Postgis and ArcGIS

[Tim Bowden]

Hi all,

I'm looking for the best way of allowing interaction between PostGIS on
the back end and ArcGIS on the desktop.  Something like PgArc would be
good, but obviously very difficult to implement :-(

There is avpgcon which supports ArcView 3.x (only?).  Is anyone able to
shed any light on other options or report success with either of these
options?  Can any of the ArcGIS stuff do wfs-t thereby allowing us to
put geoserver in as an interface?

Thanks,
Tim Bowden

_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

[Uwe Seher-3]

Am 09.02.2007, 05:14 Uhr, schrieb Tim Bowden <tim.bowden@...>:

> Hi all,
>
> I'm looking for the best way of allowing interaction between PostGIS on
> the back end and ArcGIS on the desktop.  Something like PgArc would be
> good, but obviously very difficult to implement :-(
>
> There is avpgcon which supports ArcView 3.x (only?).  Is anyone able to
> shed any light on other options or report success with either of these
> options?  Can any of the ArcGIS stuff do wfs-t thereby allowing us to
> put geoserver in as an interface?
>
> Thanks,
> Tim Bowden
>
> _______________________________________________
> postgis-users mailing list
> postgis-users@...
> http://postgis.refractions.net/mailman/listinfo/postgis-users

Hi!

You can try this (http://gforge2.uwc.ac.za/projects/ziggis/), but it seems  
that there is not very much going. I think the problem in connecting  
PostGIS and ArcGIS is in the ArcObjects workspaces to handle the  
Datasource. As a Workaround you can use a tempoprary shapefile like pgArc  
or you can setup a WMS. A WFS should also work, althought i didn't test  
it. Or you can use something other than ArcGIS. Our way at the moment is  
to separate workingareas as a shapefile and update them, when finished.

CU Uwe Seher
_____________________________________
ingenieurbüro kauppert

nebeniusstr. 34
d-76137 karlsruhe

fon   [phone]
fax   [phone]

email uwe.seher@...
web   www.ib-kauppert.de
_____________________________________
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

[Tim Bowden]

On Fri, 2007-02-09 at 09:00 +0100, Uwe Seher wrote:

> Am 09.02.2007, 05:14 Uhr, schrieb Tim Bowden <tim.bowden@...>:
>
> > Hi all,
> >
> > I'm looking for the best way of allowing interaction between PostGIS on
> > the back end and ArcGIS on the desktop.  Something like PgArc would be
> > good, but obviously very difficult to implement :-(
> >
> > There is avpgcon which supports ArcView 3.x (only?).  Is anyone able to
> > shed any light on other options or report success with either of these
> > options?  Can any of the ArcGIS stuff do wfs-t thereby allowing us to
> > put geoserver in as an interface?
> >
> > Thanks,
> > Tim Bowden
> >
> > _______________________________________________
> > postgis-users mailing list
> > postgis-users@...
> > http://postgis.refractions.net/mailman/listinfo/postgis-users
>
> Hi!
>
> You can try this (http://gforge2.uwc.ac.za/projects/ziggis/), but it seems  
> that there is not very much going. I think the problem in connecting  
> PostGIS and ArcGIS is in the ArcObjects workspaces to handle the  
> Datasource. As a Workaround you can use a tempoprary shapefile like pgArc  
> or you can setup a WMS. A WFS should also work, althought i didn't test  
> it. Or you can use something other than ArcGIS. Our way at the moment is  
> to separate workingareas as a shapefile and update them, when finished.
>
> CU Uwe Seher
> _____________________________________

Thanks,

I was hoping someone had some better news.

Regards,
Tim Bowden

_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

[Frank Koormann]

* Tim Bowden <tim.bowden@...> [070209 14:09]:
> On Fri, 2007-02-09 at 09:00 +0100, Uwe Seher wrote:
> > You can try this (http://gforge2.uwc.ac.za/projects/ziggis/), but it seems  
> > that there is not very much going.
>
> I was hoping someone had some better news.
>

The linked site seems to be somewhat outdated. However, last December a
news came across this list:

ZigGis 1.1 available!
http://postgis.refractions.net/pipermail/postgis-users/2006-December/014217.html 
HTH,

        Frank Koormann

--
Frank Koormann                             <frank.koormann@...>
 Professional Service around Free Software       (http://intevation.net/)
 FreeGIS Project                                 (http://freegis.org/)
 PostGIS Support (http://www.intevation.net/geospatial/postgis-support.en.html)
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

[Tim Bowden]

On Fri, 2007-02-09 at 14:18 +0100, Frank Koormann wrote:

> * Tim Bowden <tim.bowden@...> [070209 14:09]:
> > On Fri, 2007-02-09 at 09:00 +0100, Uwe Seher wrote:
> > > You can try this (http://gforge2.uwc.ac.za/projects/ziggis/), but it seems  
> > > that there is not very much going.
> >
> > I was hoping someone had some better news.
> >
>
> The linked site seems to be somewhat outdated. However, last December a
> news came across this list:
>
> ZigGis 1.1 available!
> http://postgis.refractions.net/pipermail/postgis-users/2006-December/014217.html 
> HTH,
>
>         Frank Koormann
>

It's still alive! Looks more promising.  Thanks Frank.  It's a read only
job for now, but still useful.

Regards,
Tim Bowden

_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

[Paolo Corti]

Yes, zigGIS web site has moved
now is here and actually the project is very active:
http://code.google.com/p/ziggis/

if you are in troubles use the ziggis group:
http://groups.google.com/group/ziggis

best regards
Paolo Corti

Tim Bowden wrote:

On Fri, 2007-02-09 at 14:18 +0100, Frank Koormann wrote:
> * Tim Bowden <[e-mail]> [070209 14:09]:
> > On Fri, 2007-02-09 at 09:00 +0100, Uwe Seher wrote:
> > > You can try this (http://gforge2.uwc.ac.za/projects/ziggis/), but it seems  
> > > that there is not very much going.
> >
> > I was hoping someone had some better news.
> >
>
> The linked site seems to be somewhat outdated. However, last December a
> news came across this list:
>
> ZigGis 1.1 available!
> http://postgis.refractions.net/pipermail/postgis-users/2006-December/014217.html 
> HTH,
>
>         Frank Koormann
>

It's still alive! Looks more promising.  Thanks Frank.  It's a read only
job for now, but still useful.

Regards,
Tim Bowden

_______________________________________________
postgis-users mailing list
[e-mail]
http://postgis.refractions.net/mailman/listinfo/postgis-users

[Abe Gillespie]

And, as always, we're interested in any contributions.  ;)

Thanks to Paolo and Bill for reigniting the fire.

-Abe

On 2/22/07, Paolo Corti <pcorti@...> wrote:

>
> Yes, zigGIS web site has moved
> now is here and actually the project is very active:
> http://code.google.com/p/ziggis/
>
> if you are in troubles use the ziggis group:
> http://groups.google.com/group/ziggis
>
> best regards
> Paolo Corti
>
>
>
> Tim Bowden wrote:
> >
> > On Fri, 2007-02-09 at 14:18 +0100, Frank Koormann wrote:
> >> * Tim Bowden <tim.bowden@...> [070209 14:09]:
> >> > On Fri, 2007-02-09 at 09:00 +0100, Uwe Seher wrote:
> >> > > You can try this (http://gforge2.uwc.ac.za/projects/ziggis/), but it
> >> seems
> >> > > that there is not very much going.
> >> >
> >> > I was hoping someone had some better news.
> >> >
> >>
> >> The linked site seems to be somewhat outdated. However, last December a
> >> news came across this list:
> >>
> >> ZigGis 1.1 available!
> >> http://postgis.refractions.net/pipermail/postgis-users/2006-December/014217.html
> >> HTH,
> >>
> >>         Frank Koormann
> >>
> >
> > It's still alive! Looks more promising.  Thanks Frank.  It's a read only
> > job for now, but still useful.
> >
> > Regards,
> > Tim Bowden
> >
> > _______________________________________________
> > postgis-users mailing list
> > postgis-users@...
> > http://postgis.refractions.net/mailman/listinfo/postgis-users
> >
> >
>
> --
> View this message in context: http://www.nabble.com/Postgis-and-ArcGIS-tf3198218.html#a9105359
> Sent from the PostGIS - User mailing list archive at Nabble.com.
>
> _______________________________________________
> postgis-users mailing list
> postgis-users@...
> http://postgis.refractions.net/mailman/listinfo/postgis-users
>

_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users