|

»

»

NanoBSD Image

View: New views

11 Messages — Rating Filter: Alert me

	NanoBSD Image by David N-2 :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Hi, I'm just wondering if its possible to mount the _.disk.full or _.disk.image? Also, is it possible to dd the images to a slice or partition on a HDD as i dont have any Memory Cards to test it on at the moment. such as dd if=_.disk.image of=/dev/ads2 bs=64k Cheers David _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by Suken Woo :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message David N Wrote: > Hi, > > I'm just wondering if its possible to mount the _.disk.full or > _.disk.image? > > Also, is it possible to dd the images to a slice or partition on a HDD > as i dont have any Memory Cards to test it on at the moment. > > such as > dd if=_.disk.image of=/dev/ads2 bs=64k > > Cheers > David > _______________________________________________ > freebsd-small@... mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-small > To unsubscribe, send any mail to "freebsd-small-unsubscribe@..." > of course you can _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by Mathieu Arnold :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message +-Le 24/04/07 14:17 +1000, David N a dit : \| Hi, \| \| I'm just wondering if its possible to mount the _.disk.full or \| _.disk.image? Yes, just use mdconfig, something like mdconfig -a -t vnode -f _.disk.full, you'll have a /dev/mdX with it in. \| Also, is it possible to dd the images to a slice or partition on a HDD \| as i dont have any Memory Cards to test it on at the moment. \| \| such as \| dd if=_.disk.image of=/dev/ads2 bs=64k You can, but you'll loose a lot of space :) -- Mathieu Arnold _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by David N-2 :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On 24/04/07, Mathieu Arnold <mat@...> wrote: > +-Le 24/04/07 14:17 +1000, David N a dit : > \| Hi, > \| > \| I'm just wondering if its possible to mount the _.disk.full or > \| _.disk.image? > > Yes, just use mdconfig, something like mdconfig -a -t vnode -f _.disk.full, > you'll have a /dev/mdX with it in. > > \| Also, is it possible to dd the images to a slice or partition on a HDD > \| as i dont have any Memory Cards to test it on at the moment. > \| > \| such as > \| dd if=_.disk.image of=/dev/ads2 bs=64k > > You can, but you'll loose a lot of space :) > > -- > Mathieu Arnold > Thanks Mathieu, the mdconfig worked =) For the hdd dd if=_.disk.image of=/dev/ad0s2 bs=64k worked but had to modify the /etc/fstab of the image and create a /dev/ad0s3 and newfs it for the /cfg. But works great =) David _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by David N-2 :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On 25/04/07, David N <davidn04@...> wrote: > On 24/04/07, Mathieu Arnold <mat@...> wrote: > > +-Le 24/04/07 14:17 +1000, David N a dit : > > \| Hi, > > \| > > \| I'm just wondering if its possible to mount the _.disk.full or > > \| _.disk.image? > > > > Yes, just use mdconfig, something like mdconfig -a -t vnode -f _.disk.full, > > you'll have a /dev/mdX with it in. > > > > \| Also, is it possible to dd the images to a slice or partition on a HDD > > \| as i dont have any Memory Cards to test it on at the moment. > > \| > > \| such as > > \| dd if=_.disk.image of=/dev/ads2 bs=64k > > > > You can, but you'll loose a lot of space :) > > > > -- > > Mathieu Arnold > > > > Thanks Mathieu, the mdconfig worked =) > > For the hdd > dd if=_.disk.image of=/dev/ad0s2 bs=64k worked but had to modify the > /etc/fstab of the image and create a /dev/ad0s3 and newfs it for the > /cfg. But works great =) > > David > Hello again, I've got the thing running, but the images are 256MB but I've only managed to get the "used" space down to around 80MB. I was hoping is there anything in the configuration file to get it down to bare bones and slowly add things in. Is it possible to get it down to pretty much a kernel + shell? My config file is NANO_NAME=custom NANO_SRC=/usr/src NANO_KERNEL=GENERIC NANO_IMAGES=2 CONF_BUILD=' NO_KLDLOAD=YES NO_NETGRAPH=YES NO_BIND_LIBS_LWRES=YES ' CONF_INSTALL=' NO_ATM=YES NO_BLUETOOTH=YES NO_FORTH=YES NO_GDB=YES NO_INFO=YES NO_MAILWRAPPER=YES NO_MAN=YES NO_NLS=YES NO_NLS_CATALOGS=YES NO_RCS=YES NO_SENDMAIL=YES NO_TOOLCHAIN=YES ' CONF_WORLD=' NO_ACPI=YES NO_AUDIT=YES NO_AUTHPF=YES NO_BIND=YES NO_BIND_DNSSEC=YES NO_BIND_ETC=YES NO_BIND_NAMED=YES NO_CALENDAR=YES NO_CPP=YES NO_CRYPT=YES NO_CVS=YES NO_CXX=YES NO_DICT=YES NO_DYNAMICROOT=YES NO_EXAMPLES=YES NO_FORTRAN=YES NO_FP_LIBC=YES NO_GAMES=YES NO_GCOV=YES NO_GNU=YES NO_GNU_SUPPORT=YES NO_GPIB=YES NO_GROFF=YES NO_HTML=YES NO_I4B=YES NO_INET6=YES NO_INET6_SUPPORT=YES NO_IPFILTER=YES NO_IPX=YES NO_IPX_SUPPORT=YES NO_KERBEROS=YES NO_KERBEROS_SUPPORT=YES NO_LOCALES=YES NO_LPR=YES NO_MODULES=YES NO_NCP=YES NO_NETCAT=YES NO_NIS=YES NO_OBJC=YES NO_OPENSSH=YES NO_OPENSSL=YES NO_PAM=YES NO_PAM_SUPPORT=YES NO_PCVT=YES NO_PF=YES NO_RESCUE=YES NO_SYSCONS=YES NO_WPA_SUPPLICANT_EAPOL=YES ' Cheers David _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by Mathieu Arnold :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message +-le 25.04.2007 19:18:19 +1000, David N a dit : \| On 25/04/07, David N <davidn04@...> wrote: \|> On 24/04/07, Mathieu Arnold <mat@...> wrote: \|> > +-Le 24/04/07 14:17 +1000, David N a dit : \|> > \| Hi, \|> > \| \|> > \| I'm just wondering if its possible to mount the _.disk.full or \|> > \| _.disk.image? \|> > \|> > Yes, just use mdconfig, something like mdconfig -a -t vnode -f \|> > _.disk.full, you'll have a /dev/mdX with it in. \|> > \|> > \| Also, is it possible to dd the images to a slice or partition on a HDD \|> > \| as i dont have any Memory Cards to test it on at the moment. \|> > \| \|> > \| such as \|> > \| dd if=_.disk.image of=/dev/ads2 bs=64k \|> > \|> > You can, but you'll loose a lot of space :) \|> > \|> > -- \|> > Mathieu Arnold \|> > \|> \|> Thanks Mathieu, the mdconfig worked =) \|> \|> For the hdd \|> dd if=_.disk.image of=/dev/ad0s2 bs=64k worked but had to modify the \|> /etc/fstab of the image and create a /dev/ad0s3 and newfs it for the \|> /cfg. But works great =) \|> \|> David \|> \| Hello again, \| \| I've got the thing running, but the images are 256MB but I've only \| managed to get the "used" space down to around 80MB. \| \| I was hoping is there anything in the configuration file to get it \| down to bare bones and slowly add things in. Is it possible to get it \| down to pretty much a kernel + shell? \| \| My config file is Mine is (it was for a 6.1-PRERELEASE though) NANO_NAME=soekris64 NANO_SRC=/usr/src NANO_TOOLS=tools/tools/nanobsd CONF_BUILD=' ' CONF_INSTALL=' NO_INSTALLLIB= NO_TOOLCHAIN= ' CONF_WORLD=' CPUTYPE=i486 CFLAGS=-O -pipe NO_ACPI= NO_ATM= NO_BIND_DNSSEC= NO_BLUETOOTH= NO_CALENDAR= NO_CVS= NO_CXX= NO_DICT= NO_EXAMPLES= NO_FORTRAN= NO_GAMES= NO_GCOV= NO_GDB= NO_GPIB= NO_GROFF=YES NO_HESIOD_LIBC= NO_HTML= NO_I4B= NO_INFO= NO_IPFILTER= NO_IPX=YES NO_KERBEROS= NO_LIBC_R= NO_LIBTHR= NO_LOCALES= NO_LPR= NO_MAKE= NO_MAN= NO_MAN=YES NO_MISC= NO_MODULES= NO_NIS= NO_NLS= NO_NLS=YES NO_OBJC= NO_P1003_1B= NO_PAM= NO_PCVT=YES NO_PROFILE= NO_RCMDS= NO_RESCUE= NO_SENDMAIL= NO_SHARE= NO_SHAREDOCS= NO_SYSCONS= NO_TCSH= PPP_NO_ATM= PPP_NO_I4B= PPP_NO_PAM= PPP_NO_RADIUS= MAKE_IDEA= LOADER_TFTP_SUPPORT=YES ' NANO_KERNEL=SOEKRIS NANO_CUSTOMIZE="" NANO_NEWFS="-b 4096 -f 512 -i 8192 -O2 -U -m 0" NANO_DRIVE=ad0 FlashDevice Soekris 64 NANO_IMAGES=1 NANO_CODESIZE=0 NANO_CONFSIZE=$((1024/51210242)) # 2 M NANO_DATASIZE=0 customize_cmd cust_comconsole customize_cmd cust_allow_ssh_root customize_cmd cust_install_files mat_pkg () ( mkdir -p ${NANO_WORLDDIR}/Pkg cp -r /usr/src/tools/tools/nanobsd/Pkg/* ${NANO_WORLDDIR}/Pkg chroot ${NANO_WORLDDIR} sh -c 'pkg_add -v -p /usr/local Pkg/All/*' rm -rf ${NANO_WORLDDIR}/Pkg ) customize_cmd mat_pkg mat_ssh () ( mkdir -p ${NANO_WORLDDIR}/root/.ssh install -o root -g wheel -m 0600 /home/mat/.ssh/authorized_keys ${NANO_WORLDDIR}/root/.ssh ) customize_cmd mat_ssh mat_root () ( chroot ${NANO_WORLDDIR} chpass -p '$1$foobar' -s /usr/local/bin/bash root ) customize_cmd mat_root mat_comconsole () ( # Enable getty on console sed -i "" -e /ttyd0/s/off/on/ ${NANO_WORLDDIR}/etc/ttys # Disable getty on syscons devices sed -i "" -e '/^ttyv[0-8]/s/ on/ off/' ${NANO_WORLDDIR}/etc/ttys # Tell loader to use serial console early. echo " -h" > ${NANO_WORLDDIR}/boot.config ) customize_cmd mat_comconsole The resulting fits on a 64Mo flash : /dev/ad0s1a 57M 52M 4.7M 92% / /dev/ad0s3 1.8M 116K 1.7M 6% /cfg I was planning to upgrade my soekris to 6.2, I'll try to see if it still fits :) My SOEKRIS kernel contains the following : machine i386 cpu I486_CPU ident SOEKRIS options SCHED_4BSD options PREEMPTION options INET options INET6 options FFS options SOFTUPDATES options MD_ROOT options NFSCLIENT options NFS_ROOT options PROCFS options PSEUDOFS options GEOM_GPT options COMPAT_43 options COMPAT_FREEBSD4 options COMPAT_FREEBSD5 options SCSI_DELAY=5000 options KTRACE options SYSVSHM options SYSVMSG options SYSVSEM options _KPOSIX_PRIORITY_SCHEDULING options KBD_INSTALL_CDEV options AHC_REG_PRETTY_PRINT options AHD_REG_PRETTY_PRINT options ADAPTIVE_GIANT device apic device eisa device pci device ata device atadisk options ATA_STATIC_ID device pmtimer device sio device miibus device sis device loop device random device ether device sl device ppp device tun device pty device md device gif device bpf options CPU_ELAN options CPU_ELAN_PPS options CPU_SOEKRIS options CONSPEED=19200 options INCLUDE_CONFIG_FILE device pf device carp device pflog device pfsync device vlan device tap device gre device if_bridge options PPP_BSDCOMP options PPP_DEFLATE options PPP_FILTER options FAST_IPSEC options TCP_SIGNATURE device crypto device cryptodev options ALTQ options ALTQ_HFSC options ALTQ_CBQ options ZERO_COPY_SOCKETS options HZ=1000 options PPS_SYNC options NO_SWAPPING options DEVICE_POLLING options SMBFS options NETSMB options NETSMBCRYPTO options ALTQ options ALTQ_CBQ options ALTQ_RED options ALTQ_RIO options ALTQ_HFSC options LIBICONV options LIBMCHAIN -- Mathieu Arnold _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by David N-2 :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On 25/04/07, Mathieu Arnold <mat@...> wrote: > +-le 25.04.2007 19:18:19 +1000, David N a dit : > \| On 25/04/07, David N <davidn04@...> wrote: > \|> On 24/04/07, Mathieu Arnold <mat@...> wrote: > \|> > +-Le 24/04/07 14:17 +1000, David N a dit : > \|> > \| Hi, > \|> > \| > \|> > \| I'm just wondering if its possible to mount the _.disk.full or > \|> > \| _.disk.image? > \|> > > \|> > Yes, just use mdconfig, something like mdconfig -a -t vnode -f > \|> > _.disk.full, you'll have a /dev/mdX with it in. > \|> > > \|> > \| Also, is it possible to dd the images to a slice or partition on a HDD > \|> > \| as i dont have any Memory Cards to test it on at the moment. > \|> > \| > \|> > \| such as > \|> > \| dd if=_.disk.image of=/dev/ads2 bs=64k > \|> > > \|> > You can, but you'll loose a lot of space :) > \|> > > \|> > -- > \|> > Mathieu Arnold > \|> > > \|> > \|> Thanks Mathieu, the mdconfig worked =) > \|> > \|> For the hdd > \|> dd if=_.disk.image of=/dev/ad0s2 bs=64k worked but had to modify the > \|> /etc/fstab of the image and create a /dev/ad0s3 and newfs it for the > \|> /cfg. But works great =) > \|> > \|> David > \|> > \| Hello again, > \| > \| I've got the thing running, but the images are 256MB but I've only > \| managed to get the "used" space down to around 80MB. > \| > \| I was hoping is there anything in the configuration file to get it > \| down to bare bones and slowly add things in. Is it possible to get it > \| down to pretty much a kernel + shell? > \| > \| My config file is > > Mine is (it was for a 6.1-PRERELEASE though) > > NANO_NAME=soekris64 > NANO_SRC=/usr/src > NANO_TOOLS=tools/tools/nanobsd > CONF_BUILD=' > ' > CONF_INSTALL=' > NO_INSTALLLIB= > NO_TOOLCHAIN= > ' > > CONF_WORLD=' > CPUTYPE=i486 > CFLAGS=-O -pipe > NO_ACPI= > NO_ATM= > NO_BIND_DNSSEC= > NO_BLUETOOTH= > NO_CALENDAR= > NO_CVS= > NO_CXX= > NO_DICT= > NO_EXAMPLES= > NO_FORTRAN= > NO_GAMES= > NO_GCOV= > NO_GDB= > NO_GPIB= > NO_GROFF=YES > NO_HESIOD_LIBC= > NO_HTML= > NO_I4B= > NO_INFO= > NO_IPFILTER= > NO_IPX=YES > NO_KERBEROS= > NO_LIBC_R= > NO_LIBTHR= > NO_LOCALES= > NO_LPR= > NO_MAKE= > NO_MAN= > NO_MAN=YES > NO_MISC= > NO_MODULES= > NO_NIS= > NO_NLS= > NO_NLS=YES > NO_OBJC= > NO_P1003_1B= > NO_PAM= > NO_PCVT=YES > NO_PROFILE= > NO_RCMDS= > NO_RESCUE= > NO_SENDMAIL= > NO_SHARE= > NO_SHAREDOCS= > NO_SYSCONS= > NO_TCSH= > PPP_NO_ATM= > PPP_NO_I4B= > PPP_NO_PAM= > PPP_NO_RADIUS= > MAKE_IDEA= > LOADER_TFTP_SUPPORT=YES > ' > > NANO_KERNEL=SOEKRIS > NANO_CUSTOMIZE="" > NANO_NEWFS="-b 4096 -f 512 -i 8192 -O2 -U -m 0" > NANO_DRIVE=ad0 > FlashDevice Soekris 64 > NANO_IMAGES=1 > NANO_CODESIZE=0 > NANO_CONFSIZE=$((1024/51210242)) # 2 M > NANO_DATASIZE=0 > customize_cmd cust_comconsole > customize_cmd cust_allow_ssh_root > customize_cmd cust_install_files > > mat_pkg () ( > mkdir -p ${NANO_WORLDDIR}/Pkg > cp -r /usr/src/tools/tools/nanobsd/Pkg/* ${NANO_WORLDDIR}/Pkg > chroot ${NANO_WORLDDIR} sh -c 'pkg_add -v -p /usr/local Pkg/All/*' > rm -rf ${NANO_WORLDDIR}/Pkg > ) > > customize_cmd mat_pkg > > mat_ssh () ( > mkdir -p ${NANO_WORLDDIR}/root/.ssh > install -o root -g wheel -m 0600 /home/mat/.ssh/authorized_keys > ${NANO_WORLDDIR}/root/.ssh > ) > > customize_cmd mat_ssh > > mat_root () ( > chroot ${NANO_WORLDDIR} chpass -p '$1$foobar' -s /usr/local/bin/bash > root > ) > > customize_cmd mat_root > > mat_comconsole () ( > # Enable getty on console > sed -i "" -e /ttyd0/s/off/on/ ${NANO_WORLDDIR}/etc/ttys > > # Disable getty on syscons devices > sed -i "" -e '/^ttyv[0-8]/s/ on/ off/' > ${NANO_WORLDDIR}/etc/ttys > > # Tell loader to use serial console early. > echo " -h" > ${NANO_WORLDDIR}/boot.config > ) > > customize_cmd mat_comconsole > > The resulting fits on a 64Mo flash : > /dev/ad0s1a 57M 52M 4.7M 92% / > /dev/ad0s3 1.8M 116K 1.7M 6% /cfg > > I was planning to upgrade my soekris to 6.2, I'll try to see if it still fits > :) > > My SOEKRIS kernel contains the following : > > machine i386 > cpu I486_CPU > ident SOEKRIS > options SCHED_4BSD > options PREEMPTION > options INET > options INET6 > options FFS > options SOFTUPDATES > options MD_ROOT > options NFSCLIENT > options NFS_ROOT > options PROCFS > options PSEUDOFS > options GEOM_GPT > options COMPAT_43 > options COMPAT_FREEBSD4 > options COMPAT_FREEBSD5 > options SCSI_DELAY=5000 > options KTRACE > options SYSVSHM > options SYSVMSG > options SYSVSEM > options _KPOSIX_PRIORITY_SCHEDULING > options KBD_INSTALL_CDEV > options AHC_REG_PRETTY_PRINT > options AHD_REG_PRETTY_PRINT > options ADAPTIVE_GIANT > device apic > device eisa > device pci > device ata > device atadisk > options ATA_STATIC_ID > device pmtimer > device sio > device miibus > device sis > device loop > device random > device ether > device sl > device ppp > device tun > device pty > device md > device gif > device bpf > options CPU_ELAN > options CPU_ELAN_PPS > options CPU_SOEKRIS > options CONSPEED=19200 > options INCLUDE_CONFIG_FILE > device pf > device carp > device pflog > device pfsync > device vlan > device tap > device gre > device if_bridge > options PPP_BSDCOMP > options PPP_DEFLATE > options PPP_FILTER > options FAST_IPSEC > options TCP_SIGNATURE > device crypto > device cryptodev > options ALTQ > options ALTQ_HFSC > options ALTQ_CBQ > options ZERO_COPY_SOCKETS > options HZ=1000 > options PPS_SYNC > options NO_SWAPPING > options DEVICE_POLLING > options SMBFS > options NETSMB > options NETSMBCRYPTO > options ALTQ > options ALTQ_CBQ > options ALTQ_RED > options ALTQ_RIO > options ALTQ_HFSC > options LIBICONV > options LIBMCHAIN > > > -- > Mathieu Arnold > Thanks again, that did the job, got it down to 56MB on 6.2-RELEASE just added some of your options in. Do you know where to get more information on on the make flags available? man make and man make.conf doesn't have much detail. I've been to http://phk.freebsd.dk/misc/build_options/ which helped with my compile errors =) But i'm just out of further information on how to get it slimmer. Cheers David _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by Mathieu Arnold :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message +-Le 26/04/07 04:30 +1000, David N a dit : \| Thanks again, that did the job, got it down to 56MB on 6.2-RELEASE \| just added some of your options in. Do you know where to get more \| information on on the make flags available? man make and man make.conf \| doesn't have much detail. I've been to \| http://phk.freebsd.dk/misc/build_options/ which helped with my compile \| errors =) But i'm just out of further information on how to get it \| slimmer. I think that when I searched for all thoose, I simply used grep in src's Makefiles. -- Mathieu Arnold _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by David N-2 :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On 26/04/07, Mathieu Arnold <mat@...> wrote: > +-Le 26/04/07 04:30 +1000, David N a dit : > \| Thanks again, that did the job, got it down to 56MB on 6.2-RELEASE > \| just added some of your options in. Do you know where to get more > \| information on on the make flags available? man make and man make.conf > \| doesn't have much detail. I've been to > \| http://phk.freebsd.dk/misc/build_options/ which helped with my compile > \| errors =) But i'm just out of further information on how to get it > \| slimmer. > > I think that when I searched for all thoose, I simply used grep in src's > Makefiles. > > > -- > Mathieu Arnold > At the moment i can get it down to about 41MB by mounting the partition and deleting some files i dont need in /sbin and /usr/sbin /usr/include (I'm not sure if i need it) such as gmirror, ggatec, ggated and all that. Hopefully it doesn't bork it up =) I'm hoping for 16MB, but i don't think thats going to happen _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by Mathieu Arnold :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message +-Le 26/04/07 15:05 +1000, David N a dit : \| On 26/04/07, Mathieu Arnold <mat@...> wrote: \|> +-Le 26/04/07 04:30 +1000, David N a dit : \|> \| Thanks again, that did the job, got it down to 56MB on 6.2-RELEASE \|> \| just added some of your options in. Do you know where to get more \|> \| information on on the make flags available? man make and man make.conf \|> \| doesn't have much detail. I've been to \|> \| http://phk.freebsd.dk/misc/build_options/ which helped with my compile \|> \| errors =) But i'm just out of further information on how to get it \|> \| slimmer. \|> \|> I think that when I searched for all thoose, I simply used grep in src's \|> Makefiles. \|> \|> \|> -- \|> Mathieu Arnold \|> \| \| At the moment i can get it down to about 41MB by mounting the \| partition and deleting some files i dont need in /sbin and /usr/sbin \| /usr/include (I'm not sure if i need it) such as gmirror, ggatec, \| ggated and all that. Hopefully it doesn't bork it up =) \| \| I'm hoping for 16MB, but i don't think thats going to happen I don't know what you're trying to achieve, but you might take a look at m0n0wall <http://m0n0.ch/wall/> the 1.3 branches uses 6.x and fits in something like 10MB. -- Mathieu Arnold _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."
	Re: NanoBSD Image by Jean Milanez Melo :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message David N wrote: > > At the moment i can get it down to about 41MB by mounting the > partition and deleting some files i dont need in /sbin and /usr/sbin > /usr/include (I'm not sure if i need it) such as gmirror, ggatec, > ggated and all that. Hopefully it doesn't bork it up =) > > I'm hoping for 16MB, but i don't think thats going to happen > ____________ The TinyBSD (/usr/src/tools/tools/tinybsd) runs on 12MB. -- Jean _______________________________________________ freebsd-small@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "freebsd-small-unsubscribe@..."

LightInTheBox - Buy quality products at wholesale price!