Hi Shane,
> > Thanks for getting back so quickly. I am only using the robostix and an
> > STK500 to program it. (I don't even have a gumstix board) I've mounted the
> > 'tweener' board on the robostix board and then connected the tweener to the
> > output. I've downloaded Flash-LED.hex to the robostix, I know it is running
> > because the LEDs are flashing. However when I try to read the outputs from
> > the UART0 I get garbage. I would like to use the tweener board for I/O from
> > the keyboard, but I cannot. Also, my robostix and tweener looks very
> > different from the one in the link. Thanks again!
Ahhhh - there are RS-232 to logic-level voltage converters included on
the STK-500, so you should be able to use one of those.
--
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/_______________________________________________
gumstix-users mailing list
gumstix-users@...
https://lists.sourceforge.net/lists/listinfo/gumstix-users
