Hi Ed,
> Looking over the specs for the breakout-gs board, when used with a
> Vertex processor, there seems to be some discrepancies on what the
> actual pins do. Where can I find an accurate description of what is
> available on each of the pins of the Vertex board 60 pin connector?
> For example, the pcb10016.sch has BT-TXD on one pin, and the
> B00011.sch has BT-TXD on a totally different pin. Which is correct.
> Where can I get the definitive answer as to what signal is on each
> pin of the breakout-gs board, when used with a Vertex processor?
You look at this page:
<
http://docswiki.gumstix.com/index.php/Verdex_60pin_connector_chart>
and then sync it up with the breakout-gs schematics.
You can compare these two pages to see where the differences are.
<
http://docswiki.gumstix.com/index.php/Verdex_60pin_connector_chart>
<
http://docswiki.gumstix.com/index.php/New_60pin_connector_chart>
For example, on the verdex, BTTXD is on pin 35, where on the connex
pin 35 is HWTXD.
Since the breakout-gs was designed for the connex, the pin labelled as
HWTXD will be connected through to BTTXD when a verdex is plugged in.
--
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/_______________________________________________
gumstix-users mailing list
gumstix-users@...
https://lists.sourceforge.net/lists/listinfo/gumstix-users
