MF ".deps/cmd_detectflash.Tpo" \ <br>          -c -o cmd_detectflash.o `test -f 'cmd/cmd_detectflash.c' || echo './'` <br>cmd/cmd_detectflash.c; \ <br>        then mv -f ".deps/cmd_detectflash.Tpo" ".deps/cmd_detectflash.Po"; \ <br>        else rm -f ".deps/cmd_detectflash.Tpo"; exit 1; \ <br>        fi <br>cmd/cmd_detectflash.c: In function `cmd_detectflash_run': <br>cmd/cmd_detectflash.c:43: error: too few arguments to function `detectflash' <br>make[4]: *** [cmd_detectflash.o] Error 1 <br>make[4]: Leaving directory `/tmp/jtag/libbrux' <br>make[3]: *** [all-recursive] Error 1 <br>make[3]: Leaving directory `/tmp/jtag/libbrux' <br>make[2]: *** [all] Error 2 <br>make[2]: Leaving directory `/tmp/jtag/libbrux' <br>make[1]: *** [all-recursive] Error 1 <br>make[1]: Leaving directory `/tmp/jtag' <br>make: *** [all] Error 2 <br><br>What's going on?  What did I do wrong? <br><br>I kept the two directories (jtag-0.5.1 and include-0.4.2) separate.  Am I supposed to replace the include folder in jtag-0.5.1 with the include-0.4.2? <br><br>Another question:  When I "./configure" in the jtag-0.5.1 folder, am supposed to type "./configure --with-include=PATH", where PATH is the path of include-0.4.2?  I tried this out but still I experience the same problem on top. <br><br>Please help!  My professor is shouting at me! <br><br>---------------------------------------------------------------------- <br><br>You can respond by visiting: <br><a href="https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603" target="_top" rel="nofollow">https://sourceforge.net/tracker/?func=detail&atid=469851&aid=1866586&group_id=52603</a><br><br>------------------------------------------------------------------------- <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace" target="_top" rel="nofollow">http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14684563&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14496789 FYI, UrJTAG 0.7 has been released 2007-12-25T10:48:34Z 2007-12-25T10:48:34Z Waschk,Kolja Hi, <br><br>FYI: UrJTAG 0.7 is now available (as a source tarball). It integrates <br>openwince JTAG Tools from CVS and numerous pending patches from <br>openwince patch tracker, plus some more. Details at <a href="http://urjtag.org" target="_top" rel="nofollow">http://urjtag.org</a><br>... <br><br>Kolja <br><br>-- <br>Mr. K.Waschk, Hamburg, Germany - <a href="http://www.ixo.de" target="_top" rel="nofollow">http://www.ixo.de</a><br><br><br><br><br><br><br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Microsoft <br>Defy all challenges. Microsoft(R) Visual Studio 2005. <br><a href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/" target="_top" rel="nofollow">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14496789&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14234336 Re: UrJTAG (Re: New project admin OpenWinCE) 2007-12-08T16:35:15Z 2007-12-08T16:35:15Z Ralf Engels Hi, <br><br>I agree. <br>What we are currently doing is more urjtag than openwince. <br>The name is the thing. <br><br>BR, <br>Ralf <br><br><br>On Sat, 2007-12-08 at 22:27 +0100, Waschk,Kolja wrote: <div class='shrinkable-quote'><br>> Hi Marcel, <br>> <br>> mt> What about returning back and merging back your great urjtag <br>> mt> effort to well known roots <<a href="http://openwince.sourceforge.net/jtag/" target="_top" rel="nofollow">http://openwince.sourceforge.net/jtag/</a>> ? <br>> [...] <br>> mt> Do not worry about rest of the openwince project. It is in hibernation now. <br>> <br>> Precisely this hibernation state of the rest indicates that "jtag" <br>> deserves to be developed as a project on its own, don't you think so? <br>> Well, that hasn't high priority, but now that UrJTAG already is set up, <br>> I suppose it's a good idea to keep it this way. <br>> <br>> Kolja <br>> <br>> <br>> ------------------------------------------------------------------------- <br>> SF.Net email is sponsored by: <br>> Check out the new SourceForge.net Marketplace. <br>> It's the best place to buy or sell services for <br>> just about anything Open Source. <br>> <a href="http://sourceforge.net/services/buy/index.php" target="_top" rel="nofollow">http://sourceforge.net/services/buy/index.php</a><br>> _______________________________________________ <br>> openwince-list mailing list <br>> <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14234336&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br>> <a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a></div><br><br>------------------------------------------------------------------------- <br>SF.Net email is sponsored by: <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://sourceforge.net/services/buy/index.php" target="_top" rel="nofollow">http://sourceforge.net/services/buy/index.php</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14234336&i=1" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14232900 Re: UrJTAG (Re: New project admin OpenWinCE) 2007-12-08T13:27:34Z 2007-12-08T13:27:34Z Waschk,Kolja Hi Marcel, <br><br>mt> What about returning back and merging back your great urjtag <br>mt> effort to well known roots <<a href="http://openwince.sourceforge.net/jtag/" target="_top" rel="nofollow">http://openwince.sourceforge.net/jtag/</a>> ? <br>[...] <br>mt> Do not worry about rest of the openwince project. It is in hibernation now. <br><br>Precisely this hibernation state of the rest indicates that "jtag" <br>deserves to be developed as a project on its own, don't you think so? <br>Well, that hasn't high priority, but now that UrJTAG already is set up, <br>I suppose it's a good idea to keep it this way. <br><br>Kolja <br><br><br>------------------------------------------------------------------------- <br>SF.Net email is sponsored by: <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://sourceforge.net/services/buy/index.php" target="_top" rel="nofollow">http://sourceforge.net/services/buy/index.php</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14232900&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14227947 Re: UrJTAG (Re: New project admin OpenWinCE) 2007-12-08T02:06:51Z 2007-12-08T02:06:51Z Marcel Telka Hi Kolja. <br><br>On Sat, Dec 08, 2007 at 10:31:35AM +0100, Waschk,Kolja wrote: <div class='shrinkable-quote'><br>> Hi, <br>> <br>> > integrating all the Xilinx parts. <br>> <br>> Did you check the UrJTAG fork lately? It has a number of additional <br>> Xilinx parts and most of the other pending patches for JTAG tools <br>> applied. The release of "0.6" is meant to happen in late December. <br>> <br>> > <a href="http://urjtag.sourceforge.net" target="_top" rel="nofollow">http://urjtag.sourceforge.net</a><br>> <br>> Now, it would be helpful if as many people as possible give it a try and <br>> report all problems and bugs (there probably are a number of them, after <br>> adding so many patches). <br>> <br>> It's actually based on the"jtag + libbrux + include" from openwince, and <br>> we still keep this partitioning - to ease merging the enhancements back <br>> in openwince, just in case. Another strategy for future development of <br>> openwince could be to keep the JTAG Tools "outsourced" in UrJTAG. </div><br>Ok. What about returning back and merging back your great urjtag effort to well <br>known roots <<a href="http://openwince.sourceforge.net/jtag/" target="_top" rel="nofollow">http://openwince.sourceforge.net/jtag/</a>> ? <br><br>I could give you all rights (CVS commit, etc) to the JTAG Tools and you could <br>become a maintainer of the JTAG Tools. <br><br>Do not worry about rest of the openwince project. It is in hibernation now. <br><br><br>What do you think about this offer? <br><br>-- <br>+-------------------------------------------+ <br>| Marcel Telka   e-mail:   <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14227947&i=0" target="_top" rel="nofollow">marcel@...</a>  | <br>|                homepage: <a href="http://telka.sk/" target="_top" rel="nofollow">http://telka.sk/</a> | <br>|                jabber:   <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14227947&i=1" target="_top" rel="nofollow">marcel@...</a> | <br>+-------------------------------------------+ <br><br>------------------------------------------------------------------------- <br>SF.Net email is sponsored by: <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://sourceforge.net/services/buy/index.php" target="_top" rel="nofollow">http://sourceforge.net/services/buy/index.php</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14227947&i=2" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14226865 UrJTAG (Re: New project admin OpenWinCE) 2007-12-08T01:31:35Z 2007-12-08T01:31:35Z Waschk,Kolja Hi, <br><br>> integrating all the Xilinx parts. <br><br>Did you check the UrJTAG fork lately? It has a number of additional <br>Xilinx parts and most of the other pending patches for JTAG tools <br>applied. The release of "0.6" is meant to happen in late December. <br><br>> <a href="http://urjtag.sourceforge.net" target="_top" rel="nofollow">http://urjtag.sourceforge.net</a><br><br>Now, it would be helpful if as many people as possible give it a try and <br>report all problems and bugs (there probably are a number of them, after <br>adding so many patches). <br><br>It's actually based on the"jtag + libbrux + include" from openwince, and <br>we still keep this partitioning - to ease merging the enhancements back <br>in openwince, just in case. Another strategy for future development of <br>openwince could be to keep the JTAG Tools "outsourced" in UrJTAG. <br><br>Kolja <br><br><br>------------------------------------------------------------------------- <br>SF.Net email is sponsored by: <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://sourceforge.net/services/buy/index.php" target="_top" rel="nofollow">http://sourceforge.net/services/buy/index.php</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14226865&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-14221926 Re: New project admin OpenWinCE 2007-12-07T14:15:37Z 2007-12-07T14:15:37Z Jeff Carr-3 On 11/11/07 09:25, Marcel Telka wrote: <div class='shrinkable-quote'><br>> Hi all. <br>> <br>> For several reasons I have no time and interest to maintain this project. It is <br>> true for several years and I see that this is really bad for everyone. <br>> <br>> The most important subproject of the OpenWinCE project is JTAG Tools. I <br>> understand that the community need to do _something_ with the JTAG Tools <br>> subproject. <br>> <br>> To make a progress in the OpenWinCE project and especially with the JTAG Tools <br>> I am offering new project admin position(s) and/or developer position(s) with <br>> CVS write access. <br>> <br>> If there is somebody who is willing to take over leadership of the OpenWinCE <br>> project, please discuss it here. </div><br>I'm also willing to help. Especially interesting to me is integrating <br>all the Xilinx parts. <br><br>Can the sourceforge project just handle a team? If so, that might be <br>best: aka several people with write access. <br><br>> Please note that I am ok with any future of the JTAG Tools and OpenWinCE, <br>> including moving it elsewhere, renaming it, or killing it. It is up to you, <br>> community. <br><br>I think everyone is happy you got the ball rolling on a project like <br>this and that you are willing to open things up to let some more <br>people have commit access. <br><br>Enjoy & happy hacking, <br>Jeff <br><br>------------------------------------------------------------------------- <br>SF.Net email is sponsored by: <br>Check out the new SourceForge.net Marketplace. <br>It's the best place to buy or sell services for <br>just about anything Open Source. <br><a href="http://sourceforge.net/services/buy/index.php" target="_top" rel="nofollow">http://sourceforge.net/services/buy/index.php</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=14221926&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-13697115 Re: jtag patch for sa1100 2007-11-11T14:56:33Z 2007-11-11T14:56:33Z Waschk,Kolja Hi Guennadi, <br><br>could you please create an "Enhancement" item at <a href="http://urjtag.sf.net" target="_top" rel="nofollow">http://urjtag.sf.net</a><br>and attach his patch, together with the notes you wrote down in your <br>mail to the list? <br><br>Thanks, <br>Kolja <br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Splunk Inc. <br>Still grepping through log files to find problems?  Stop. <br>Now Search log events and configuration files using AJAX and a browser. <br>Download your FREE copy of Splunk now >> <a href="http://get.splunk.com/" target="_top" rel="nofollow">http://get.splunk.com/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13697115&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-13694982 jtag patch for sa1100 2007-11-11T11:35:22Z 2007-11-11T11:35:22Z Guennadi Liakhovetski Hi guys, <br><br>I've being on the list for about 5-6 years now, used the jtag package <br>myself, and contributed a couple of patches too. I really enjoyed working <br>with it! <br><br>Now, some time ago I had a problem with my Tuxscreen - a nice little <br>videophone, based on the sa1100 CPU. Had to reflash it and found out, that <br>jtag didn't support sa1100 - only sa1110. I was about to write a patch <br>myself, but searching around gave me some pointers to an existing patch. I <br>contacted its author, and indeed, he kindly sent me the patch and I could <br>restore my tux. <br><br>So, since then I planned to clean up the patch and submit it to jtag, but <br>never had time for it. Don't thinik I will have time soon either. <br>Actually, the cleanup that's needed there is just replace all "shannon" <br>with "sa1100" everywhere, and adapt / test it in the current version of <br>jtag. I asked the author and he gave me his permission to submit his <br>patch. So, if anyone volunteers to do the work - "s/shannon/sa1100/g" + <br>forward-port + test, I would just send him or her the patch off-list. <br>Would be great to have sa1100 supported by jtag even though it's been <br>discontinued quite a few years ago now. <br><br>Thanks <br>Guennadi <br>--- <br>Guennadi Liakhovetski <br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Splunk Inc. <br>Still grepping through log files to find problems?  Stop. <br>Now Search log events and configuration files using AJAX and a browser. <br>Download your FREE copy of Splunk now >> <a href="http://get.splunk.com/" target="_top" rel="nofollow">http://get.splunk.com/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13694982&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-13694900 Re: New project admin OpenWinCE 2007-11-11T11:27:39Z 2007-11-11T11:27:39Z Guennadi Liakhovetski On Sun, 11 Nov 2007, Marcel Telka wrote: <br><br>> For several reasons I have no time and interest to maintain this project. It is <br>> true for several years and I see that this is really bad for everyone. <br><br>Thanks for the great software, Marcel! <br><br>Regards <br>Guennadi <br>--- <br>Guennadi Liakhovetski <br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Splunk Inc. <br>Still grepping through log files to find problems?  Stop. <br>Now Search log events and configuration files using AJAX and a browser. <br>Download your FREE copy of Splunk now >> <a href="http://get.splunk.com/" target="_top" rel="nofollow">http://get.splunk.com/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13694900&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-13694120 Re: New project admin OpenWinCE 2007-11-11T10:08:49Z 2007-11-11T10:08:49Z Marcel Telka Hi Kolja. <br><br>On Sun, Nov 11, 2007 at 06:54:06PM +0100, Waschk,Kolja wrote: <br>> > If there is somebody who is willing to take over leadership of the OpenWinCE <br>> > project, please discuss it here. <br>> <br>> We have just integrated most pending patches from the openwince tracker <br>> into CVS HEAD at <a href="http://urjtag.sf.net" target="_top" rel="nofollow">http://urjtag.sf.net</a>, a project which I initiated some <br><br>Yes. I read whole conversation. <br><br>> months ago for the purpose of creating a new jtag tool set. After mails <br>> here on the list from several people expressing interest in up-to-date <br>> openwince jtag tools, I offered that project space (and my assistance in <br>> maintaining and administering the project) to host new versions of the <br>> jtag tools from openwince. But I wouldn't go as far and do that for  the <br>> openwince project as a whole. So in my opinion the current situation is <br>> okay, with jtag tools separated from the openwince project. <br><br>Ok. <br><br><br>Regards. <br><br>-- <br>+-------------------------------------------+ <br>| Marcel Telka   e-mail:   <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13694120&i=0" target="_top" rel="nofollow">marcel@...</a>  | <br>|                homepage: <a href="http://telka.sk/" target="_top" rel="nofollow">http://telka.sk/</a> | <br>|                jabber:   <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13694120&i=1" target="_top" rel="nofollow">marcel@...</a> | <br>+-------------------------------------------+ <br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Splunk Inc. <br>Still grepping through log files to find problems?  Stop. <br>Now Search log events and configuration files using AJAX and a browser. <br>Download your FREE copy of Splunk now >> <a href="http://get.splunk.com/" target="_top" rel="nofollow">http://get.splunk.com/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13694120&i=2" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-13693994 Re: New project admin OpenWinCE 2007-11-11T09:54:06Z 2007-11-11T09:54:06Z Waschk,Kolja Hi Marcel, <br><br>> If there is somebody who is willing to take over leadership of the OpenWinCE <br>> project, please discuss it here. <br><br>We have just integrated most pending patches from the openwince tracker <br>into CVS HEAD at <a href="http://urjtag.sf.net" target="_top" rel="nofollow">http://urjtag.sf.net</a>, a project which I initiated some <br>months ago for the purpose of creating a new jtag tool set. After mails <br>here on the list from several people expressing interest in up-to-date <br>openwince jtag tools, I offered that project space (and my assistance in <br>maintaining and administering the project) to host new versions of the <br>jtag tools from openwince. But I wouldn't go as far and do that for  the <br>openwince project as a whole. So in my opinion the current situation is <br>okay, with jtag tools separated from the openwince project. <br><br>Regards from Hamburg, <br>Kolja <br><br>-- <br>Mr. Kolja Waschk - Hamburg, Germany - <a href="http://www.ixo.de" target="_top" rel="nofollow">http://www.ixo.de</a>  <br><br><br><br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Splunk Inc. <br>Still grepping through log files to find problems?  Stop. <br>Now Search log events and configuration files using AJAX and a browser. <br>Download your FREE copy of Splunk now >> <a href="http://get.splunk.com/" target="_top" rel="nofollow">http://get.splunk.com/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13693994&i=0" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-13693634 New project admin OpenWinCE 2007-11-11T09:25:17Z 2007-11-11T09:25:17Z Marcel Telka Hi all. <br><br>For several reasons I have no time and interest to maintain this project. It is <br>true for several years and I see that this is really bad for everyone. <br><br>The most important subproject of the OpenWinCE project is JTAG Tools. I <br>understand that the community need to do _something_ with the JTAG Tools <br>subproject. <br><br>To make a progress in the OpenWinCE project and especially with the JTAG Tools <br>I am offering new project admin position(s) and/or developer position(s) with <br>CVS write access. <br><br>If there is somebody who is willing to take over leadership of the OpenWinCE <br>project, please discuss it here. <br><br>Please note that I am ok with any future of the JTAG Tools and OpenWinCE, <br>including moving it elsewhere, renaming it, or killing it. It is up to you, <br>community. <br><br><br>Thank you. <br><br>-- <br>+-------------------------------------------+ <br>| Marcel Telka   e-mail:   <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13693634&i=0" target="_top" rel="nofollow">marcel@...</a>  | <br>|                homepage: <a href="http://telka.sk/" target="_top" rel="nofollow">http://telka.sk/</a> | <br>|                jabber:   <a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13693634&i=1" target="_top" rel="nofollow">marcel@...</a> | <br>+-------------------------------------------+ <br><br>------------------------------------------------------------------------- <br>This SF.net email is sponsored by: Splunk Inc. <br>Still grepping through log files to find problems?  Stop. <br>Now Search log events and configuration files using AJAX and a browser. <br>Download your FREE copy of Splunk now >> <a href="http://get.splunk.com/" target="_top" rel="nofollow">http://get.splunk.com/</a><br>_______________________________________________ <br>openwince-list mailing list <br><a href="http://www.nabble.com/user/SendEmail.jtp?type=post&post=13693634&i=2" target="_top" rel="nofollow">openwince-list@...</a> <br><a href="https://lists.sourceforge.net/lists/listinfo/openwince-list" target="_top" rel="nofollow">https://lists.sourceforge.net/lists/listinfo/openwince-list</a><br><p>From forum: <a href="http://www.nabble.com/openwince-list-f3552.html" embed="fixTarget[3552]" target="_top" >openwince-list</a></p> tag:www.nabble.com,2006:post-13623220 Re: [ openwince-Support Requests-1827345 ] LH7A400 IDCODE instruction kaput 2007-11-07T00:40:07Z 2007-11-07T00:40:07Z Andy Simpkins Not convinced it is the device ID being incorrect.  IIRC the binary ID <br>is output in such an event. <br><br>Andy <br><br>SourceForge.net wrote: <div class='shrinkable-quote'><br>> Support Requests item #18273