Nabble - K3b - The CD Creator for KDE

Problem burning some Data DVD's

2008-10-10T14:56:32Z

openSUSE 11.0, KDE 3.5.9 release 49.1, k3b1.0.5

I'm trying to burn a 2.4 GB data file on to a DVD-RW thats been used before.
Its supposed to format it first (or write over it). k3b reconizes it as a
complete dvd (was burned with k3b when new), it says format failed and when
you click Ok it go on and says writting data dvd but never advances from 0%
even after going for at least a 1/2 hour.

I instert a used dvd+RW and it writes the same file with same burn parameters
fine.

Do I need to report this as a bug?
--
Russ
Linux register user 441463
openSUSE 11.0

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Please insert an empty or appendable Double Layer DVD+R medium...

2008-10-07T09:07:34Z

I get the following message when I want to burn my backups on a +R dvd:
"Please insert an empty or appendable Double Layer DVD+R medium..."
Fedora recognizes a "Blank DVD+R Disc"
What to do?

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

k3b can't found CD/DVD writer

2008-09-21T01:54:37Z

Hi!

Then I start k3b I got message "No CD/DVD writer found."
If I trying "Stettings"->"Configure K3b..."->"Devices"->"Add
Device..." and write to input box: /dev/acd0
I got message "Could not find an additional device at /dev/acd0"

[root@kh:~]# uname -mrs
FreeBSD 7.0-RELEASE i386
[root@kh:~]# pkg_info | grep k3b
k3b-1.0.5 A CD/DVD recording GUI for KDE
[root@kh:~]# dmesg | grep acd
acd0: DVDR <Optiarc DVD RW AD-5170A/1.13> at ata0-master UDMA66
GEOM_LABEL: Label for provider acd0 is iso9660/5-7.
[root@kh:~]# ls -al /dev/acd0
crw-rw-rw- 1 root operator 0, 75 20 сен 14:17 /dev/acd0
[root@kh:~]#

How to solve the problem?
Thanks.

--
Konstantin Stroikovski
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Splitting isos

2008-09-15T00:13:42Z

Hello list,

I have to split iso-files from DVDs so that they fit on normal CDs (no, don't ask why, the explanation is stupid). I searched through repositories and found 2 tools : "gfslicer" and "hoz". Does anybody have expierence doing this and therefor can give me advice which tool I should use?

Regards,
Dennis
--
Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten
Browser-Versionen downloaden: http://www.gmx.net/de/go/browser

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: Monkey's Audio Plugin v3.1: compile error

2008-09-12T18:36:28Z

On Wed, 2008-08-27 at 12:27 -0700, Colin Brace wrote:

>
> Bugzilla from rdieter@... wrote:
> >
> > In the meantime, since Fedora doesn't ship any k3b addons/plugins, and to
> > simplify packaging/deployment, I believe we(fedora) currently disables
> > the -devel portions of k3b's packaging, which is probably a source for
> > failure here.
> >
> Hi Rex,
>
> It would seem you are correct. I downloaded the K3b source and compiled it,
> then tried compiling the monkey audio plugin again; this time it worked, and
> I am able to burn an APE/cue disk image.
>
> If you could re-enable the -devel portions in a future release, this would
> indeed save some trouble.

Some of the plugins are available from the livna repo in the package
k3b-extras-nonfree. I second the suggestion to add the -devel package
to the Fedora distribution.

Contents of livna k3b-extras-nonfree pachage are:

$ rpm -qil k3b-extras-nonfree
Name : k3b-extras-nonfree Relocations: (not relocatable)
Version : 1.0.4 Vendor: rpm.livna.org
Release : 2.lvn9 Build Date: Thu Jan 31 11:22:52 2008
Install Date: Fri Sep 12 18:28:04 2008 Build Host: plague-builder.livna.org
Group : Applications/Multimedia Source RPM: k3b-extras-nonfree-1.0.4-2.lvn9.src.rpm
Size : 194840 License: GPL
Signature : DSA/SHA1, Thu Jan 31 20:43:03 2008, Key ID 71295441a109b1ec
Packager : rpm.livna.org <http://bugzilla.livna.org>
URL : http://www.k3b.org
Summary : Additional codec plugins for the k3b CD/DVD burning application
Description :
Additional decoder/encoder plugins for k3b, a feature-rich and easy to
handle CD/DVD burning application.
/usr/lib64/kde3/libk3bffmpegdecoder.la
/usr/lib64/kde3/libk3bffmpegdecoder.so
/usr/lib64/kde3/libk3blameencoder.la
/usr/lib64/kde3/libk3blameencoder.so
/usr/lib64/kde3/libk3bmaddecoder.la
/usr/lib64/kde3/libk3bmaddecoder.so
/usr/share/apps/k3b/plugins/k3bffmpegdecoder.plugin
/usr/share/apps/k3b/plugins/k3blameencoder.plugin
/usr/share/apps/k3b/plugins/k3bmaddecoder.plugin

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

K3b locks computer when run

2008-09-12T11:53:17Z

I'm using Kubuntu 7.0.4. Yesterday I had KDE update K3b and some other things
(Python and KDevelop) and now when I run K3b, it totally locks the computer
up. The mouse freezes and nothing responds at all. I have to press reset to
recover.

I left it for almost an hour once and it was still locked up.

Here is the output of uname -a:

Linux CSE 2.6.20-14-generic #2 SMP Mon Apr 2 20:37:49 UTC 2007 i686 GNU/Linux

My computer is an AMD dual core, 64-bit with 2g RAM. The DVD is a Liteon. It
plays DVDs and CDs fine, but I've never been able to burn with it under
Linux.

Anyone know what the problem could be? Please let me know if I need to supply
more info.

--
Ron

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: k3b not showing files

2008-09-09T23:51:15Z

On Wed, 10 Sep 2008 13:36:42 +1200
Rose McGillicuddy <rmcgillicuddy@...> wrote:

Hello Rose,

> Thanks Brad

You're welcome, Rose.

> Sorry about reply going to wrong place - a long time since I used a

Not to worry. It's for future users' benefit, as I said.

> mailing list and can't remember the email settings to ensure the reply
> goes to correct place.

I'm not sure how Tbird does such things, but usually it's along the
lines of "Reply All", and remove the unwanted To or Cc lines.

--
Regards _
/ ) "The blindingly obvious is
/ _)rad never immediately apparent"

A friend of a friend he got beaten
I Predict A Riot - Kaiser Chiefs

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

signature.asc (204 bytes) Download Attachment

From forum: k3b-user

k3b not showing files

2008-09-09T18:36:42Z

Thanks Brad

That fixed it, now appears as it used to.

Sorry about reply going to wrong place - a long time since I used a
mailing list and can't remember the email settings to ensure the reply
goes to correct place.

Thanks again Rose
--
Registered Linux User No: 386597
http://counter.li.org
"The most beautiful thing in life we can experience is the mysterious.
It is the source of all true science." Einstein

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: kde4 port progress/news?

2008-09-09T10:45:09Z

Rex Dieter wrote on 8/27:

> Inquiring minds want to know... :)
> Any news or status report on k3b being ported for kde4?

I'll take that as being no news, is bad news, for now I guess.

-- Rex

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: k3b not showing files

2008-09-09T04:06:28Z

On Tue, 09 Sep 2008 22:36:30 +1200
Rose McGillicuddy <rmcgillicuddy@...> wrote:

Hello Rose,

> where do I find that - hav
> e been through the menus

First, make sure "Settings" menu "Show Contents" is checked. That'll
open a window showing directories, above which appear some icons for
"back" (left arrow) "up" (up arrow), Home (house), etc. On the right of
those is a pick list labelled "Filter:"

Finally, please keep any replies sent to the list, rather than me
personally. If you're having problems, it's likely others are too, and
having the thread available in the archives, for them to search, will be
beneficial.

--
Regards _
/ ) "The blindingly obvious is
/ _)rad never immediately apparent"

The stakes were high but the danger low
Charade - Skids

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: k3b not showing files

2008-09-09T00:52:19Z

On Tue, 09 Sep 2008 19:07:10 +1200
Rose McGillicuddy <rmcgillicuddy@...> wrote:

Hello Rose,

> Until a few weeks ago k3b worked like a dream, now when I want to make
> a CD of photos I can't see the individual files in the directories. I

What have you got the "Filter" pick list set to? If it's anything other
than "All files" you won't see picture files listed, as the other options
are sound/movie related.

--
Regards _
/ ) "The blindingly obvious is
/ _)rad never immediately apparent"

What do you call that noise, that you put on?
This Is Pop - XTC

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

signature.asc (204 bytes) Download Attachment

From forum: k3b-user

k3b not showing files

2008-09-09T00:07:10Z

Until a few weeks ago k3b worked like a dream, now when I want to make a
CD of photos I can't see the individual files in the directories. I
uninstalled k3b and reinstalled, but still doesn't do it. I run
Pclinuxos 2007 and installed k3b via synaptic package management.

Thanks Rose
--
Registered Linux User No: 386597
http://counter.li.org
"The most beautiful thing in life we can experience is the mysterious.
It is the source of all true science." Einstein

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

double layer not recognised in writing

2008-08-28T09:30:03Z

I have a LG dvdwriter with blank DVD-DL+ disc which is recognised by k3b.

when i create a project, the available disk space is only 4G. when i add a file bigger than 4g, it is rejected.

I am using centos 5.1 and k3b 0.12.17

pls kindly advise

From forum: k3b-user

Re: Change default settings for CD ripping

2008-08-27T22:49:28Z

On Thu, 28 Aug 2008 11:38:10 +0900
homoludens <homoludens1000@...> wrote:

Hello homoludens,

> is it possible to change the default settings for
> ripping CDs?

What you want can be done by going to the Settings menu, then "Configure
K3b..." which will open a window at "Misc" settings. At the bottom is a
pick list for "Default action dialog settings:" Change this from
'default settings' to 'saved settings'. Now, whenever you open a Burn
dialog it'll load your preferred settings, not the defaults.

--
Regards _
/ ) "The blindingly obvious is
/ _)rad never immediately apparent"

Just stop and take a second
U & Ur Hand - Pink

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

signature.asc (204 bytes) Download Attachment

From forum: k3b-user

Change default settings for CD ripping

2008-08-27T19:38:10Z

Hi everyone,

is it possible to change the default settings for
ripping CDs?

I'm referring to the window that pops up after pressing
the "Start ripping" button; it does offer the option
of saving the current settings for later use, but if
possible I'd like to change the default entirely (esp.
the default save directory and encoding settings).

Cheers,

homoludens

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: Monkey's Audio Plugin v3.1: compile error

2008-08-27T12:27:51Z

Bugzilla from rdieter@math.unl.edu wrote:

In the meantime, since Fedora doesn't ship any k3b addons/plugins, and to
simplify packaging/deployment, I believe we(fedora) currently disables
the -devel portions of k3b's packaging, which is probably a source for
failure here.

Hi Rex,

It would seem you are correct. I downloaded the K3b source and compiled it, then tried compiling the monkey audio plugin again; this time it worked, and I am able to burn an APE/cue disk image.

If you could re-enable the -devel portions in a future release, this would indeed save some trouble.

Thanks.

Colin Brace
Amsterdam
http://lim.nl

From forum: k3b-user

kde4 port progress/news?

2008-08-27T07:46:33Z

Inquiring minds want to know... :)

Any news or status report on k3b being ported for kde4?

-- Rex

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: Monkey's Audio Plugin v3.1: compile error

2008-08-27T07:45:38Z

Colin Brace wrote:

> I am trying to compile it on an i686 system running Fedora 9.
> gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC)
> ./configure --prefix=/usr/local
>
> As an aside, I don't see the plugin in either the Fedora KDE or the Ubuntu
> repos. I wonder why.

Probably because no one's bothered to package/maintain it yet. Any
takers? :)

In the meantime, since Fedora doesn't ship any k3b addons/plugins, and to
simplify packaging/deployment, I believe we(fedora) currently disables
the -devel portions of k3b's packaging, which is probably a source for
failure here.

-- Rex

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: Monkey's Audio Plugin v3.1: compile error

2008-08-27T07:29:36Z

Arthur Marsh wrote:

Is this the source that you were using:

453123 2007-01-30 18:36 k3bmonkeyaudioplugin-3.1.tar.bz2

My last build from source produced:

158804 2007-05-18 11:40 k3bmonkeyaudioplugin_3.1-2_i386.deb

without problem (Debian unstable, PII-266 CPU).

What build environment did you use? (Distribution, architecture, gcc
version, any options passed to ./configure)?

The tarball that I got from the sourceforge archive (linked from the K3b home page) has an earlier timestamp although the file length looks the same:

453123 2006-09-21 10:54 k3bmonkeyaudioplugin-3.1.tar.bz2

I am trying to compile it on an i686 system running Fedora 9.

gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC)

./configure --prefix=/usr/local

As an aside, I don't see the plugin in either the Fedora KDE or the Ubuntu repos. I wonder why.

Thanks.

Colin Brace
Amsterdam
http://lim.nl

From forum: k3b-user

Re: Monkey's Audio Plugin v3.1: compile error

2008-08-27T07:18:31Z

Colin Brace wrote, on 27/08/08 20:58:
> Hi all,
>
> I am getting a compile error compiling the monkey's audio plugin.
> './configure' runs fine, but 'make' chokes and displays the following error.
> Anyone have any idea what is going wrong?
>
> Thanks.

Is this the source that you were using:

453123 2007-01-30 18:36 k3bmonkeyaudioplugin-3.1.tar.bz2

My last build from source produced:

158804 2007-05-18 11:40 k3bmonkeyaudioplugin_3.1-2_i386.deb

without problem (Debian unstable, PII-266 CPU).

What build environment did you use? (Distribution, architecture, gcc
version, any options passed to ./configure)?

Arthur.

>
> [...]
> k3bmonkeydecoder.cpp: At global scope:
> k3bmonkeydecoder.cpp:32: error: expected constructor, destructor, or type
> conversion before '(' token
> k3bmonkeydecoder.cpp:46: error: expected constructor, destructor, or type
> conversion before '*' token
> k3bmonkeydecoder.cpp:53: error: prototype for 'bool
> K3bMonkeyDecoderFactory::canDecode(const KURL&)' does not match any in class
> 'K3bMonkeyDecoderFactory'
> k3bmonkeydecoder.h:30: error: candidate is: bool
> K3bMonkeyDecoderFactory::canDecode(int)
> k3bmonkeydecoder.cpp:81: error: expected `)' before '*' token
> k3bmonkeydecoder.cpp:95: error: no 'QString K3bMonkeyDecoder::fileType()
> const' member function declared in class 'K3bMonkeyDecoder'
> k3bmonkeydecoder.cpp:101: error: 'bool
> K3bMonkeyDecoder::analyseFileInternal' is not a static member of 'class
> K3bMonkeyDecoder'
> k3bmonkeydecoder.cpp:101: error: 'K3b' has not been declared
> k3bmonkeydecoder.cpp:101: error: 'frames' was not declared in this scope
> k3bmonkeydecoder.cpp:101: error: expected primary-expression before 'int'
> k3bmonkeydecoder.cpp:101: error: expected primary-expression before 'int'
> k3bmonkeydecoder.cpp:101: error: initializer expression list treated as
> compound expression
> k3bmonkeydecoder.cpp:102: error: expected ',' or ';' before '{' token
> make[3]: *** [k3bmonkeydecoder.lo] Error 1
> make[3]: Leaving directory `/usr/local/src/k3bmonkeyaudioplugin-3.1/src'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/usr/local/src/k3bmonkeyaudioplugin-3.1/src'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/usr/local/src/k3bmonkeyaudioplugin-3.1'
> make: *** [all] Error 2
>
> -----
> Colin Brace
> Amsterdam
> http://lim.nl

From forum: k3b-user

Monkey's Audio Plugin v3.1: compile error

2008-08-27T04:28:41Z

Hi all,

I am getting a compile error compiling the monkey's audio plugin. './configure' runs fine, but 'make' chokes and displays the following error. Anyone have any idea what is going wrong?

Thanks.

[...]
k3bmonkeydecoder.cpp: At global scope:
k3bmonkeydecoder.cpp:32: error: expected constructor, destructor, or type conversion before '(' token
k3bmonkeydecoder.cpp:46: error: expected constructor, destructor, or type conversion before '*' token
k3bmonkeydecoder.cpp:53: error: prototype for 'bool K3bMonkeyDecoderFactory::canDecode(const KURL&)' does not match any in class 'K3bMonkeyDecoderFactory'
k3bmonkeydecoder.h:30: error: candidate is: bool K3bMonkeyDecoderFactory::canDecode(int)
k3bmonkeydecoder.cpp:81: error: expected `)' before '*' token
k3bmonkeydecoder.cpp:95: error: no 'QString K3bMonkeyDecoder::fileType() const' member function declared in class 'K3bMonkeyDecoder'
k3bmonkeydecoder.cpp:101: error: 'bool K3bMonkeyDecoder::analyseFileInternal' is not a static member of 'class K3bMonkeyDecoder'
k3bmonkeydecoder.cpp:101: error: 'K3b' has not been declared
k3bmonkeydecoder.cpp:101: error: 'frames' was not declared in this scope
k3bmonkeydecoder.cpp:101: error: expected primary-expression before 'int'
k3bmonkeydecoder.cpp:101: error: expected primary-expression before 'int'
k3bmonkeydecoder.cpp:101: error: initializer expression list treated as compound expression
k3bmonkeydecoder.cpp:102: error: expected ',' or ';' before '{' token
make[3]: *** [k3bmonkeydecoder.lo] Error 1
make[3]: Leaving directory `/usr/local/src/k3bmonkeyaudioplugin-3.1/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/usr/local/src/k3bmonkeyaudioplugin-3.1/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/local/src/k3bmonkeyaudioplugin-3.1'
make: *** [all] Error 2

Colin Brace
Amsterdam
http://lim.nl

From forum: k3b-user

Erasing DVD/RW

2008-08-12T03:52:31Z

Can someone tell me how I quick erase a DVD/RW disc. I can only see the
option for erase CD/RW and if I use that it then wants to format the DVD
which takes forever. This is annoying as I have to keep using Nero
Burning Rom in Windows just to get my discs erased. Its strange how I
can do everything including burn DVD image etc but cant erase a dvd.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: building from source on Ubuntu Hardy 8.04.1

2008-07-25T11:49:14Z

martin|surf is religion wrote:
> When I do $ sudo apt-get build-dep k3b system returns: [...]
> E: Debe poner algunos URIs 'fuente' en su sources.list (in english: You
> must add some source URI(URL)s in your sources.list)

uncomment the lines starting with "deb-src"

> I know sources.list file and I edit it every time I need to add a new
> repository but this time I'm not sure why this error is related with
> repositories.

Because binary packages list and source package list are separated.

> " checking for X... configure: error: Can't find X libraries. Please
> check your installation and add the correct paths! "
>
> Other apps just compile ok so I'm totally lost with this one, may be
> it's related to KDE missing libs?

The error message is clear about what the ./configure script does not find.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: building from source on Ubuntu Hardy 8.04.1

2008-07-25T11:42:45Z

Hello again and thank you very much for your kind and quick response.

When I do $ sudo apt-get build-dep k3b system returns:

Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo la información de estado... Hecho
E: Debe poner algunos URIs 'fuente' en su sources.list (in english: You must add some source URI(URL)s in your sources.list)

I know sources.list file and I edit it every time I need to add a new repository but this time I'm not sure why this error is related with repositories.

Also, as I stated in my original message I'm having this error while trying to ./configure the International 1.05 version:

" checking for X... configure: error: Can't find X libraries. Please check your installation and add the correct paths! "

Other apps just compile ok so I'm totally lost with this one, may be it's related to KDE missing libs?

Thank you for any help and feedback you can give me =)

Best,
Martin Cigorraga

----- Mensaje original ----
De: Mihamina Rakotomandimby (R12y) <mihamina.rakotomandimby@...>
Para: k3b-user@...
CC: martin|surf is religion <martosurf@...>
Enviado: viernes 25 de julio de 2008, 2:45:13
Asunto: Re: [K3b-user] building from source on Ubuntu Hardy 8.04.1

martin|surf is religion wrote:
> Did I miss any special parameter? What I'm doing wrong?

Its a common, mistake: you did not install the needed "*-dev" packages
It's not possible for me to list you what does k3b need, but you could
use the dependences of the official source package by running:
$ sudo apt-get build-dep k3b
That will fetch all the packages needed by the packaged k3b for your
distribution. May be, the current snapshot will need a bit more, but it
will be easier to fin dout what since you have done most of the job with
the previous command.

¡Buscá desde tu celular! Yahoo! oneSEARCH ahora está en Claro
http://ar.mobile.yahoo.com/onesearch
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: building from source on Ubuntu Hardy 8.04.1

2008-07-24T22:45:13Z

martin|surf is religion wrote:
> Did I miss any special parameter? What I'm doing wrong?

Its a common, mistake: you did not install the needed "*-dev" packages
It's not possible for me to list you what does k3b need, but you could
use the dependences of the official source package by running:
$ sudo apt-get build-dep k3b
That will fetch all the packages needed by the packaged k3b for your
distribution. May be, the current snapshot will need a bit more, but it
will be easier to fin dout what since you have done most of the job with
the previous command.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

building from source on Ubuntu Hardy 8.04.1

2008-07-24T22:19:07Z

Hi! I need to compile K3b -best burner in the world- but have this error message while doing ./configure:

checking for X... configure: error: Can't find X libraries. Please check your installation and add the correct paths!

I know since Ubuntu ships Gnome by default there are *many* missing KDE libraries, the X itself is up and running...

Did I miss any special parameter? What I'm doing wrong?

I first tried downloading K3b from repositories but it's in English and I would greatly appreciate I can use it in my home language, Spanish, that's why I need to compile source code of International versio =)

Hope anyone knows to do next !

Best,
Martin
Mar del Plata / Argentina

From forum: k3b-user

Re: Launching k3b takes 20 minutes.

2008-07-13T19:32:27Z

On Sunday 13 July 2008 10:44:47 Donald Grbac wrote:

> Thanks for the reply.
>
> No, as far as I know I am not using the "testing repository". Synoptic
> lists several repositories. At first I assumed they were all mirrors of
> each other. Then I discovered the one I first chose had little in it, and
> the others had much more. So, I activated several for the search option.
>
> I didn't ask this question to the PCLinuxOS group, but should I just be
> using one repository? And if so, which one? A user wants access to all
> possible applications - of course.
>

We're getting off-topic but, yes, one repo should do it (and that's what's
recommended by Texstar and the rest of the developers.) If you want to live
on the bleeding edge, you can manually add the testing repository into the
list. I wouldn't recommend it for a system that you want to keep running
without hiccups, though.

--
20:29:56 up 4 days, 7:56, running PCLinuxOS release 2007 (PCLinuxOS) for i586,
kernel 2.6.22.17.tex2
Registered Linux user #324360
Folding@Home Team: Ex-Zoomies (31839)

After watching my newly-retired dad spend two weeks learning how to make a new
folder, it became obvious that "intuitive" mostly means "what the writer or
speaker of intuitive likes".
-- Bruce Ediger, bediger@..., on X the intuitiveness of a Mac
interface

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: Launching k3b takes 20 minutes.

2008-07-13T09:44:47Z

Thanks for the reply.

No, as far as I know I am not using the "testing repository". Synoptic lists several repositories. At first I assumed they were all mirrors of each other. Then I discovered the one I first chose had little in it, and the others had much more. So, I activated several for the search option.

I didn't ask this question to the PCLinuxOS group, but should I just be using one repository? And if so, which one? A user wants access to all possible applications - of course.

Glenn wrote:

On Saturday 12 July 2008 13:20:51 Donald Grbac wrote:

All other PCLinuxOS users claim they don't see this problem.


Darn, you beat me to the punch <g>.  I'm using K3b to copy some audio CDs as I 
type this, using PCLinuxOS and k3b ver 1.0.5.  Are you using a version out of 
the testing repo, by any chance?

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: Launching k3b takes 20 minutes.

2008-07-12T20:09:07Z

On Saturday 12 July 2008 13:20:51 Donald Grbac wrote:

>
> All other PCLinuxOS users claim they don't see this problem.
>
>

Darn, you beat me to the punch <g>. I'm using K3b to copy some audio CDs as I
type this, using PCLinuxOS and k3b ver 1.0.5. Are you using a version out of
the testing repo, by any chance?

--
21:05:10 up 3 days, 8:31, running PCLinuxOS release 2007 (PCLinuxOS) for i586,
kernel 2.6.22.17.tex2
Registered Linux user #324360
Folding@Home Team: Ex-Zoomies (31839)

Today is what happened to yesterday.

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Launching k3b takes 20 minutes.

2008-07-12T12:20:51Z

Hello everyone!

I have a frustrating problem I am trying to solve.

I have been a Linux user for many years and I am currently using
PCLinuxOS since its final version came available last year. One of my
most used applications is k3b, and everything has been working well
until very recently.

I noticed a k3b upgrade was available in the PCLinuxOS repository, so
(innocently enough) I upgraded k3b. Since then, k3b takes
approximately 20 minutes to launch. I have been working with the
PCLinuxOS Support Forum to try to figure this out, so far with no luck.

Using the "top" console command, I determined that k3b was running the
following series of commands:

k3b
cdrdao
wodim
dvd+rw-format
growisofs
genisoimage
normalize
readom
sox
transcode
vcdxbuild
vcdxminfo
vcdxrip
k3b
(repeats)

It takes about 10 minutes to run through the set once, then the set
repeats. This accounts for the 20 minute launch time. After this, k3b
comes up as expected.

Does anyone here have any idea what is happening?

Several suggestions have already been tried with no luck, including:

Doing a full upgrade,
Completely removing k3b and the commands shown above, and reinstalling
the Synaptic package files.

K3b acts the same whether launched from the KDE menu or from a console
window.

All other PCLinuxOS users claim they don't see this problem.

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

cdrecord issue

2008-07-10T10:11:05Z

On a fresh install of Mandriva 2008.1 I have :
1 - k3b complains as the cd drive has no DMA activated (that's true)
2 - after starting to write a cd, k3b stops about at 25% of recording process,
and an error message informs me cdrecord has no rights to access the device.

The second issue is the more important, I think, and I cannot explain it.

Any suggestions ?

Massimo

Massimo Corinaldesi
http://www.ziomassimo.it

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: musicbrainz

2008-07-10T04:57:04Z

On Thu, Jul 10, 2008 at 1:31 PM, Brad Rogers <brad@...> wrote:
> On Thu, 10 Jul 2008 11:05:11 +0300
> "Amir E. Aharoni" <amir.aharoni@...> wrote:
>
> Hello Amir,
>
>> prefer MusicBrainz, as it is usually more precise and has better
>
> Settings menu, K3b settings;- CDDB "Remote" tab, perhaps?

I entered musicbrainz.org as the server and deleted freedb2.org, but
it seems that K3b keeps getting the data from freedb.

The track names that i get are like those in freedb, not musicbrainz.

--
Amir Elisha Aharoni

English - http://aharoni.wordpress.com
עברית - http://haharoni.wordpress.com

"We're living in pieces,
I want to live in peace." - T. Moore
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Re: musicbrainz

2008-07-10T03:31:55Z

On Thu, 10 Jul 2008 11:05:11 +0300
"Amir E. Aharoni" <amir.aharoni@...> wrote:

Hello Amir,

> prefer MusicBrainz, as it is usually more precise and has better

Settings menu, K3b settings;- CDDB "Remote" tab, perhaps?

--
Regards _
/ ) "The blindingly obvious is
/ _)rad never immediately apparent"

Keep your drink just give em the money
U & Ur Hand - Pink

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

signature.asc (196 bytes) Download Attachment

From forum: k3b-user

musicbrainz

2008-07-10T01:05:11Z

Hi,

I am using K3b 1.0.5. on KDE 3.5.9-5.fc8 on Fedora 8.

It looks like K3b reads CD info from CDDB and not from MusicBrainz. I
prefer MusicBrainz, as it is usually more precise and has better
Unicode support.

Can i make it work somehow?

Thanks.

--
Amir Elisha Aharoni

English - http://aharoni.wordpress.com
עברית - http://haharoni.wordpress.com

"We're living in pieces,
I want to live in peace." - T. Moore
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user

Plextor PX-810UF writing error on K3b 1.0.4

2008-07-09T19:04:51Z

OS: Kubuntu 8.04.1 LTS (always updated)
Device: Plextor PX-810UF (external over USB)
Media: Verbatim DVD-R 4,7GB (ID: MCC 03RG20)

Wrote 150,6MB and then I got error. I just wrote several disks before. DVD-writer is quite new.

Here is the log:

System
-----------------------
K3b Version: 1.0.4

KDE Version: 3.5.9
QT Version: 3.3.8b
Kernel: 2.6.24-19-generic
Devices
-----------------------
PLEXTOR DVDR PX-740A 1.01 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL,
DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R järjestikune, DVD-R kahekihiline järjestikune, DVD-R
kahekihiline hüpetega, DVD-RW piiratud ülekirjutamisega, DVD-RW järjestikune, DVD+RW, DVD+R, DVD+R
kahekihiline, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96R, Piiratud
ülekirjutamine, Kahekihiline hüpetega]

SONY DVD-ROM DDU1621 S3.5 (/dev/scd1, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [Puudub]
PLEXTOR DVDR PX-810UF 1.00 (/dev/scd2, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL,
DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R järjestikune, DVD-R kahekihiline järjestikune, DVD-R
kahekihiline hüpetega, DVD-RAM, DVD-RW piiratud ülekirjutamisega, DVD-RW järjestikune, DVD+RW,
DVD+R, DVD+R kahekihiline, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16,
RAW/R96P, RAW/R96R, Piiratud ülekirjutamine, Kahekihiline hüpetega]
Burned media
-----------------------
DVD-R järjestikune

K3bIsoImager
-----------------------
mkisofs print size result: 2221112 (4548837376 bytes)
Pipe throughput: 191544064 bytes read, 191539712 bytes written.

Used versions
-----------------------
mkisofs: 1.1.6
growisofs: 7.0.1

growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/scd2 obs=32k seek=0'
/dev/scd2: "Current Write Speed" is 4.1x1352KBps.
23232512/4548837376 ( 0.5%) @4.0x, remaining 19:28 RBU 100.0% UBU 2.9%
41779200/4548837376 ( 0.9%) @4.0x, remaining 17:58 RBU 100.0% UBU 100.0%
60358656/4548837376 ( 1.3%) @4.0x, remaining 16:06 RBU 100.0% UBU 100.0%
78905344/4548837376 ( 1.7%) @4.0x, remaining 15:06 RBU 100.0% UBU 100.0%
97452032/4548837376 ( 2.1%) @4.0x, remaining 15:13 RBU 100.0% UBU 100.0%
116031488/4548837376 ( 2.6%) @4.0x, remaining 14:38 RBU 100.0% UBU 100.0%
134578176/4548837376 ( 3.0%) @4.0x, remaining 14:12 RBU 100.0% UBU 100.0%
153124864/4548837376 ( 3.4%) @4.0x, remaining 14:21 RBU 100.0% UBU 100.0%
:-( unable to WRITE@LBA=12d20h: Input/output error
:-( write failed: Input/output error
/dev/scd2: flushing cache
/dev/scd2: updating RMA
/dev/scd2: closing disc

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/scd2=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty
-use-the-force-luke=tracksize:2221112 -dvd-compat -speed=2.4 -overburn -use-the-force-luke=bufsize:32m

mkisofs
-----------------------
2221112
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.02% done, estimate finish Thu Jul 10 04:47:05 2008
0.05% done, estimate finish Thu Jul 10 04:47:05 2008
0.07% done, estimate finish Thu Jul 10 04:47:05 2008
0.09% done, estimate finish Thu Jul 10 04:47:05 2008
0.11% done, estimate finish Thu Jul 10 04:47:05 2008
0.14% done, estimate finish Thu Jul 10 04:47:05 2008
0.16% done, estimate finish Thu Jul 10 04:47:05 2008
0.18% done, estimate finish Thu Jul 10 04:47:05 2008
0.20% done, estimate finish Thu Jul 10 04:47:05 2008
0.23% done, estimate finish Thu Jul 10 04:47:05 2008
0.25% done, estimate finish Thu Jul 10 04:47:05 2008
0.27% done, estimate finish Thu Jul 10 04:47:05 2008
0.29% done, estimate finish Thu Jul 10 04:47:05 2008
0.32% done, estimate finish Thu Jul 10 04:47:05 2008
0.34% done, estimate finish Thu Jul 10 04:47:05 2008
0.36% done, estimate finish Thu Jul 10 04:47:05 2008
0.38% done, estimate finish Thu Jul 10 04:47:05 2008
0.41% done, estimate finish Thu Jul 10 04:47:05 2008
0.43% done, estimate finish Thu Jul 10 04:47:05 2008
0.45% done, estimate finish Thu Jul 10 04:47:05 2008
0.47% done, estimate finish Thu Jul 10 04:47:05 2008
0.50% done, estimate finish Thu Jul 10 04:47:05 2008
0.52% done, estimate finish Thu Jul 10 04:47:05 2008
0.54% done, estimate finish Thu Jul 10 04:47:05 2008
0.56% done, estimate finish Thu Jul 10 04:47:05 2008
0.59% done, estimate finish Thu Jul 10 04:47:05 2008
0.61% done, estimate finish Thu Jul 10 04:47:05 2008
0.63% done, estimate finish Thu Jul 10 04:47:05 2008
0.65% done, estimate finish Thu Jul 10 04:47:05 2008
0.68% done, estimate finish Thu Jul 10 04:47:05 2008
0.70% done, estimate finish Thu Jul 10 04:47:05 2008
0.72% done, estimate finish Thu Jul 10 04:47:05 2008
0.74% done, estimate finish Thu Jul 10 05:07:16 2008
0.77% done, estimate finish Thu Jul 10 05:06:39 2008
0.79% done, estimate finish Thu Jul 10 05:06:06 2008
0.81% done, estimate finish Thu Jul 10 05:07:38 2008
0.83% done, estimate finish Thu Jul 10 05:07:05 2008
0.86% done, estimate finish Thu Jul 10 05:06:33 2008
0.88% done, estimate finish Thu Jul 10 05:06:03 2008
0.90% done, estimate finish Thu Jul 10 05:05:35 2008
0.92% done, estimate finish Thu Jul 10 05:06:56 2008
0.95% done, estimate finish Thu Jul 10 05:06:27 2008
0.97% done, estimate finish Thu Jul 10 05:06:00 2008
0.99% done, estimate finish Thu Jul 10 05:05:35 2008
1.01% done, estimate finish Thu Jul 10 05:05:10 2008
1.04% done, estimate finish Thu Jul 10 05:06:23 2008
1.06% done, estimate finish Thu Jul 10 05:05:58 2008
1.08% done, estimate finish Thu Jul 10 05:05:35 2008
1.10% done, estimate finish Thu Jul 10 05:05:12 2008
1.13% done, estimate finish Thu Jul 10 05:04:50 2008
1.15% done, estimate finish Thu Jul 10 05:04:29 2008
1.17% done, estimate finish Thu Jul 10 05:05:35 2008
1.19% done, estimate finish Thu Jul 10 05:05:14 2008
1.22% done, estimate finish Thu Jul 10 05:04:53 2008
1.24% done, estimate finish Thu Jul 10 05:04:34 2008
1.26% done, estimate finish Thu Jul 10 05:04:16 2008
1.28% done, estimate finish Thu Jul 10 05:05:16 2008
1.31% done, estimate finish Thu Jul 10 05:04:56 2008
1.33% done, estimate finish Thu Jul 10 05:04:38 2008
1.35% done, estimate finish Thu Jul 10 05:04:21 2008
1.37% done, estimate finish Thu Jul 10 05:04:04 2008
1.40% done, estimate finish Thu Jul 10 05:03:47 2008
1.42% done, estimate finish Thu Jul 10 05:04:42 2008
1.44% done, estimate finish Thu Jul 10 05:04:25 2008
1.46% done, estimate finish Thu Jul 10 05:04:10 2008
1.49% done, estimate finish Thu Jul 10 05:03:54 2008
1.51% done, estimate finish Thu Jul 10 05:03:39 2008
1.53% done, estimate finish Thu Jul 10 05:04:30 2008
1.55% done, estimate finish Thu Jul 10 05:04:15 2008
1.58% done, estimate finish Thu Jul 10 05:03:59 2008
1.60% done, estimate finish Thu Jul 10 05:03:45 2008
1.62% done, estimate finish Thu Jul 10 05:03:32 2008
1.64% done, estimate finish Thu Jul 10 05:03:18 2008
1.67% done, estimate finish Thu Jul 10 05:04:05 2008
1.69% done, estimate finish Thu Jul 10 05:03:51 2008
1.71% done, estimate finish Thu Jul 10 05:03:38 2008
1.73% done, estimate finish Thu Jul 10 05:03:25 2008
1.76% done, estimate finish Thu Jul 10 05:03:12 2008
1.78% done, estimate finish Thu Jul 10 05:03:56 2008
1.80% done, estimate finish Thu Jul 10 05:03:44 2008
1.82% done, estimate finish Thu Jul 10 05:03:32 2008
1.85% done, estimate finish Thu Jul 10 05:03:19 2008
1.87% done, estimate finish Thu Jul 10 05:03:08 2008
1.89% done, estimate finish Thu Jul 10 05:03:49 2008
1.91% done, estimate finish Thu Jul 10 05:03:37 2008
1.94% done, estimate finish Thu Jul 10 05:03:26 2008
1.96% done, estimate finish Thu Jul 10 05:03:14 2008
1.98% done, estimate finish Thu Jul 10 05:03:04 2008
2.00% done, estimate finish Thu Jul 10 05:02:53 2008
2.03% done, estimate finish Thu Jul 10 05:03:31 2008
2.05% done, estimate finish Thu Jul 10 05:03:21 2008
2.07% done, estimate finish Thu Jul 10 05:03:10 2008
2.09% done, estimate finish Thu Jul 10 05:03:00 2008
2.12% done, estimate finish Thu Jul 10 05:02:49 2008
2.14% done, estimate finish Thu Jul 10 05:03:26 2008
2.16% done, estimate finish Thu Jul 10 05:03:16 2008
2.18% done, estimate finish Thu Jul 10 05:03:06 2008
2.21% done, estimate finish Thu Jul 10 05:02:56 2008
2.23% done, estimate finish Thu Jul 10 05:02:47 2008
2.25% done, estimate finish Thu Jul 10 05:02:37 2008
2.27% done, estimate finish Thu Jul 10 05:03:12 2008
2.30% done, estimate finish Thu Jul 10 05:03:02 2008
2.32% done, estimate finish Thu Jul 10 05:02:53 2008
2.34% done, estimate finish Thu Jul 10 05:02:44 2008
2.36% done, estimate finish Thu Jul 10 05:02:35 2008
2.39% done, estimate finish Thu Jul 10 05:03:08 2008
2.41% done, estimate finish Thu Jul 10 05:02:59 2008
2.43% done, estimate finish Thu Jul 10 05:02:50 2008
2.45% done, estimate finish Thu Jul 10 05:02:42 2008
2.48% done, estimate finish Thu Jul 10 05:02:33 2008
2.50% done, estimate finish Thu Jul 10 05:02:25 2008
2.52% done, estimate finish Thu Jul 10 05:02:56 2008
2.54% done, estimate finish Thu Jul 10 05:02:48 2008
2.57% done, estimate finish Thu Jul 10 05:02:39 2008
2.59% done, estimate finish Thu Jul 10 05:02:31 2008
2.61% done, estimate finish Thu Jul 10 05:02:24 2008
2.63% done, estimate finish Thu Jul 10 05:02:54 2008
2.66% done, estimate finish Thu Jul 10 05:02:45 2008
2.68% done, estimate finish Thu Jul 10 05:02:38 2008
2.70% done, estimate finish Thu Jul 10 05:02:30 2008
2.72% done, estimate finish Thu Jul 10 05:02:22 2008
2.75% done, estimate finish Thu Jul 10 05:02:51 2008
2.77% done, estimate finish Thu Jul 10 05:02:43 2008
2.79% done, estimate finish Thu Jul 10 05:02:36 2008
2.81% done, estimate finish Thu Jul 10 05:02:28 2008
2.84% done, estimate finish Thu Jul 10 05:02:21 2008
2.86% done, estimate finish Thu Jul 10 05:02:14 2008
2.88% done, estimate finish Thu Jul 10 05:02:41 2008
2.90% done, estimate finish Thu Jul 10 05:02:34 2008
2.93% done, estimate finish Thu Jul 10 05:02:27 2008
2.95% done, estimate finish Thu Jul 10 05:02:20 2008
2.97% done, estimate finish Thu Jul 10 05:02:13 2008
2.99% done, estimate finish Thu Jul 10 05:02:40 2008
3.02% done, estimate finish Thu Jul 10 05:02:33 2008
3.04% done, estimate finish Thu Jul 10 05:02:26 2008
3.06% done, estimate finish Thu Jul 10 05:02:19 2008
3.08% done, estimate finish Thu Jul 10 05:02:12 2008
3.11% done, estimate finish Thu Jul 10 05:02:06 2008
3.13% done, estimate finish Thu Jul 10 05:02:31 2008
3.15% done, estimate finish Thu Jul 10 05:02:25 2008
3.17% done, estimate finish Thu Jul 10 05:02:18 2008
3.20% done, estimate finish Thu Jul 10 05:02:12 2008
3.22% done, estimate finish Thu Jul 10 05:02:05 2008
3.24% done, estimate finish Thu Jul 10 05:02:30 2008
3.26% done, estimate finish Thu Jul 10 05:02:24 2008
3.29% done, estimate finish Thu Jul 10 05:02:17 2008
3.31% done, estimate finish Thu Jul 10 05:02:11 2008
3.33% done, estimate finish Thu Jul 10 05:02:05 2008
3.35% done, estimate finish Thu Jul 10 05:01:59 2008
3.38% done, estimate finish Thu Jul 10 05:02:22 2008
3.40% done, estimate finish Thu Jul 10 05:02:16 2008
3.42% done, estimate finish Thu Jul 10 05:02:10 2008
3.44% done, estimate finish Thu Jul 10 05:02:05 2008
3.47% done, estimate finish Thu Jul 10 05:01:59 2008
3.49% done, estimate finish Thu Jul 10 05:02:21 2008
3.51% done, estimate finish Thu Jul 10 05:02:16 2008
3.53% done, estimate finish Thu Jul 10 05:02:10 2008
3.56% done, estimate finish Thu Jul 10 05:02:04 2008
3.58% done, estimate finish Thu Jul 10 05:01:58 2008
3.60% done, estimate finish Thu Jul 10 05:02:21 2008
3.62% done, estimate finish Thu Jul 10 05:02:15 2008
3.65% done, estimate finish Thu Jul 10 05:02:09 2008
3.67% done, estimate finish Thu Jul 10 05:02:04 2008
3.69% done, estimate finish Thu Jul 10 05:01:58 2008
3.71% done, estimate finish Thu Jul 10 05:01:53 2008
3.74% done, estimate finish Thu Jul 10 05:02:14 2008
3.76% done, estimate finish Thu Jul 10 05:02:09 2008
3.78% done, estimate finish Thu Jul 10 05:02:03 2008
3.80% done, estimate finish Thu Jul 10 05:01:58 2008
3.83% done, estimate finish Thu Jul 10 05:01:53 2008
3.85% done, estimate finish Thu Jul 10 05:02:14 2008
3.87% done, estimate finish Thu Jul 10 05:02:08 2008
3.89% done, estimate finish Thu Jul 10 05:02:03 2008
3.92% done, estimate finish Thu Jul 10 05:01:58 2008
3.94% done, estimate finish Thu Jul 10 05:01:53 2008
3.96% done, estimate finish Thu Jul 10 05:01:48 2008
3.98% done, estimate finish Thu Jul 10 05:02:08 2008
4.01% done, estimate finish Thu Jul 10 05:02:03 2008
4.03% done, estimate finish Thu Jul 10 05:01:58 2008
4.05% done, estimate finish Thu Jul 10 05:01:53 2008
4.07% done, estimate finish Thu Jul 10 05:01:48 2008
4.10% done, estimate finish Thu Jul 10 05:02:07 2008
4.12% done, estimate finish Thu Jul 10 05:02:03 2008
4.14% done, estimate finish Thu Jul 10 05:01:58 2008
4.16% done, estimate finish Thu Jul 10 05:01:53 2008
4.19% done, estimate finish Thu Jul 10 05:01:48 2008
4.21% done, estimate finish Thu Jul 10 05:01:43 2008

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid TV-saated -volset -appid K3B THE
CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX
-volset-size 1 -volset-seqno 1 -sort /tmp/kde-edmund/k3b2luKya.tmp -rational-rock -hide-list
/tmp/kde-edmund/k3bqct3sa.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-edmund/k3bsCX7Xb.tmp
-no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-edmund/k3bvoRgDb.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid TV-saated -volset -appid K3B THE CD KREATOR (C)
1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1
-volset-seqno 1 -sort /tmp/kde-edmund/k3bN3ulKa.tmp -rational-rock -hide-list
/tmp/kde-edmund/k3bcTs67a.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-edmund/k3bCAZhqa.tmp
-no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-edmund/k3bp3782b.tmp

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
K3b-user mailing list
K3b-user@...
https://lists.sourceforge.net/lists/listinfo/k3b-user

From forum: k3b-user