Parsing ADT_A31 and ADT_A28 messages

[GHOPE1]

Hi folks,

I'm having problems transmitting and receiving a message of type ADT_A31. Here is the test message I'm trying to send:

         String msg = "MSH|^~\\&|RHAPSODY|HOEFT|Therapies|Therapies|2007080215381000000000||ADT^A31|26106430.1.1.1.1.1.1.1|P|2.3|||AL|ER||ASCII|\"\""
                      + "EVN|A31|2007080215381000000000"
                      + "PID||N427962|800427962^^^01||PATIENT^TEST^^^||19581208000000|M|||ADDR1^ADDR2^ADDR3^ADDR4^PCODE||111 1111^^PH|^^PH||2|C/E||4788311593|||Z||||||||0"
                      + "PD1|||M85038^^M85038^1~M85~038~01|G8510921"
                      + "PV1||1";

For some reason, when I try to transmit this message I get the message back:

"INFO: Instantiating msg of class ca.uhn.hl7v2.model.v23.message.ADT_A01"

and then all sorts of stuff like...

"INFO: Initiator received message: MSH|^~\&|||||20080318112940.601+0000||ACK|99|P|2.3
MSA|AE|26106430.1.1.1.1.1.1.1|Can't encode message: MSH-1 (field separator) is missing
ERR|^^^207&&hl70357&&Can't encode message: MSH-1 (field separator) is missing"

etc.

Shouldn't it be saying it's instantiating a message of type ADT_A31 instead? The same goes when I try to transmit an ADT_A28 message too.

The thing is, I'm transmitting and recieving messages of type OMG_019 and ORU-R01 fine. But these other two types I'm having really big problems with.

Any help would be much appreciated!

Cheers

Nick.

[VIOT Yves]

Hi,
Not sure but don't you have tried to remove the double "\" in your MSH-1  ?
Good luck

GHOPE1 a écrit :

> Hi folks,
>
> I'm having problems transmitting and receiving a message of type ADT_A31.
> Here is the test message I'm trying to send:
>
>          String msg =
> "MSH|^~\\&|RHAPSODY|HOEFT|Therapies|Therapies|2007080215381000000000||ADT^A31|26106430.1.1.1.1.1.1.1|P|2.3|||AL|ER||ASCII|\"\""
>                       + "EVN|A31|2007080215381000000000"
>                       +
> "PID||N427962|800427962^^^01||PATIENT^TEST^^^||19581208000000|M|||ADDR1^ADDR2^ADDR3^ADDR4^PCODE||111
> 1111^^PH|^^PH||2|C/E||4788311593|||Z||||||||0"
>                       + "PD1|||M85038^^M85038^1~M85~038~01|G8510921"
>                       + "PV1||1";
>
> For some reason, when I try to transmit this message I get the message back:
>
> "INFO: Instantiating msg of class ca.uhn.hl7v2.model.v23.message.ADT_A01"
>
> and then all sorts of stuff like...
>
> "INFO: Initiator received message:
> MSH|^~\&|||||20080318112940.601+0000||ACK|99|P|2.3
> MSA|AE|26106430.1.1.1.1.1.1.1|Can't encode message: MSH-1 (field separator)
> is missing
> ERR|^^^207&&hl70357&&Can't encode message: MSH-1 (field separator) is
> missing"
>
> etc.
>
> Shouldn't it be saying it's instantiating a message of type ADT_A31 instead?
> The same goes when I try to transmit an ADT_A28 message too.
>
> The thing is, I'm transmitting and recieving messages of type OMG_019 and
> ORU-R01 fine. But these other two types I'm having really big problems with.
>
> Any help would be much appreciated!
>
> Cheers
>
> Nick.
>  

--
Yves VIOT
C.S.I.S.
130 rue Eugene POTTIER
35200 RENNES
Mail       :yves.viot@...
T(Direct)  :0952-170-963 (non surtaxé)
T(Siège)   :02-23-35-43-55
F(Siège)   :02-23-35-43-56
________________
CONFIDENTIALITE : Ce message et les éventuelles pièces attachées sont confidentiels. Si vous n'êtes pas dans la liste des destinataires, veuillez informer l'expéditeur immédiatement et ne pas divulguer le contenu à une tierce personne, ne pas l'utiliser pour quelque raison que ce soit, ne pas stocker ou copier l'information qu'il contient sur un quelconque support.


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Hl7api-devel mailing list
Hl7api-devel@...
https://lists.sourceforge.net/lists/listinfo/hl7api-devel