MPC5534: p_tbclk input

[marausch01]

At page 2-28 of "e200z3 PowerPC Core Reference Manual" (e200z3RM Rev.
1, 03/2006) you can read this:
"If HID0[TBEN]=1 and HID0[SEL_TBCLK]=1, the time base and decrementer
are based on the p_tbclk input".
What is the "p_tbclk input" on a MPC5534 microprocessor?
TIA

[Dees Randy-rsaf30]

that is an optional feature of the core (having an alternate Time Base
Clock source) that is not supported in the MPC5534. The signal is tied
off and cannot be used.

________________________________

From: MPC500@... [mailto:MPC500@...] On Behalf
Of marausch01
Sent: Tuesday, October 23, 2007 12:14 PM
To: MPC500@...
Subject: [MPC500] MPC5534: p_tbclk input



At page 2-28 of "e200z3 PowerPC Core Reference Manual" (e200z3RM Rev.
1, 03/2006) you can read this:
"If HID0[TBEN]=1 and HID0[SEL_TBCLK]=1, the time base and decrementer
are based on the p_tbclk input".
What is the "p_tbclk input" on a MPC5534 microprocessor?
TI A


.
 
<http://geo.yahoo.com/serv?s=97359714/grpId=6276387/grpspId=1706554205/m
sgId=3916/stime=1193159654/nc1=3848614/nc2=4507179/nc3=4776369>
 


[Non-text portions of this message have been removed]