Step 4c absence

[Benjamin Hanowell]

I'm trying to get through the tutorial, but met a problem when
attempting to fill in Step 4c to infrastructure.GasNode.

How can I fix this problem?  The simulation will not run without it, and
as a matter of fact, I can't drop agents onto the grid without it
(unless that is due to some other problem).

Thank you!

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

[North, Michael]

Thanks for trying Repast Simphony! The label for step "4c" should
instead be "4d". This will be fixed shortly. This step is important for
the overall example, but is not related to grid display or agent
creation.

Mike

-----Original Message-----
From: repast-interest-bounces@...
[mailto:repast-interest-bounces@...] On Behalf Of
Benjamin Hanowell
Sent: Tuesday, June 03, 2008 4:49 PM
To: repast-interest@...
Subject: [Repast-interest] Step 4c absence

I'm trying to get through the tutorial, but met a problem when
attempting to fill in Step 4c to infrastructure.GasNode.

How can I fix this problem?  The simulation will not run without it, and

as a matter of fact, I can't drop agents onto the grid without it
(unless that is due to some other problem).

Thank you!

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

[docgca]

HI MIke,

I've had this same problem and can't seem to get around it by using 4d;
could you be just a little more explicit on how to proceed down that
sequence?

Gary An


-----Original Message-----
From: North, Michael <north@...>
To: Benjamin Hanowell <hanowell@...>;
repast-interest@...
Sent: Tue, 3 Jun 2008 5:05 pm
Subject: Re: [Repast-interest] Step 4c absence






Thanks for trying Repast Simphony! The label for step "4c" should
instead be "4d". This will be fixed shortly. This step is important for
the overall example, but is not related to grid display or agent
creation.

Mike

-----Original Message-----
From: repast-interest-bounces@...
[mailto:repast-interest-bounces@...] On Behalf Of
Benjamin Hanowell
Sent: Tuesday, June 03, 2008 4:49 PM
To: repast-interest@...
Subject: [Repast-interest] Step 4c absence

I'm trying to get through the tutorial, but met a problem when
attempting to fill in Step 4c to infrastructure.GasNode.

How can I fix this problem?  The simulation will not run without it, and

as a matter of fact, I can't drop agents onto the grid without it
(unless that is due to some other problem).

Thank you!

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

-------------------------------------------------------------------------

Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest






-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

[North, Michael]

Gary:

Yes, I'm happy to do this! Step "4c" was accidentally mislabeled "4d".
The steps after "4c" within activity number four that were changed by
one letter as well so that "4d" became "4e", "4e" became "4f" etc. You
can follow the tutorial as is, just 'increment' all of the letters after
"c" in activity four.

Mike

-----Original Message-----
From: docgca@... [mailto:docgca@...]
Sent: Tuesday, June 03, 2008 7:29 PM
To: North, Michael; hanowell@...;
repast-interest@...
Subject: Re: [Repast-interest] Step 4c absence

HI MIke,

I've had this same problem and can't seem to get around it by using 4d;
could you be just a little more explicit on how to proceed down that
sequence?

Gary An


-----Original Message-----
From: North, Michael <north@...>
To: Benjamin Hanowell <hanowell@...>;
repast-interest@...
Sent: Tue, 3 Jun 2008 5:05 pm
Subject: Re: [Repast-interest] Step 4c absence






Thanks for trying Repast Simphony! The label for step "4c" should
instead be "4d". This will be fixed shortly. This step is important for
the overall example, but is not related to grid display or agent
creation.

Mike

-----Original Message-----
From: repast-interest-bounces@...
[mailto:repast-interest-bounces@...] On Behalf Of
Benjamin Hanowell
Sent: Tuesday, June 03, 2008 4:49 PM
To: repast-interest@...
Subject: [Repast-interest] Step 4c absence

I'm trying to get through the tutorial, but met a problem when
attempting to fill in Step 4c to infrastructure.GasNode.

How can I fix this problem?  The simulation will not run without it, and

as a matter of fact, I can't drop agents onto the grid without it
(unless that is due to some other problem).

Thank you!

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

------------------------------------------------------------------------
-

Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest






-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

[Stefan Vitz]

Hi Mike,

I encounter the same problem discussed here before,
but i can't use your advice to come along.

My problem so far:

the tutorial says: Step 4c  infrastructuredemo.GasNode
with your advice: 4c becomes 4d.

field reads: Type in the kind of agent to Watch
Ok.. so i try, BUT

the field is not writeable at all,
instead there is an button that opens an selector-window.
window-label: please select a type
the upper line allows to type filter-strings,
so that i can select a match below.

But the only thing i can find and select are some jars of repast and java.
No GasNode.class or something that could attach the defined behavior
to my agent.

Is there a way to avoid the buggy definition and write down the
groovy code directly?
Or am i missing something here?


Thanks for your time and effords,
Stefan




On Wed, Jun 04, 2008 at 05:27:17PM -0500, North, Michael wrote:

> Gary:
>
> Yes, I'm happy to do this! Step "4c" was accidentally mislabeled "4d".
> The steps after "4c" within activity number four that were changed by
> one letter as well so that "4d" became "4e", "4e" became "4f" etc. You
> can follow the tutorial as is, just 'increment' all of the letters after
> "c" in activity four.
>
> Mike
>
> -----Original Message-----
> From: docgca@... [mailto:docgca@...]
> Sent: Tuesday, June 03, 2008 7:29 PM
> To: North, Michael; hanowell@...;
> repast-interest@...
> Subject: Re: [Repast-interest] Step 4c absence
>
> HI MIke,
>
> I've had this same problem and can't seem to get around it by using 4d;
> could you be just a little more explicit on how to proceed down that
> sequence?
>
> Gary An
>
>
> -----Original Message-----
> From: North, Michael <north@...>
> To: Benjamin Hanowell <hanowell@...>;
> repast-interest@...
> Sent: Tue, 3 Jun 2008 5:05 pm
> Subject: Re: [Repast-interest] Step 4c absence
>
>
> Thanks for trying Repast Simphony! The label for step "4c" should
> instead be "4d". This will be fixed shortly. This step is important for
> the overall example, but is not related to grid display or agent
> creation.
>
> Mike

--
   ,---\----/
   \____\  /    Stefan Vitz      Bielefeld    public GnuPG key:
_______/ \/     stefan@...   Germany      http://w148.de/~svitz/pubkey.asc


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

[docgca]

I have the same problem.

Gary


-----Original Message-----
From: Stefan Vitz <svitz@...>
To: North, Michael <north@...>;
repast-interest@...
Sent: Fri, 6 Jun 2008 7:28 am
Subject: Re: [Repast-interest] Step 4c absence











Hi Mike,

I encounter the same problem discussed here before,
but i can't use your advice to come along.

My problem so far:

the tutorial says: Step 4c  infrastructuredemo.GasNode
with your advice: 4c becomes 4d.

field reads: Type in the kind of agent to Watch
Ok.. so i try, BUT

the field is not writeable at all,
instead there is an button that opens an selector-window.
window-label: please select a type
the upper line allows to type filter-strings,
so that i can select a match below.

But the only thing i can find and select are some jars of repast and
java.
No GasNode.class or something that could attach the defined behavior
to my agent.

Is there a way to avoid the buggy definition and write down the
groovy code directly?
Or am i missing something here?


Thanks for your time and effords,
Stefan




On Wed, Jun 04, 2008 at 05:27:17PM -0500, North, Michael wrote:
> Gary:
>
> Yes, I'm happy to do this! Step "4c" was accidentally mislabeled "4d".
> The steps after "4c" within activity number four that were changed by
> one letter as well so that "4d" became "4e", "4e" became "4f" etc. You
> can follow the tutorial as is, just 'increment' all of the letters
after

> "c" in activity four.
>
> Mike
>
> -----Original Message-----
> From: docgca@... [mailto:docgca@...]
> Sent: Tuesday, June 03, 2008 7:29 PM
> To: North, Michael; hanowell@...;
> repast-interest@...
> Subject: Re: [Repast-interest] Step 4c absence
>
> HI MIke,
>
> I've had this same problem and can't seem to get around it by using

4d;

> could you be just a little more explicit on how to proceed down that
> sequence?
>
> Gary An
>
>
> -----Original Message-----
> From: North, Michael <north@...>
> To: Benjamin Hanowell <hanowell@...>;
> repast-interest@...
> Sent: Tue, 3 Jun 2008 5:05 pm
> Subject: Re: [Repast-interest] Step 4c absence
>
>
> Thanks for trying Repast Simphony! The label for step "4c" should
> instead be "4d". This will be fixed shortly. This step is important

for
> the overall example, but is not related to grid display or agent
> creation.
>
> Mike



--
   ,---\----/
   \____\  /    Stefan Vitz      Bielefeld    public GnuPG key:
_______/ \/     stefan@...   Germany      
http://w148.de/~svitz/pubkey.asc









-------------------------------------------------------------------------

Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php









_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest






-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

[North, Michael]

Stefan:

You can write code directly in Groovy, but this won't be reflected back
in the visual editor. You can try refreshing your workspace by right
clicking on the project in Eclipse and then choosing "Refresh" from the
popup menu.

Mike

-----Original Message-----
From: Stefan Vitz [mailto:svitz@...]
Sent: Friday, June 06, 2008 7:29 AM
To: North, Michael; repast-interest@...
Subject: Re: [Repast-interest] Step 4c absence


Hi Mike,

I encounter the same problem discussed here before,
but i can't use your advice to come along.

My problem so far:

the tutorial says: Step 4c  infrastructuredemo.GasNode
with your advice: 4c becomes 4d.

field reads: Type in the kind of agent to Watch
Ok.. so i try, BUT

the field is not writeable at all,
instead there is an button that opens an selector-window.
window-label: please select a type
the upper line allows to type filter-strings,
so that i can select a match below.

But the only thing i can find and select are some jars of repast and
java.
No GasNode.class or something that could attach the defined behavior
to my agent.

Is there a way to avoid the buggy definition and write down the
groovy code directly?
Or am i missing something here?


Thanks for your time and effords,
Stefan




On Wed, Jun 04, 2008 at 05:27:17PM -0500, North, Michael wrote:
> Gary:
>
> Yes, I'm happy to do this! Step "4c" was accidentally mislabeled "4d".
> The steps after "4c" within activity number four that were changed by
> one letter as well so that "4d" became "4e", "4e" became "4f" etc. You
> can follow the tutorial as is, just 'increment' all of the letters
after

> "c" in activity four.
>
> Mike
>
> -----Original Message-----
> From: docgca@... [mailto:docgca@...]
> Sent: Tuesday, June 03, 2008 7:29 PM
> To: North, Michael; hanowell@...;
> repast-interest@...
> Subject: Re: [Repast-interest] Step 4c absence
>
> HI MIke,
>
> I've had this same problem and can't seem to get around it by using

4d;

> could you be just a little more explicit on how to proceed down that
> sequence?
>
> Gary An
>
>
> -----Original Message-----
> From: North, Michael <north@...>
> To: Benjamin Hanowell <hanowell@...>;
> repast-interest@...
> Sent: Tue, 3 Jun 2008 5:05 pm
> Subject: Re: [Repast-interest] Step 4c absence
>
>
> Thanks for trying Repast Simphony! The label for step "4c" should
> instead be "4d". This will be fixed shortly. This step is important

for
> the overall example, but is not related to grid display or agent
> creation.
>
> Mike



--
   ,---\----/
   \____\  /    Stefan Vitz      Bielefeld    public GnuPG key:
_______/ \/     stefan@...   Germany
http://w148.de/~svitz/pubkey.asc

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

[Tara]

I'm having the same problem.
(WIndows XP)
Looks like groovy is 1.1.0

Can't put in infrastructuredemo.GasNode in 4d
($c is not there)

[Jean Le Fur]

Hello,
I also get the problem of filling the step 4.d on the tutorial example (kind of agent to watch: Infrastructuredemo.GasNode)

After intensive exploring of the forum threads, I could not succeed in finding what was the real solution (downgrading from Groovy 1.5 to Groovy 1.1 ?, changing a property ?)

I work on Ubuntu 7.1, eclipse 3.2, Java 1.5  (but my windows xp version works almost fine on this part of the tutorial)
any help would be appreciated to understand and solve this problem.
Jean

docgca wrote:

I have the same problem.
Gary


-----Original Message-----
From: Stefan Vitz <[e-mail]>
To: North, Michael <[e-mail]>;
[e-mail]
Sent: Fri, 6 Jun 2008 7:28 am
Subject: Re: [Repast-interest] Step 4c absence
Hi Mike,

I encounter the same problem discussed here before,
but i can't use your advice to come along.

My problem so far:

the tutorial says: Step 4c  infrastructuredemo.GasNode
with your advice: 4c becomes 4d.

field reads: Type in the kind of agent to Watch
Ok.. so i try, BUT

the field is not writeable at all,
instead there is an button that opens an selector-window.
window-label: please select a type
the upper line allows to type filter-strings,
so that i can select a match below.

But the only thing i can find and select are some jars of repast and
java.
No GasNode.class or something that could attach the defined behavior
to my agent.

Is there a way to avoid the buggy definition and write down the
groovy code directly?
Or am i missing something here?


Thanks for your time and effords,
Stefan

[North, Michael]

Jean:

This has been fixed in the release we are planning on distributing next
week.

Mike

-----Original Message-----
From: repast-interest-bounces@...
[mailto:repast-interest-bounces@...] On Behalf Of Jean
Le Fur
Sent: Tuesday, July 15, 2008 4:06 AM
To: repast-interest@...
Subject: Re: [Repast-interest] Step 4d filling the kind of agent ot
watch


Hello,
I also get the problem of filling the step 4.d on the tutorial example
(kind
of agent to watch: Infrastructuredemo.GasNode)

After intensive exploring of the forum threads, I could not succeed in
finding what was the real solution (downgrading from Groovy 1.5 to
Groovy
1.1 ?, changing a property ?)

I work on Ubuntu 7.1, eclipse 3.2, Java 1.5  (but my windows xp version
works almost fine on this part of the tutorial)
any help would be appreciated to understand and solve this problem.
Jean



docgca wrote:

>
> I have the same problem.
> Gary
>
>
> -----Original Message-----
> From: Stefan Vitz <svitz@...>
> To: North, Michael <north@...>;
> repast-interest@...
> Sent: Fri, 6 Jun 2008 7:28 am
> Subject: Re: [Repast-interest] Step 4c absence
> Hi Mike,
>
> I encounter the same problem discussed here before,
> but i can't use your advice to come along.
>
> My problem so far:
>
> the tutorial says: Step 4c  infrastructuredemo.GasNode
> with your advice: 4c becomes 4d.
>
> field reads: Type in the kind of agent to Watch
> Ok.. so i try, BUT
>
> the field is not writeable at all,
> instead there is an button that opens an selector-window.
> window-label: please select a type
> the upper line allows to type filter-strings,
> so that i can select a match below.
>
> But the only thing i can find and select are some jars of repast and
> java.
> No GasNode.class or something that could attach the defined behavior
> to my agent.
>
> Is there a way to avoid the buggy definition and write down the
> groovy code directly?
> Or am i missing something here?
>
>
> Thanks for your time and effords,
> Stefan
>
>

--
View this message in context:
http://www.nabble.com/Step-4c-absence-tp17634582p18460870.html
Sent from the repast-interest mailing list archive at Nabble.com.


------------------------------------------------------------------------
-
This SF.Net email is sponsored by the Moblin Your Move Developer's
challenge
Build the coolest Linux based applications with Moblin SDK & win great
prizes
Grand prize is a trip for two to an Open Source event anywhere in the
world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Repast-interest mailing list
Repast-interest@...
https://lists.sourceforge.net/lists/listinfo/repast-interest