|
»
»
»
« Return to Thread: Profile activation/deactivation
RE: Profile activation/deactivation
by Bernhard David
::
Rate this Message:
Hello,
here's a suggestion Re. point 2
> 2. Should default profiles be automatically deactivated if another
profile is
> activated? I don't think the current behaviour should be changed in
2.0.x, but
> for 2.1 I think it's worth considering leaving default profiles active
unless
> explicitly disabled.
would it be possible to have "-Pprofile" work as usual (activate
profile, deactivate defaults) but "-P+profile" add profile to the
existing ones, without deactivating defaults? Or if "+" is taken we
could use some other character.
In any case it would be really useful to add profiles like this, for
instance to support "mvn install -P+optionalTests" without having to
figure out what other profiles you need manually.
Greetings,
David Bernhard
> -----Original Message-----
> From: Jesse McConnell [mailto:jesse.mcconnell@...]
> Sent: 15 May 2008 00:04
> To: Maven Developers List
> Subject: Re: Profile activation/deactivation
>
> I think the ! is probably better then D: E: E:
>
> jesse
>
> On Wed, May 14, 2008 at 4:51 PM, Paul Gier <pgier@...> wrote:
> > Brian E. Fox wrote:
> >
> > > <snip>
> > > Need to think about 1& 2 some more but:
> > >
> > >
> > > > 3. There was a suggestion to allow the use of "!" to
> disable a profile.
> > > >
> > > So the
> > >
> > > > command line would look like: mvn -P!myProfile
> > > >
> > >
> > >
> > > > This seems more intuitive than the current syntax using
> a dash, and I
> > > >
> > > created
> > >
> > > > MNG-3571 for it. But I'm hesitant to add it since we
> can already use
> > > >
> > > "-" for
> > >
> > > > this, and it looks like "mvn -P D:myProfile" was added
> as another
> > > >
> > > option for
> > >
> > > > disabling a profile in 2.1.
> > > >
> > >
> > > As far as I know, the - never worked so going to ! is
> better...I think
> > > the 2.1 deactivation should be brought in line as
> well...we don't need
> > > more proliferation of changes.
> > >
> > >
> >
> > Should I remove both "-" and "+" since they would both be
> redundant if we
> > add "!"?
> >
> > So some examples would be:
> > mvn -P !profile1,profile2,profile3
> >
> > And in maven 2.1 currently this can also be expressed with:
> > mvn -P D:profile1,E:profile2,E:profile3
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: dev-unsubscribe@...
> > For additional commands, e-mail: dev-help@...
> >
> >
>
>
>
> --
> jesse mcconnell
> jesse.mcconnell@...
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@...
> For additional commands, e-mail: dev-help@...
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...
here's a suggestion Re. point 2
> 2. Should default profiles be automatically deactivated if another
profile is
> activated? I don't think the current behaviour should be changed in
2.0.x, but
> for 2.1 I think it's worth considering leaving default profiles active
unless
> explicitly disabled.
would it be possible to have "-Pprofile" work as usual (activate
profile, deactivate defaults) but "-P+profile" add profile to the
existing ones, without deactivating defaults? Or if "+" is taken we
could use some other character.
In any case it would be really useful to add profiles like this, for
instance to support "mvn install -P+optionalTests" without having to
figure out what other profiles you need manually.
Greetings,
David Bernhard
> -----Original Message-----
> From: Jesse McConnell [mailto:jesse.mcconnell@...]
> Sent: 15 May 2008 00:04
> To: Maven Developers List
> Subject: Re: Profile activation/deactivation
>
> I think the ! is probably better then D: E: E:
>
> jesse
>
> On Wed, May 14, 2008 at 4:51 PM, Paul Gier <pgier@...> wrote:
> > Brian E. Fox wrote:
> >
> > > <snip>
> > > Need to think about 1& 2 some more but:
> > >
> > >
> > > > 3. There was a suggestion to allow the use of "!" to
> disable a profile.
> > > >
> > > So the
> > >
> > > > command line would look like: mvn -P!myProfile
> > > >
> > >
> > >
> > > > This seems more intuitive than the current syntax using
> a dash, and I
> > > >
> > > created
> > >
> > > > MNG-3571 for it. But I'm hesitant to add it since we
> can already use
> > > >
> > > "-" for
> > >
> > > > this, and it looks like "mvn -P D:myProfile" was added
> as another
> > > >
> > > option for
> > >
> > > > disabling a profile in 2.1.
> > > >
> > >
> > > As far as I know, the - never worked so going to ! is
> better...I think
> > > the 2.1 deactivation should be brought in line as
> well...we don't need
> > > more proliferation of changes.
> > >
> > >
> >
> > Should I remove both "-" and "+" since they would both be
> redundant if we
> > add "!"?
> >
> > So some examples would be:
> > mvn -P !profile1,profile2,profile3
> >
> > And in maven 2.1 currently this can also be expressed with:
> > mvn -P D:profile1,E:profile2,E:profile3
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: dev-unsubscribe@...
> > For additional commands, e-mail: dev-help@...
> >
> >
>
>
>
> --
> jesse mcconnell
> jesse.mcconnell@...
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@...
> For additional commands, e-mail: dev-help@...
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...
« Return to Thread: Profile activation/deactivation
| Free Forum Powered by Nabble | Forum Help |