Or even easier, pick up the tarballs from:
http://www.sakoman.net/oe/cf-boot/Steve
On Mon, May 12, 2008 at 11:44 AM, Steve Sakoman <
sakoman@...> wrote:
> Take a look in your extras/cf-root directory for the script.
>
> Steve
>
>
>
> On Mon, May 12, 2008 at 11:34 AM, Scott Lerman <
smlerman@...> wrote:
> > The gumstix-factory.script from that wiki page has this:
> >
> > if mmcinit; then
> > setenv bootargs console=ttyS0,115200n8 rootdelay=1 root=/dev/mmcblk0p2
> > if fatload mmc 0 a2000000 uimage; then
> > set workedok Success
> > fi
> > fi
> >
> > Since I'm using CF instead of MMC, does this look right:
> >
> > if pinit on; then
> > setenv bootargs rw console=ttyS0,115200n8 reboot=cold,hard MEDIA=CF
> > if fatload ide 0 a2000000 uimage; then
> > set workedok Success
> > fi
> > fi
> >
> >
> >
> > --
> > Scott Lerman
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> >
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/> > _______________________________________________
> > gumstix-users mailing list
> >
gumstix-users@...
> >
https://lists.sourceforge.net/lists/listinfo/gumstix-users> >
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/_______________________________________________
gumstix-users mailing list
gumstix-users@...
https://lists.sourceforge.net/lists/listinfo/gumstix-users