NetBSD-current on Acer Aspire One

[m0f0x-2]

Hello,

I'm testing NetBSD-current (4.99.72, cvs`ed on 10/01/2008) on my Acer
Aspire One netbook.

What works/is attached:
..> sound
..> wired network card (re)
..> wireless network card (ath), using lastest ath_hal (0.10.5.10) [1,2]
..> webcam (uvideo)

What doesn't work:
..> CPU identification, SpeedStep[3]
..> SD/MMC card reader

I'm a new NetBSD user, moving from FreeBSD. NetBSD seems to support
this kind of machine a little bit better, with great chance of
improvement.

Can someone point me directions to (try) to make SpeedStep work? I can
test patches or anything... Looking at some code of OpenBSD folks, Atom
CPUs are proper recognized and SpeedStep is working.

About the SD/MMC card reader, I've seen some patches. What is the
lastest patch to apply into the source tree? The card reader is a
JMicron device. Some patches say that Ricoh-based SD/MMC card readers
are supported, only.

If this helps, the dmesg[4] is also on this message. I'm not running
the GENERIC kernel, but if someone wants the dmesg from the GENERIC
kernel, just say so and I'll attach it.

Thanks in advance,
Thiago.

---
[1] ftp://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/ath-0.10.5.10.patch.gz
[2]
ftp://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/ath-0.10.5.10-ieee80211.patch

[3]:
cpu0: Intel Pentium Pro, II or III (686-class), 1596.14 MHz, id 0x106c2
cpu0: features
bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0:
features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX> cpu0: features
bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF> cpu0: features2
40c39d<SSE3,DTES64,MONITOR,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM> cpu0: "Intel
(R) Atom(TM) CPU N270   @ 1.60GHz" cpu0: I-cache 32KB 64B/line 8-way
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: SMT ID 0
cpu0: family 06 model 0c extfamily 00 extmodel 01

[4]:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005, 2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.72 (ATOM) #0: Tue Sep 30 13:26:06 BRT 2008
        root@...:/usr/obj/sys/arch/i386/compile/ATOM
total memory = 1523 MB
avail memory = 1492 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Acer AOA110 (1)
mainbus0 (root)
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c
cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x106c2
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu1 at mainbus0 apid 1: Intel 686-class, 1596MHz, id 0x106c2
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <INTEL ,Napa    ,00000001>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53
FWHD (INT0800) at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, PNP0F13): aux port
pckbc2: irq 12
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
WMID (PNP0C14) at acpi0 not configured
apm1 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27ac (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0x60000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27ae (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using
wskbd0 wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i945GME (unit 0)
i915drm0: AGP at 0x60000000 256MB
i915drm0: Initialized i915 1.5.0 20060119
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at
pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0:
Generic High Definition Audio Controller azalia0: interrupting at
ioapic0 pin 16 azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
10/100BaseTX (rev. 0x02) re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:1e:68:96:30:a7
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 14.2 phy 7.0 radio 10.2
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vendor 0x197b product 0x2382 (miscellaneous system) at pci4 dev 0
function 0 not configured vendor 0x197b product 0x2381 (SD Host
Controller system, interface 0x01) at pci4 dev 0 function 2 not
configured vendor 0x197b product 0x2383 (miscellaneous system) at pci4
dev 0 function 3 not configured vendor 0x197b product 0x2384
(miscellaneous system) at pci4 dev 0 function 4 not configured uhci0 at
pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02) uhci0:
interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at
pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02) uhci1:
interrupting at ioapic0 pin 17 usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev.
0x02) uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev.
0x02) uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev.
0x02) ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: HPET window not mapped, skipping
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev.
0x02) ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x51
spdmem0: DDR2 SDRAM memory, no parity or ECC, 1024MB, 666MHz, PC2-5300
spdmem0: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC268 (rev. 1.1), HDA
rev. 1.0 audio0 at azalia0: full duplex, independent
acpiacad0: AC adapter online.
: <P-SSD1800>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088
sectors uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev
1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1 uhub4: 8 ports with 8 removable, self powered
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
DMA) acpibat0: battery info: SIMPLO, LION, UM08A72 105B
acpibat0: battery info: SIMPLO, LION, UM08A72 105B
uvideo0 at uhub4 port 5 configuration 1 interface 0: Sonix Technology
Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 video0 at uvideo0:
Sonix Technology Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 pad0:
outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
ath0: device timeout (txq 1, txintrperiod 5)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005, 2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.72 (ATOM) #0: Tue Sep 30 13:26:06 BRT 2008
        root@...:/usr/obj/sys/arch/i386/compile/ATOM
total memory = 1523 MB
avail memory = 1492 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Acer AOA110 (1)
mainbus0 (root)
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c
cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x106c2
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu1 at mainbus0 apid 1: Intel 686-class, 1596MHz, id 0x106c2
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <INTEL ,Napa    ,00000001>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53
FWHD (INT0800) at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, PNP0F13): aux port
pckbc2: irq 12
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
WMID (PNP0C14) at acpi0 not configured
apm1 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27ac (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0x60000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27ae (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using
wskbd0 wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i945GME (unit 0)
i915drm0: AGP at 0x60000000 256MB
i915drm0: Initialized i915 1.5.0 20060119
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at
pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0:
Generic High Definition Audio Controller azalia0: interrupting at
ioapic0 pin 16 azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
10/100BaseTX (rev. 0x02) re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:1e:68:96:30:a7
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 14.2 phy 7.0 radio 10.2
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vendor 0x197b product 0x2382 (miscellaneous system) at pci4 dev 0
function 0 not configured vendor 0x197b product 0x2381 (SD Host
Controller system, interface 0x01) at pci4 dev 0 function 2 not
configured vendor 0x197b product 0x2383 (miscellaneous system) at pci4
dev 0 function 3 not configured vendor 0x197b product 0x2384
(miscellaneous system) at pci4 dev 0 function 4 not configured uhci0 at
pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02) uhci0:
interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at
pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02) uhci1:
interrupting at ioapic0 pin 17 usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev.
0x02) uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev.
0x02) uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev.
0x02) ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: HPET window not mapped, skipping
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev.
0x02) ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x51
spdmem0: DDR2 SDRAM memory, no parity or ECC, 1024MB, 666MHz, PC2-5300
spdmem0: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC268 (rev. 1.1), HDA
rev. 1.0 audio0 at azalia0: full duplex, independent
acpiacad0: AC adapter offline.
: <P-SSD1800>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088
sectors uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev
1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1 uhub4: 8 ports with 8 removable, self powered
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
DMA) acpibat0: battery info: SIMPLO, LION, UM08A72 105B
acpibat0: battery info: SIMPLO, LION, UM08A72 105B
uvideo0 at uhub4 port 5 configuration 1 interface 0: Sonix Technology
Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 video0 at uvideo0:
Sonix Technology Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 pad0:
outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

[Joerg Sonnenberger]

On Fri, Oct 03, 2008 at 12:01:27AM -0300, Thiago Luz Basilio wrote:
> What doesn't work:
> ..> CPU identification, SpeedStep[3]

Can you try to build a kernel with the attached patch? The BIOS might
have disabled EST.

Joerg

Index: identcpu.c
===================================================================
RCS file: /home/joerg/repo/netbsd/src/sys/arch/x86/x86/identcpu.c,v
retrieving revision 1.9
diff -u -p -r1.9 identcpu.c
--- identcpu.c 2 Jun 2008 14:41:41 -0000 1.9
+++ identcpu.c 3 Oct 2008 11:08:55 -0000
@@ -758,6 +758,8 @@ cpu_identify(struct cpu_info *ci)
  if (cpu_feature2 & CPUID2_EST) {
  if (rdmsr(MSR_MISC_ENABLE) & (1 << 16))
  est_init(cpu_vendor);
+ else
+ printf("EST disabled by BIOS\n");
  }
 #endif /* ENHANCED_SPEEDSTEP */
 

[Paul Goyette]

On Fri, 3 Oct 2008, Thiago Luz Basilio wrote:

> Hello,
>
> I'm testing NetBSD-current (4.99.72, cvs`ed on 10/01/2008) on my Acer
> Aspire One netbook.
>
> What works/is attached:
> ..> sound
> ..> wired network card (re)
> ..> wireless network card (ath), using lastest ath_hal (0.10.5.10) [1,2]
> ..> webcam (uvideo)
>
> What doesn't work:
> ..> CPU identification, SpeedStep[3]
> ..> SD/MMC card reader
>
> I'm a new NetBSD user, moving from FreeBSD. NetBSD seems to support
> this kind of machine a little bit better, with great chance of
> improvement.
>
> Can someone point me directions to (try) to make SpeedStep work? I can
> test patches or anything... Looking at some code of OpenBSD folks, Atom
> CPUs are proper recognized and SpeedStep is working.
>
> About the SD/MMC card reader, I've seen some patches. What is the
> lastest patch to apply into the source tree? The card reader is a
> JMicron device. Some patches say that Ricoh-based SD/MMC card readers
> are supported, only.

As of right now, the SD/MMC card reader stuff is unsupported.  There are
a couple efforts under way to add support, but so far they are not yet
ready.

>
> If this helps, the dmesg[4] is also on this message. I'm not running
> the GENERIC kernel, but if someone wants the dmesg from the GENERIC
> kernel, just say so and I'll attach it.
>
> Thanks in advance,
> Thiago.
>
> ---
> [1] ftp://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/ath-0.10.5.10.patch.gz
> [2]
> ftp://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/ath-0.10.5.10-ieee80211.patch
>
> [3]:
> cpu0: Intel Pentium Pro, II or III (686-class), 1596.14 MHz, id 0x106c2
> cpu0: features
> bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0:
> features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX> cpu0: features
> bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF> cpu0: features2
> 40c39d<SSE3,DTES64,MONITOR,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM> cpu0: "Intel
> (R) Atom(TM) CPU N270   @ 1.60GHz" cpu0: I-cache 32KB 64B/line 8-way
> cpu0: Initial APIC ID 0
> cpu0: Cluster/Package ID 0
> cpu0: SMT ID 0
> cpu0: family 06 model 0c extfamily 00 extmodel 01
>
> [4]:
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
> 2005, 2006, 2007, 2008
>    The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>    The Regents of the University of California.  All rights reserved.
>
> NetBSD 4.99.72 (ATOM) #0: Tue Sep 30 13:26:06 BRT 2008
> root@...:/usr/obj/sys/arch/i386/compile/ATOM
> total memory = 1523 MB
> avail memory = 1492 MB
> timecounter: Timecounters tick every 10.000 msec
> RTC BIOS diagnostic error 80<clock_battery>
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> Acer AOA110 (1)
> mainbus0 (root)
> pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800
> pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808
> pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810
> pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c
> cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x106c2
> cpu0: Intel(R) On Demand Clock Modulation (state disabled)
> cpu1 at mainbus0 apid 1: Intel 686-class, 1596MHz, id 0x106c2
> ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20080321
> acpi0: X/RSDT: OemId <INTEL ,Napa    ,00000001>, AslId <    ,01000013>
> acpi0: SCI interrupting at int 9
> acpi0: fixed-feature power button present
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> ACPI-Fast 24-bit timer
> acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
> acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
> acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery (Control Method)
> acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
> hpet0 at acpi0 (HPET, PNP0103)
> hpet0: mem 0xfed00000-0xfed003ff irq 0,8
> timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
> npx1 at acpi0 (FPU, PNP0C04)
> npx1: io 0xf0 irq 13
> npx1: reported by CPUID; using exception 16
> attimer1 at acpi0 (TIMR, PNP0100): AT Timer
> attimer1: io 0x40-0x43,0x50-0x53
> FWHD (INT0800) at acpi0 not configured
> pckbc1 at acpi0 (KBC, PNP0303): kbd port
> pckbc1: io 0x60,0x64 irq 1
> pckbc2 at acpi0 (MOUE, PNP0F13): aux port
> pckbc2: irq 12
> acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
> acpiec0: io 0x62,0x66
> WMID (PNP0C14) at acpi0 not configured
> apm1 at acpi0: Power Management spec V1.2
> pckbd0 at pckbc1 (kbd slot)
> pckbc1: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc1 (aux slot)
> pms0: Synaptics touchpad version 7.2
> pms0: Palm detect
> pckbc1: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: vendor 0x8086 product 0x27ac (rev. 0x03)
> agp0 at pchb0: detected 7932k stolen memory
> agp0: aperture at 0x60000000, size 0x10000000
> vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27ae (rev. 0x03)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using
> wskbd0 wsmux1: connecting to wsdisplay0
> i915drm0 at vga1: Intel i945GME (unit 0)
> i915drm0: AGP at 0x60000000 256MB
> i915drm0: Initialized i915 1.5.0 20060119
> vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at
> pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0:
> Generic High Definition Audio Controller azalia0: interrupting at
> ioapic0 pin 16 azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
> ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled
> re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
> 10/100BaseTX (rev. 0x02) re0: interrupting at ioapic0 pin 17
> re0: Ethernet address 00:1e:68:96:30:a7
> re0: using 256 tx descriptors
> rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled
> ath0 at pci3 dev 0 function 0
> ath0: interrupting at ioapic0 pin 18
> ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 14.2 phy 7.0 radio 10.2
> ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
> pci4 at ppb3 bus 4
> pci4: i/o space, memory space enabled
> vendor 0x197b product 0x2382 (miscellaneous system) at pci4 dev 0
> function 0 not configured vendor 0x197b product 0x2381 (SD Host
> Controller system, interface 0x01) at pci4 dev 0 function 2 not
> configured vendor 0x197b product 0x2383 (miscellaneous system) at pci4
> dev 0 function 3 not configured vendor 0x197b product 0x2384
> (miscellaneous system) at pci4 dev 0 function 4 not configured uhci0 at
> pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02) uhci0:
> interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at
> pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02) uhci1:
> interrupting at ioapic0 pin 17 usb1 at uhci1: USB revision 1.0
> uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev.
> 0x02) uhci2: interrupting at ioapic0 pin 18
> usb2 at uhci2: USB revision 1.0
> uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev.
> 0x02) uhci3: interrupting at ioapic0 pin 19
> usb3 at uhci3: USB revision 1.0
> ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev.
> 0x02) ehci0: interrupting at ioapic0 pin 16
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
> usb4 at ehci0: USB revision 2.0
> ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
> pci5 at ppb4 bus 5
> pci5: i/o space, memory space enabled
> ichlpcib0 at pci0 dev 31 function 0
> ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
> timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
> ichlpcib0: 24-bit timer
> ichlpcib0: TCO (watchdog) timer configured.
> ichlpcib0: HPET window not mapped, skipping
> piixide0 at pci0 dev 31 function 2
> piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
> piixide0: bus-master DMA support present
> piixide0: primary channel wired to compatibility mode
> piixide0: primary channel interrupting at ioapic0 pin 14
> atabus0 at piixide0 channel 0
> piixide0: secondary channel wired to compatibility mode
> piixide0: secondary channel interrupting at ioapic0 pin 15
> atabus1 at piixide0 channel 1
> ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev.
> 0x02) ichsmb0: interrupting at ioapic0 pin 17
> iic0 at ichsmb0: I2C bus
> spdmem0 at iic0 addr 0x51
> spdmem0: DDR2 SDRAM memory, no parity or ECC, 1024MB, 666MHz, PC2-5300
> spdmem0: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time
> spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15
> spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
> isa0 at ichlpcib0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> attimer1: attached to pcppi0
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC268 (rev. 1.1), HDA
> rev. 1.0 audio0 at azalia0: full duplex, independent
> acpiacad0: AC adapter online.
> : <P-SSD1800>
> wd0: drive supports 1-sector PIO transfers, LBA addressing
> wd0: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088
> sectors uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev
> 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1 uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1 uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1 uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00,
> addr 1 uhub4: 8 ports with 8 removable, self powered
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
> DMA) acpibat0: battery info: SIMPLO, LION, UM08A72 105B
> acpibat0: battery info: SIMPLO, LION, UM08A72 105B
> uvideo0 at uhub4 port 5 configuration 1 interface 0: Sonix Technology
> Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 video0 at uvideo0:
> Sonix Technology Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 pad0:
> outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> ath0: device timeout (txq 1, txintrperiod 5)
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
> 2005, 2006, 2007, 2008
>    The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>    The Regents of the University of California.  All rights reserved.
>
> NetBSD 4.99.72 (ATOM) #0: Tue Sep 30 13:26:06 BRT 2008
> root@...:/usr/obj/sys/arch/i386/compile/ATOM
> total memory = 1523 MB
> avail memory = 1492 MB
> timecounter: Timecounters tick every 10.000 msec
> RTC BIOS diagnostic error 80<clock_battery>
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> Acer AOA110 (1)
> mainbus0 (root)
> pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800
> pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808
> pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810
> pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c
> cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x106c2
> cpu0: Intel(R) On Demand Clock Modulation (state disabled)
> cpu1 at mainbus0 apid 1: Intel 686-class, 1596MHz, id 0x106c2
> ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20080321
> acpi0: X/RSDT: OemId <INTEL ,Napa    ,00000001>, AslId <    ,01000013>
> acpi0: SCI interrupting at int 9
> acpi0: fixed-feature power button present
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> ACPI-Fast 24-bit timer
> acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
> acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
> acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery (Control Method)
> acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
> hpet0 at acpi0 (HPET, PNP0103)
> hpet0: mem 0xfed00000-0xfed003ff irq 0,8
> timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
> npx1 at acpi0 (FPU, PNP0C04)
> npx1: io 0xf0 irq 13
> npx1: reported by CPUID; using exception 16
> attimer1 at acpi0 (TIMR, PNP0100): AT Timer
> attimer1: io 0x40-0x43,0x50-0x53
> FWHD (INT0800) at acpi0 not configured
> pckbc1 at acpi0 (KBC, PNP0303): kbd port
> pckbc1: io 0x60,0x64 irq 1
> pckbc2 at acpi0 (MOUE, PNP0F13): aux port
> pckbc2: irq 12
> acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
> acpiec0: io 0x62,0x66
> WMID (PNP0C14) at acpi0 not configured
> apm1 at acpi0: Power Management spec V1.2
> pckbd0 at pckbc1 (kbd slot)
> pckbc1: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc1 (aux slot)
> pms0: Synaptics touchpad version 7.2
> pms0: Palm detect
> pckbc1: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: vendor 0x8086 product 0x27ac (rev. 0x03)
> agp0 at pchb0: detected 7932k stolen memory
> agp0: aperture at 0x60000000, size 0x10000000
> vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27ae (rev. 0x03)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using
> wskbd0 wsmux1: connecting to wsdisplay0
> i915drm0 at vga1: Intel i945GME (unit 0)
> i915drm0: AGP at 0x60000000 256MB
> i915drm0: Initialized i915 1.5.0 20060119
> vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at
> pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0:
> Generic High Definition Audio Controller azalia0: interrupting at
> ioapic0 pin 16 azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
> ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled
> re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
> 10/100BaseTX (rev. 0x02) re0: interrupting at ioapic0 pin 17
> re0: Ethernet address 00:1e:68:96:30:a7
> re0: using 256 tx descriptors
> rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled
> ath0 at pci3 dev 0 function 0
> ath0: interrupting at ioapic0 pin 18
> ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 14.2 phy 7.0 radio 10.2
> ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
> pci4 at ppb3 bus 4
> pci4: i/o space, memory space enabled
> vendor 0x197b product 0x2382 (miscellaneous system) at pci4 dev 0
> function 0 not configured vendor 0x197b product 0x2381 (SD Host
> Controller system, interface 0x01) at pci4 dev 0 function 2 not
> configured vendor 0x197b product 0x2383 (miscellaneous system) at pci4
> dev 0 function 3 not configured vendor 0x197b product 0x2384
> (miscellaneous system) at pci4 dev 0 function 4 not configured uhci0 at
> pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02) uhci0:
> interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at
> pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02) uhci1:
> interrupting at ioapic0 pin 17 usb1 at uhci1: USB revision 1.0
> uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev.
> 0x02) uhci2: interrupting at ioapic0 pin 18
> usb2 at uhci2: USB revision 1.0
> uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev.
> 0x02) uhci3: interrupting at ioapic0 pin 19
> usb3 at uhci3: USB revision 1.0
> ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev.
> 0x02) ehci0: interrupting at ioapic0 pin 16
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
> usb4 at ehci0: USB revision 2.0
> ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
> pci5 at ppb4 bus 5
> pci5: i/o space, memory space enabled
> ichlpcib0 at pci0 dev 31 function 0
> ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
> timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
> ichlpcib0: 24-bit timer
> ichlpcib0: TCO (watchdog) timer configured.
> ichlpcib0: HPET window not mapped, skipping
> piixide0 at pci0 dev 31 function 2
> piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
> piixide0: bus-master DMA support present
> piixide0: primary channel wired to compatibility mode
> piixide0: primary channel interrupting at ioapic0 pin 14
> atabus0 at piixide0 channel 0
> piixide0: secondary channel wired to compatibility mode
> piixide0: secondary channel interrupting at ioapic0 pin 15
> atabus1 at piixide0 channel 1
> ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev.
> 0x02) ichsmb0: interrupting at ioapic0 pin 17
> iic0 at ichsmb0: I2C bus
> spdmem0 at iic0 addr 0x51
> spdmem0: DDR2 SDRAM memory, no parity or ECC, 1024MB, 666MHz, PC2-5300
> spdmem0: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time
> spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15
> spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
> isa0 at ichlpcib0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> attimer1: attached to pcppi0
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC268 (rev. 1.1), HDA
> rev. 1.0 audio0 at azalia0: full duplex, independent
> acpiacad0: AC adapter offline.
> : <P-SSD1800>
> wd0: drive supports 1-sector PIO transfers, LBA addressing
> wd0: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088
> sectors uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev
> 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1 uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1 uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1 uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00,
> addr 1 uhub4: 8 ports with 8 removable, self powered
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
> DMA) acpibat0: battery info: SIMPLO, LION, UM08A72 105B
> acpibat0: battery info: SIMPLO, LION, UM08A72 105B
> uvideo0 at uhub4 port 5 configuration 1 interface 0: Sonix Technology
> Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 video0 at uvideo0:
> Sonix Technology Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 pad0:
> outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
>
>
> !DSPAM:48e5a8091728417651846!
>
>
>

----------------------------------------------------------------------
|   Paul Goyette   | PGP DSS Key fingerprint: |  E-mail addresses:   |
| Customer Service | FA29 0E3B 35AF E8AE 6651 |  paul@...   |
| Network Engineer | 0786 F758 55DE 53BA 7731 | pgoyette@... |
----------------------------------------------------------------------

[Jared D. McNeill]

On Fri, 3 Oct 2008, Thiago Luz Basilio wrote:
> What doesn't work:
> ..> CPU identification, SpeedStep[3]

What does 'cpuctl cpu0 identify' say? CPU identification code has been
moved out of the kernel in -current.

Cheers,
Jared

[Jared D. McNeill]

On Fri, 3 Oct 2008, Jared D. McNeill wrote:
> On Fri, 3 Oct 2008, Thiago Luz Basilio wrote:
>> What doesn't work:
>> ..> CPU identification, SpeedStep[3]
>
> What does 'cpuctl cpu0 identify' say? CPU identification code has been moved
> out of the kernel in -current.

Sorry, 'cpuctl identify 0'.

Cheers,
Jared

[m0f0x-2]

Hello Jared,

# cpuctl cpu0 identify
cpu0: Intel Pentium Pro, II or III (686-class), 1596.14 MHz, id 0x106c2
cpu0: features
bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0:
features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX> cpu0: features
bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF> cpu0: features2
40c39d<SSE3,DTES64,MONITOR,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM> cpu0: "Intel
(R) Atom(TM) CPU N270   @ 1.60GHz" cpu0: I-cache 32KB 64B/line 8-way
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: SMT ID 0
cpu0: family 06 model 0c extfamily 00 extmodel 01

TIA,
Thiago.

On Fri, 3 Oct 2008 08:24:39 -0400 (EDT)
"Jared D. McNeill" <jmcneill@...> wrote:

> On Fri, 3 Oct 2008, Thiago Luz Basilio wrote:
> > What doesn't work:
> > ..> CPU identification, SpeedStep[3]
>
> What does 'cpuctl cpu0 identify' say? CPU identification code has
> been moved out of the kernel in -current.
>
> Cheers,
> Jared

[m0f0x-2]

Joerg,

Below is the dmesg of a recently built GENERIC kernel with the patch
applied:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005, 2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.72 (GENERIC) #1: Fri Oct  3 15:31:01 BRT 2008
        root@:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 1523 MB
avail memory = 1486 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Acer AOA110 (1)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x106c2
cpu1 at mainbus0 apid 1: Intel 686-class, 1596MHz, id 0x106c2
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <INTEL ,Napa    ,00000001>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53
FWHD (INT0800) at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, PNP0F13): aux port
pckbc2: irq 12
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
WMID (PNP0C14) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27ac (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0x60000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27ae (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using
wskbd0 wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at
pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0:
Generic High Definition Audio Controller azalia0: interrupting at
ioapic0 pin 16 azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
10/100BaseTX (rev. 0x02) re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:1e:68:96:30:a7
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 14.2 phy 7.0 radio 10.2
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vendor 0x197b product 0x2382 (miscellaneous system) at pci4 dev 0
function 0 not configured vendor 0x197b product 0x2381 (SD Host
Controller system, interface 0x01) at pci4 dev 0 function 2 not
configured vendor 0x197b product 0x2383 (miscellaneous system) at pci4
dev 0 function 3 not configured vendor 0x197b product 0x2384
(miscellaneous system) at pci4 dev 0 function 4 not configured uhci0 at
pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02) uhci0:
interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at
pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02) uhci1:
interrupting at ioapic0 pin 17 usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev.
0x02) uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev.
0x02) uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev.
0x02) ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev.
0x02) ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Realtek ALC268 (rev. 1.1), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
acpiacad0: AC adapter online.
wd0 at atabus1 drive 0: <P-SSD1800>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088
sectors uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev
1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1 uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1 uhub4: 8 ports with 8 removable, self powered
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
DMA) uvideo0 at uhub4 port 5 configuration 1 interface 0: Sonix
Technology Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr 2 video0 at
uvideo0: Sonix Technology Co., Ltd. USB 2.0 Camera, rev 2.00/1.00, addr
2 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

TIA,
Thiago.

On Fri, 3 Oct 2008 13:10:51 +0200
Joerg Sonnenberger <joerg@...> wrote:

> On Fri, Oct 03, 2008 at 12:01:27AM -0300, Thiago Luz Basilio wrote:
> > What doesn't work:
> > ..> CPU identification, SpeedStep[3]
>
> Can you try to build a kernel with the attached patch? The BIOS might
> have disabled EST.
>
> Joerg
>