« Return to Thread: How to modify MSC0 register on Memory Controller for PXA270

Re: WPA2 question

by sakoman :: Rate this Message:

That tutorial is for buildroot.

For gumstix-oe, you will need to edit your /etc/network/interfaces
file. Look for the section on WPA, the comments should be self
explanatory. BTW, in gumstix-oe wpa_supplicant is in /usr/sbin/

Steve

On Mon, May 12, 2008 at 7:05 PM, John Riggs <jriggs04@...> wrote:

> SO I am following the tutorial here..
> http://docwiki.gumstix.org/WPA_for_wifistix
>
> I think I have most stuff setup correctly.. but I get this error..
> /bin/sh: /sbin/wpa_supplicant: not found
>
> Sure enough there is nothing in sbin named that.. I do have
> /etc/wpa_supplicant/ but if I try and put that in the "interfaces" file, I
> get "permission denied"
>
> Any ideas?
>
> I am running the x11-32mb image
>
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> gumstix-users mailing list
> gumstix-users@...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
gumstix-users mailing list
gumstix-users@...
https://lists.sourceforge.net/lists/listinfo/gumstix-users

« Return to Thread: How to modify MSC0 register on Memory Controller for PXA270