Kernel panics (DEC tulip driver apparently)
|
View:
New views
2 Messages
—
Rating Filter:
Alert me
|
 |
Kernel panics (DEC tulip driver apparently)
by Peter Rye
::
Rate this Message:
Has anyone seen problems related to the DEC Tulip card?
I have had repeated panics related to the tulip driver when running X over ssh to a Mac OSX X11 server. I can reasonably predictably cause a panic by running xpdf or by running Gnus on Emacs. Any suggestions? Here are the details: shiraz:/home/prye$ dmesg [ using 565552 bytes of bsd ELF symbol table ] consinit: not using prom console Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.2 (GENERIC) #1227: Tue Aug 28 11:06:57 MDT 2007 deraadt@...:/usr/src/sys/arch/alpha/compile/GENERIC Digital AlphaPC 164SX 533 MHz 8192 byte page size, 1 processor. total memory = 134217728 (131072K) (2179072 reserved for PROM, 132038656 used by OpenBSD) avail memory = 122068992 (119208K) mainbus0 at root cpu0 at mainbus0: ID 0 (primary), PCA56-2 (unknown minor type 2) cpu0: Architecture extensions: 101<MVI,BWX> cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1 cia0: extended capabilities: 1<BWEN> cia0: using BWX for PCI config and bus access pci0 at cia0 bus 0 de0 at pci0 dev 5 function 0 "DEC 21041" rev 0x21, SMC 21041 pass 2.1: eb164 irq 9, address 00:e0:29:15:1d:9a vga0 at pci0 dev 6 function 0 "Matrox MGA Millennium II 2164W" rev 0x00 wsdisplay0 at vga0 mux 1 wsdisplay0: screen 0-5 added (80x25, vt100 emulation) sio0 at pci0 dev 8 function 0 "Contaq Microsystems CY82C693U ISA" rev 0x00 pciide0 at pci0 dev 8 function 1 "Contaq Microsystems CY82C693U ISA" rev 0x00: DMA, channel 0 wired to compatibility pciide0: channel 0 disabled (no drives) pciide1 at pci0 dev 8 function 2 "Contaq Microsystems CY82C693U ISA" rev 0x00: no DMA, channel 0 wired to compatibility pciide1: channel 0 disabled (no drives) ohci0 at pci0 dev 8 function 3 "Contaq Microsystems CY82C693U ISA" rev 0x00: couldn't map interrupt siop0 at pci0 dev 9 function 0 "Symbios Logic 53c875" rev 0x03: eb164 irq 8, using 4K of on-board RAM scsibus0 at siop0: 16 targets sd0 at scsibus0 targ 0 lun 0: <SEAGATE, SX118202LC, B70C> SCSI2 0/direct fixed sd0: 17366MB, 6962 cyl, 24 head, 212 sec, 512 bytes/sec, 35566480 sec total siop0: target 1 now using 8 bit async xfers siop0: target 1 now using 8 bit 20.0 MHz 16 REQ/ACK offset xfers sd1 at scsibus0 targ 1 lun 0: <IBM OEM, DCHS04U, 6363> SCSI2 0/direct fixed sd1: 4340MB, 6077 cyl, 9 head, 162 sec, 512 bytes/sec, 8888543 sec total cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, CD-ROM XM-6201TA, 1030> SCSI2 5/cdrom removable isa0 at sio0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x3bc/4 irq 7 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec isapnp0 at isa0 port 0x279: read port 0x203 "Creative ViBRA16C PnP, CTL0001, , Audio" at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5 not configured "Creative ViBRA16C PnP, CTL7001, PNPB02F, Game" at isapnp0 port 0x200/8 not configured mcclock0 at isa0 port 0x70/2: mc146818 or compatible stray isa irq 3 root on sd0a swap on sd0b dump on sd0b siop0: target 0 now using tagged 16 bit 20.0 MHz 15 REQ/ACK offset xfers stray isa irq 3 ddb> show panic trap ddb> trace Debugger(4, fffffc0000850880, 5, 8, 3, 8) at Debugger+0x4 panic(fffffc000082a065, fffffe00041778d0, 108, 2, fffffe00041778d0, 1) at panic +0x100 trap(?, 1, 0, ?, ?, 1) at trap+0xc0 XentMM(?, 1, 0, ?, ?, 1) at XentMM+0x20 tulip_tx_intr(?, ?, ?, ?, a, 1) at tulip_tx_intr+0x17c tulip_intr_handler(?, ?, ?, ?, a, 1) at tulip_intr_handler+0x1d8 tulip_intr_handler(?, ?, ?, ?, a, 1) at tulip_intr_handler+0x1d8 ddb> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 12338 8847 12338 1000 3 0x4082 poll emacs 12847 16822 25534 8 3 0x4080 nanosleep sleep 8847 3963 8847 1000 3 0x4082 ttyin ksh 3963 25766 3963 1000 3 0x44182 select xterm 25766 32233 25766 1000 3 0x4082 ttyin ksh *32233 7990 7990 1000 7 0x100 sshd 7990 23788 7990 0 3 0x4080 netio sshd 16822 18103 25534 8 3 0x4080 pause sh 12961 6536 6536 507 3 0x4180 kqread qmgr 23839 6536 6536 507 3 0x4180 kqread pickup 31816 19398 19398 8 3 0x4080 netio perl 6536 1 6536 0 3 0x4188 kqread master 18768 1 18768 0 3 0x4082 ttyin getty 31762 1 31762 0 3 0x4082 ttyin getty 15911 1 15911 0 3 0x4082 ttyin getty 11040 1 11040 0 3 0x4082 ttyin getty 7097 1 7097 0 3 0x4082 ttyin getty 24997 1 24997 0 3 0x4082 ttyin getty 27477 1 27477 0 3 0x80 select cron 18103 1 25534 8 3 0x82 pause sh 19398 1 19398 8 3 0x80 poll innd 23788 1 23788 0 3 0x80 select sshd 16925 1 16925 0 3 0x180 select inetd 7488 11432 11432 83 3 0x180 poll ntpd 11432 1 11432 0 3 0x80 poll ntpd 10654 5420 5420 73 3 0x180 poll syslogd 5420 1 5420 0 3 0x88 netio syslogd 9 0 0 0 3 0x100200 crypto_wait crypto 8 0 0 0 3 0x100200 aiodoned aiodoned 7 0 0 0 3 0x100200 syncer update 6 0 0 0 3 0x100200 cleaner cleaner 5 0 0 0 3 0x100200 reaper reaper 4 0 0 0 3 0x100200 pgdaemon pagedaemon 3 0 0 0 3 0x100200 pftm pfpurge 2 0 0 0 3 0x100200 bored syswq 1 0 1 0 3 0x4080 wait init 0 -1 0 0 3 0x80200 scheduler swapper ddb> And another (starting emacs on X for Mac OSX over ssh): ddb> show panic trap ddb> trace Debugger(4, fffffc0000850880, 5, 8, 3, 8) at Debugger+0x4 panic(fffffc000082a065, fffffe000416b710, 108, 2, fffffe000416b710, 1) at panic +0x100 trap(?, 1, 0, ?, ?, 1) at trap+0xc0 XentMM(?, 1, 0, ?, ?, 1) at XentMM+0x20 tulip_tx_intr(?, ?, ?, ?, a, 1) at tulip_tx_intr+0x17c tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 tulip_txput(?, fffffc0000616aec, ?, ?, a, 1) at tulip_txput+0x6a4 continued .... ddb> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 10557 25920 10557 1000 3 0x4082 poll emacs 15955 20021 32357 8 3 0x4080 nanosleep sleep 20021 30592 32357 8 3 0x4080 pause sh 25920 2139 25920 1000 3 0x4082 ttyin ksh * 2139 17759 17759 1000 7 0x100 sshd 17759 21611 17759 0 3 0x4080 netio sshd 30703 2546 30703 0 3 0x4080 netio comsat 7498 25484 25484 507 3 0x4180 kqread bounce 20351 25484 25484 0 3 0x4180 kqread local 10556 29136 29136 8 3 0x4080 netio perl 16636 25484 25484 507 3 0x4180 kqread cleanup 10693 25484 25484 507 3 0x4180 kqread qmgr 2016 25484 25484 507 3 0x4180 kqread pickup 25484 1 25484 0 3 0x4188 kqread master 21868 1 21868 0 3 0x4082 ttyin getty 6556 1 6556 0 3 0x4082 ttyin getty 18313 1 18313 0 3 0x4082 ttyin getty 17808 1 17808 0 3 0x4082 ttyin getty 16171 1 16171 0 3 0x4082 ttyin getty 9427 1 9427 0 3 0x4082 ttyin getty 5130 1 5130 0 3 0x80 select cron 30592 1 32357 8 3 0x82 pause sh 29136 1 29136 8 3 0x80 poll innd 21611 1 21611 0 3 0x80 select sshd 2546 1 2546 0 3 0x180 select inetd 27105 23305 23305 83 3 0x180 poll ntpd 23305 1 23305 0 3 0x80 poll ntpd 12386 21858 21858 73 3 0x180 poll syslogd 21858 1 21858 0 3 0x88 netio syslogd 9 0 0 0 3 0x100200 crypto_wait crypto 8 0 0 0 3 0x100200 aiodoned aiodoned 7 0 0 0 3 0x100200 syncer update 6 0 0 0 3 0x100200 cleaner cleaner 5 0 0 0 3 0x100200 reaper reaper 4 0 0 0 3 0x100200 pgdaemon pagedaemon 3 0 0 0 3 0x100200 pftm pfpurge 2 0 0 0 3 0x100200 bored syswq 1 0 1 0 3 0x4080 wait init 0 -1 0 0 3 0x80200 scheduler swapper Another one (xpdf over ssh): ddb> show panic trap ddb> trace Debugger(4, fffffc0000850880, 5, 8, 3, 8) at Debugger+0x4 panic(fffffc000082a065, fffffe000419f9f8, 108, 2, fffffe000419f9f8, fffffe00041 9fe98) at panic+0x100 trap(?, 1, 0, ?, ?, fffffe000419fe98) at trap+0xc0 XentMM(?, 1, 0, ?, ?, fffffe000419fe98) at XentMM+0x20 tulip_tx_intr(?, ?, ?, ?, a, fffffe000419fe98) at tulip_tx_intr+0x17c tulip_intr_handler(?, ?, ?, ?, a, fffffe000419fe98) at tulip_intr_handler+0x1d8 tulip_intr_handler(?, ?, ?, ?, a, fffffe000419fe98) at tulip_intr_handler+0x1d8 ddb> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 27058 6628 27058 1000 3 0x4082 poll xpdf 18289 4908 4853 8 3 0x4080 nanosleep sleep 6628 27407 6628 1000 3 0x4082 pause ksh 27407 24652 27407 1000 3 0x44182 select xterm 24652 3875 24652 1000 3 0x4082 ttyin ksh 3875 23429 23429 1000 3 0x180 select sshd 23429 8842 23429 0 3 0x4080 netio sshd 4908 25648 4853 8 3 0x4080 pause sh 11747 3371 11747 1000 3 0x4082 ttyin ksh 3371 5024 5024 1000 3 0x180 select sshd 5024 8842 5024 0 3 0x4080 netio sshd 5006 13965 13965 507 3 0x4180 kqread qmgr 24350 13965 13965 507 3 0x4180 kqread pickup 25393 7538 7538 8 3 0x4080 netio perl 13965 1 13965 0 3 0x4188 kqread master 19176 1 19176 1000 3 0x4082 ttyin ksh 26361 1 26361 0 3 0x4082 ttyin getty 13994 1 13994 0 3 0x4082 ttyin getty 639 1 639 0 3 0x4082 ttyin getty 204 1 204 0 3 0x4082 ttyin getty 14011 1 14011 0 3 0x4082 ttyin getty 25016 1 25016 0 3 0x80 select cron 25648 1 4853 8 3 0x82 pause sh 7538 1 7538 8 3 0x80 poll innd 8842 1 8842 0 3 0x80 select sshd 11562 1 11562 0 3 0x180 select inetd 16806 17277 17277 83 3 0x180 poll ntpd 17277 1 17277 0 3 0x80 poll ntpd 15270 11276 11276 73 3 0x180 poll syslogd 11276 1 11276 0 3 0x88 netio syslogd 9 0 0 0 3 0x100200 crypto_wait crypto 8 0 0 0 3 0x100200 aiodoned aiodoned 7 0 0 0 3 0x100200 syncer update 6 0 0 0 3 0x100200 cleaner cleaner 5 0 0 0 3 0x100200 reaper reaper 4 0 0 0 3 0x100200 pgdaemon pagedaemon 3 0 0 0 3 0x100200 pftm pfpurge 2 0 0 0 3 0x100200 bored syswq 1 0 1 0 3 0x4080 wait init 0 -1 0 0 3 0x80200 scheduler swapper Another one (xpdf over ssh on Mac OSX X11): ddb> show panic trap ddb> trace Debugger(4, fffffc0000850880, 5, 8, 3, 8) at Debugger+0x4 panic(fffffc000082a065, fffffe000418b9f8, 108, 2, fffffe000418b9f8, fffffe00041 8be98) at panic+0x100 trap(?, 1, 0, ?, ?, fffffe000418be98) at trap+0xc0 XentMM(?, 1, 0, ?, ?, fffffe000418be98) at XentMM+0x20 tulip_tx_intr(?, ?, ?, ?, a, fffffe000418be98) at tulip_tx_intr+0x17c tulip_intr_handler(?, ?, ?, ?, a, fffffe000418be98) at tulip_intr_handler+0x1d8 tulip_intr_handler(?, ?, ?, ?, a, fffffe000418be98) at tulip_intr_handler+0x1d8 ddb> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 13608 8099 13608 1000 3 0x4082 poll xpdf 8099 7222 8099 1000 3 0x4082 pause ksh 7222 373 373 1000 3 0x180 select sshd 373 3401 373 0 3 0x4080 netio sshd 8183 4706 30438 8 3 0x4080 nanosleep sleep 4706 10224 30438 8 3 0x4080 pause sh 31169 6466 6466 8 3 0x4080 netio perl 23684 4490 4490 507 3 0x4180 kqread qmgr 5090 4490 4490 507 3 0x4180 kqread pickup 4490 1 4490 0 3 0x4188 kqread master 1584 1 1584 1000 3 0x4082 ttyin ksh 5221 1 5221 0 3 0x4082 ttyin getty 3651 1 3651 0 3 0x4082 ttyin getty 6505 1 6505 0 3 0x4082 ttyin getty 5575 1 5575 0 3 0x4082 ttyin getty 7426 1 7426 0 3 0x4082 ttyin getty 4156 1 4156 0 3 0x80 select cron 10224 1 30438 8 3 0x82 pause sh 6466 1 6466 8 3 0x80 poll innd 3401 1 3401 0 3 0x80 select sshd 14552 1 14552 0 3 0x180 select inetd 25446 11185 11185 83 3 0x180 poll ntpd 11185 1 11185 0 3 0x80 poll ntpd 17113 20236 20236 73 3 0x180 poll syslogd 20236 1 20236 0 3 0x88 netio syslogd 9 0 0 0 3 0x100200 crypto_wait crypto 8 0 0 0 3 0x100200 aiodoned aiodoned 7 0 0 0 3 0x100200 syncer update 6 0 0 0 3 0x100200 cleaner cleaner 5 0 0 0 3 0x100200 reaper reaper 4 0 0 0 3 0x100200 pgdaemon pagedaemon 3 0 0 0 3 0x100200 pftm pfpurge 2 0 0 0 3 0x100200 bored syswq 1 0 1 0 3 0x4080 wait init 0 -1 0 0 3 0x80200 scheduler swapper |
|
|
Re: Kernel panics (DEC tulip driver apparently)
by Martin Reindl-3
::
Rate this Message:
Peter Rye <prye@...> wrote:
> Has anyone seen problems related to the DEC Tulip card? > > I have had repeated panics related to the tulip driver when running X over > ssh to a Mac OSX X11 server. I can reasonably predictably cause a panic by > running xpdf or by running Gnus on Emacs. > > Any suggestions? > boot -fl c, disable de(4), run on dc(4). See config(8) too. |
| Free Forum Powered by Nabble | Forum Help |
