|
»
»
»
« Return to Thread: audacity 1.3.3 importing errors
Re: audacity 1.3.3 importing errors
by John Kelleher
::
Rate this Message:
Hello Gale Andrews,
Thank you for your prompt reply. I must admit that I find some of your
Windows-centric references obscure. I have always compiled audacity
from source. The partition I had previously been using for my work uses
kernel 2.4.x and gcc 3.4.6, and I use audacity 1.2.4b there with
success. Both 1.2.6 and 1.2.4b fail to compile with various
(non-wxwidgets) errors in this upgraded (different) partition, though
1.3.3 compiles without errors. The behavior of 1.3.3 I have noted
represents a significant performance degradation for me. I call your
attention to the following:
a) output of 'man audacity' (the one installed with v. 1.3.3):
...
If you specify multiple files on the command-line, Audacity will
import all of them into the same project, which is convenient if you
want to mix them.
...
b) Yes, it would be extremely convenient if audacity did what it claims
to do!
c) I say again, audacity *should* import all files specified on the
command line "into the same project", just as the man page claims it
will, AND it should preserve the ORDER of the files as listed, just as
it used to.
d) Again, formerly, when importing from the GUI, as I clicked on each
file, its name appeared in a nice little 'open' line right within the
dialog box. I could both see and specify the ORDER of files I wanted
imported, which would be translated into the top-bottom ORDER in which
audacity would import them.
e) It looks to me like I am requesting that a performance
characteristic that is significantly degraded in the current version be
restored. You are welcome to call that a 'feature request' if you wish,
as long as it gets fixed.
John Kelleher
--- Audacity Help <audacity-help@...> wrote:
>
> | From John Kelleher
> | Mon, 10 Sep 2007 10:57:23 -0700 (PDT)
> | Subject: [Audacity-help] audacity 1.3.3 importing errors
> | audacity 1.3.3
> | linux
> | slackware 12.0
> | gcc 4.1.2
> | kernel 2.6.21.5
> |
> | This version of audacity does NOT import multiple files into
> one
> | project from the command line. Instead it opens them in
> separate
> | windows.
> |
> | Also, I liked how audacity 1.2.x, when importing from the GUI
> (and from
> | the command line) would insert the files top to bottom
> depending on the
> | order I specified. E.g., if I wanted to see:
> |
> | goo.wav
> | foo.wav
> | doo.wav
> |
> | I said 'audacity goo.wav foo.wav doo.wav', or choose those
> files from
> | the GUI (with CTRL-mouse click) in that order.
> |
> | But 1.3.3 alphabetizes the files before inserting, resulting
> in:
> |
> | doo.wav
> | foo.wav
> | goo.wav
> |
> | which forces me to manually rearrange their order after
> importing.
>
> I am on Windows but I will comment as follows. I cannot replicate
> your
> issue with 1.3.3 alphabetising when inserting as it does not do this.
> For
> me the behaviour when CTRL + clicking on a batch of files is the same
>
> with either 1.2.6 or 1.3.3 - you get the files in the order they are
> in
> in the file manager. So if I clicked on goo.wav before foo.wav but
> the
> file view was sorted in alphabetical order, I will always get foo.wav
>
> at the top of the list. If I sort the list in reverse alphabetical
> order, and
> click on foo.wav then goo.wav, I get goo.wav at the top of the list.
> Is this the explanation for your issue, and if not, have you built
> Audacity
> from source code or did you install an Audacity package provided by
> your
> distribution?
>
> Importing multiple files into multiple windows arose from a change we
> made
> so that you could right-click a file from a file manager and "Open
> with
> Audacity" when Audacity was already running. Previously in 1.2.6 if
> you did
> this you would only receive a warning that Audacity was already
> running,
> because the right-click command was interpreted as a command to open
> another instance of Audacity, whereas only one instance of Audacity
> is
> allowed at a time. It is not necessary that the change should be
> implemented
> in this way so that multiple files import into multiple windows,
> though some
> users might prefer this. I personally think it would be more useful
> if by
> default Audacity always imported subsequent files into the same
> window (so
> that as you say multiple drag retains the 1.2.6 behaviour) but that
> it should
> also be a user preference. I will add your suggestion to our
> user-editable
> Feature Requests page:
> http://audacityteam.org/wiki/index.php?title=Feature_Requests
>
> Please feel free to visit the page and add your vote to any of the
> other
> suggestions made there.
>
>
> Gale Andrews
>
>
>
> Outbound message virus free.
> Tested on: 9/10/2007 8:25:16 PM
>
>
>
>
____________________________________________________________________________________
Yahoo! oneSearch: Finally, mobile search
that gives answers, not web links.
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
--
Audacity-help mailing list
Audacity-help@...
https://lists.sourceforge.net/lists/listinfo/audacity-help
Thank you for your prompt reply. I must admit that I find some of your
Windows-centric references obscure. I have always compiled audacity
from source. The partition I had previously been using for my work uses
kernel 2.4.x and gcc 3.4.6, and I use audacity 1.2.4b there with
success. Both 1.2.6 and 1.2.4b fail to compile with various
(non-wxwidgets) errors in this upgraded (different) partition, though
1.3.3 compiles without errors. The behavior of 1.3.3 I have noted
represents a significant performance degradation for me. I call your
attention to the following:
a) output of 'man audacity' (the one installed with v. 1.3.3):
...
If you specify multiple files on the command-line, Audacity will
import all of them into the same project, which is convenient if you
want to mix them.
...
b) Yes, it would be extremely convenient if audacity did what it claims
to do!
c) I say again, audacity *should* import all files specified on the
command line "into the same project", just as the man page claims it
will, AND it should preserve the ORDER of the files as listed, just as
it used to.
d) Again, formerly, when importing from the GUI, as I clicked on each
file, its name appeared in a nice little 'open' line right within the
dialog box. I could both see and specify the ORDER of files I wanted
imported, which would be translated into the top-bottom ORDER in which
audacity would import them.
e) It looks to me like I am requesting that a performance
characteristic that is significantly degraded in the current version be
restored. You are welcome to call that a 'feature request' if you wish,
as long as it gets fixed.
John Kelleher
--- Audacity Help <audacity-help@...> wrote:
>
> | From John Kelleher
> | Mon, 10 Sep 2007 10:57:23 -0700 (PDT)
> | Subject: [Audacity-help] audacity 1.3.3 importing errors
> | audacity 1.3.3
> | linux
> | slackware 12.0
> | gcc 4.1.2
> | kernel 2.6.21.5
> |
> | This version of audacity does NOT import multiple files into
> one
> | project from the command line. Instead it opens them in
> separate
> | windows.
> |
> | Also, I liked how audacity 1.2.x, when importing from the GUI
> (and from
> | the command line) would insert the files top to bottom
> depending on the
> | order I specified. E.g., if I wanted to see:
> |
> | goo.wav
> | foo.wav
> | doo.wav
> |
> | I said 'audacity goo.wav foo.wav doo.wav', or choose those
> files from
> | the GUI (with CTRL-mouse click) in that order.
> |
> | But 1.3.3 alphabetizes the files before inserting, resulting
> in:
> |
> | doo.wav
> | foo.wav
> | goo.wav
> |
> | which forces me to manually rearrange their order after
> importing.
>
> I am on Windows but I will comment as follows. I cannot replicate
> your
> issue with 1.3.3 alphabetising when inserting as it does not do this.
> For
> me the behaviour when CTRL + clicking on a batch of files is the same
>
> with either 1.2.6 or 1.3.3 - you get the files in the order they are
> in
> in the file manager. So if I clicked on goo.wav before foo.wav but
> the
> file view was sorted in alphabetical order, I will always get foo.wav
>
> at the top of the list. If I sort the list in reverse alphabetical
> order, and
> click on foo.wav then goo.wav, I get goo.wav at the top of the list.
> Is this the explanation for your issue, and if not, have you built
> Audacity
> from source code or did you install an Audacity package provided by
> your
> distribution?
>
> Importing multiple files into multiple windows arose from a change we
> made
> so that you could right-click a file from a file manager and "Open
> with
> Audacity" when Audacity was already running. Previously in 1.2.6 if
> you did
> this you would only receive a warning that Audacity was already
> running,
> because the right-click command was interpreted as a command to open
> another instance of Audacity, whereas only one instance of Audacity
> is
> allowed at a time. It is not necessary that the change should be
> implemented
> in this way so that multiple files import into multiple windows,
> though some
> users might prefer this. I personally think it would be more useful
> if by
> default Audacity always imported subsequent files into the same
> window (so
> that as you say multiple drag retains the 1.2.6 behaviour) but that
> it should
> also be a user preference. I will add your suggestion to our
> user-editable
> Feature Requests page:
> http://audacityteam.org/wiki/index.php?title=Feature_Requests
>
> Please feel free to visit the page and add your vote to any of the
> other
> suggestions made there.
>
>
> Gale Andrews
>
>
>
> Outbound message virus free.
> Tested on: 9/10/2007 8:25:16 PM
>
>
>
>
____________________________________________________________________________________
Yahoo! oneSearch: Finally, mobile search
that gives answers, not web links.
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
--
Audacity-help mailing list
Audacity-help@...
https://lists.sourceforge.net/lists/listinfo/audacity-help
« Return to Thread: audacity 1.3.3 importing errors
| Free Forum Powered by Nabble | Forum Help |