Pyzor issue since upgrade to 3.1.3

[James Pratt-2]

Hi. ever since I updated a test relay to SA 3.1.3 from 3.1.2,  pyzor
(0.40) has stopped(?) working ...

spamassassin -D --lint

<snip>
[7207] dbg: pyzor: pyzor is available: /usr/bin/pyzor
[7207] dbg: info: entering helper-app run mode
[7207] dbg: pyzor: opening pipe: /usr/bin/pyzor check <
/tmp/.spamassassin72070f78SItmp
[7208] dbg: util: setuid: ruid=0 euid=0
[7207] dbg: pyzor: killed stale helper [7208]
[7207] dbg: pyzor: [7208] terminated: exit=0x000f
[7207] dbg: info: leaving helper-app run mode
[7207] dbg: pyzor: check timed out after 5 seconds
<snip>

It's been doing this since the update, no pyzor checks seem to work
anymore judging from test spam reports etc.., anyone else seeing this?
I've tried the "patched" version of pyzor and the unpatched version

I'm running with sendmail 8.13.6, mimedefang 2.56, latest Dcc/razor2
(both still work great) - all else seems to work fine...

any ideas? I've googled for it, but no luck...

(This is from my sa-mimedefang.cf - takes the place of sa's default
system-wide default local.cf with mimedefang) :

## pyzor opts
use_pyzor               1
pyzor_options --homedir /etc/mail/spamassassin/.pyzor



thanks,
Jamie

[Kelson Vibber]

James E. Pratt wrote:
> Hi. ever since I updated a test relay to SA 3.1.3 from 3.1.2,  pyzor
> (0.40) has stopped(?) working ...

I doubt it has anything to do with the SA update.  Try running the pyzor
tools directly -- you'll probably find they don't work either.

 From what I can tell, Pyzor's server has been down for a few days.

--
Kelson Vibber
SpeedGate Communications <www.speed.net>

[Chris-3]

On Tuesday 06 June 2006 11:37 am, Kelson wrote:
> James E. Pratt wrote:
> > Hi. ever since I updated a test relay to SA 3.1.3 from 3.1.2,  pyzor
> > (0.40) has stopped(?) working ...
>
> I doubt it has anything to do with the SA update.  Try running the pyzor
> tools directly -- you'll probably find they don't work either.
>
>  From what I can tell, Pyzor's server has been down for a few days.

A mirror was setup a couple of months ago, I've placed this
82.94.255.100:24441, in place of the pyzor server shown when 'pyzor
discover' is run.  I haven't had any problems since. Of course if 'pyzor
discover' is run you'll have to replace it again.

--
Chris
Registered Linux User 283774 http://counter.li.org
20:26:44 up 23 days, 8:26, 1 user, load average: 0.22, 0.25, 0.15
Mandriva Linux 10.1 Official, kernel 2.6.8.1-12mdk