|
»
»
»
Posted ClamAV 0.93.3 for efw2
|
View:
New views
7 Messages
—
Rating Filter:
Alert me
|
 |
Posted ClamAV 0.93.3 for efw2
by Mike Tremaine
::
Rate this Message:
In the normal place just fyi for anyone who needs it. I will not actually install it in production until tomorrow but it seems to be ok. -Mike ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user |
|
|
ClamAV 0.92.1
by compdoc
::
Rate this Message:
Ive gotten 0.92.1 working on a pair of ewf 2.1 servers, and
also on a pair of 2.1.2 servers. There is a difference in size of the files clamd.conf and freshclam.conf between the two versions of efw, since they had different versions of clamav. (I'm pretty sure) The newer one is larger. I haven't taken the time to compare them, but is there any need to keep the older version around for 2.1? Anyone know off hand? ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user |
|
|
efw 2.1
by compdoc
::
Rate this Message:
For 2.1, is it possible to enable secure file transfer?
2.1.2 works fine... ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user |
|
|
Re: ClamAV 0.92.1
by compdoc
::
Rate this Message:
You do need to use the new files or you can't run clamd or
freshclam. And I asked the wrong question. The file /etc/init.d/clamd differs. The newer one is larger. Ok to use the clamd file from 2.1.2 on 2.1? I'm going to test this... -----Original Message----- From: efw-user-bounces@... [mailto:efw-user-bounces@...] On Behalf Of compdoc Sent: Monday, July 07, 2008 5:47 PM To: efw-user@... Subject: [Efw-user] ClamAV 0.92.1 Ive gotten 0.92.1 working on a pair of ewf 2.1 servers, and also on a pair of 2.1.2 servers. There is a difference in size of the files clamd.conf and freshclam.conf between the two versions of efw, since they had different versions of clamav. (I'm pretty sure) The newer one is larger. I haven't taken the time to compare them, but is there any need to keep the older version around for 2.1? Anyone know off hand? ------------------------------------------------------------ ------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user |
|
|
Re: efw 2.1
by Mike Knisely
::
Rate this Message:
If you enable SSH, you should be able to use SCP w/out issue. I'm no
longer running any 2.1; however, I'm fairly certain I've used SCP with that version in the past. Mike K. -----Original Message----- From: efw-user-bounces@... [mailto:efw-user-bounces@...] On Behalf Of compdoc Sent: Monday, July 07, 2008 7:51 PM To: efw-user@... Subject: [Efw-user] efw 2.1 For 2.1, is it possible to enable secure file transfer? 2.1.2 works fine... ------------------------------------------------------------------------ - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user |
|
|
Re: efw 2.1
by compdoc
::
Rate this Message:
I think scp works from the command line, but I use the free
www.ssh.com client which does ssh, plus file transfer. Maybe it's not actually scp that its using. On a 2.1.2 server, the client opens both a file xfer window and a command line window. But with 2.1, only the command line can open. It's just an inconvenience, but it would be nice to be able to enable... -----Original Message----- From: efw-user-bounces@... [mailto:efw-user-bounces@...] On Behalf Of Mike Knisely Sent: Monday, July 14, 2008 10:02 PM To: efw-user@... Subject: Re: [Efw-user] efw 2.1 If you enable SSH, you should be able to use SCP w/out issue. I'm no longer running any 2.1; however, I'm fairly certain I've used SCP with that version in the past. Mike K. -----Original Message----- From: efw-user-bounces@... [mailto:efw-user-bounces@...] On Behalf Of compdoc Sent: Monday, July 07, 2008 7:51 PM To: efw-user@... Subject: [Efw-user] efw 2.1 For 2.1, is it possible to enable secure file transfer? 2.1.2 works fine... ------------------------------------------------------------ ------------ - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------ ------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user |
|
|
Re: efw 2.1
by Mike Knisely
::
Rate this Message:
I'm not familiar with that client.
I've used Filezilla (M$) or GFTP (*nix) as a graphical scp client in the past. I know it's not an answer to your issue, but I've had good luck with these clients. You might also look at sshfs. It's a way of mounting a remote directory over scp as though it were local to your system... pretty slick. Michael J. Knisely -----Original Message----- From: efw-user-bounces@... [mailto:efw-user-bounces@...] On Behalf Of compdoc Sent: Tuesday, July 15, 2008 12:14 AM To: efw-user@... Subject: Re: [Efw-user] efw 2.1 I think scp works from the command line, but I use the free www.ssh.com client which does ssh, plus file transfer. Maybe it's not actually scp that its using. On a 2.1.2 server, the client opens both a file xfer window and a command line window. But with 2.1, only the command line can open. It's just an inconvenience, but it would be nice to be able to enable... -----Original Message----- From: efw-user-bounces@... [mailto:efw-user-bounces@...] On Behalf Of Mike Knisely Sent: Monday, July 14, 2008 10:02 PM To: efw-user@... Subject: Re: [Efw-user] efw 2.1 If you enable SSH, you should be able to use SCP w/out issue. I'm no longer running any 2.1; however, I'm fairly certain I've used SCP with that version in the past. Mike K. -----Original Message----- From: efw-user-bounces@... [mailto:efw-user-bounces@...] On Behalf Of compdoc Sent: Monday, July 07, 2008 7:51 PM To: efw-user@... Subject: [Efw-user] efw 2.1 For 2.1, is it possible to enable secure file transfer? 2.1.2 works fine... ------------------------------------------------------------ ------------ - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------ ------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------ - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Efw-user mailing list Efw-user@... https://lists.sourceforge.net/lists/listinfo/efw-user |
| Free Forum Powered by Nabble | Forum Help |