I am having issues with a NetScreen ISG 2000 device. I have configured it to the point where I can ping each of the IP's on all of the interfaces assigned to the ISG 2000 device. I can even ping/telnet to the gateway on the other side of the ISG 2000. I cannot go further than the gateway. I am not running OSPF or any other routing protocols on the device. I do utiliaze a vlan on the internal side of the device. It seemingly works, as I can ping the gateway of the ISG. I can also ssh into the server behind the ISG 2000. There are some static routes on this device. Others have suggested it is my Policies (which is set to default-permit-all) or some route I am not setting properly. Do you have any ideas where the problem is without looking at our network diagram? I am not even sure if this is the proper place to ask about this. I am just totally stumped on this and never setup a device like this before.
_______________________________________________
nn mailing list
nn@...
http://www.compsoc.com/cgi-bin/mailman/listinfo/nn
