Fwd: ZigGis 1.1 available!

View: New views
10 Messages — Rating Filter:   Alert me  

Parent Message unknown Fwd: ZigGis 1.1 available!

by Abe Gillespie :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hello All,

Good news, Paolo has created an installer for zigGIS.  Read the
forward below for instructions.

I will be testing 9.2 over the holiday.  Currently the installer has
been tested against 9.0 and 9.1.

Thank you Paolo for the great work!

-Abe

---------- Forwarded message ----------
From: Paolo Corti <pcorti@...>
Date: Dec 19, 2006 1:40 PM
Subject: ZigGis 1.1 available!
To: zigGIS <ziggis@...>



Hi

we just checked in the source code of ZigGis (release 1.1).

source code can be checked out at this address:

http://ziggis.googlecode.com/svn/

People just interested in downloading and install ZigGis can just
download the installer, that can be found here:

http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip

ZigGis 1.1 was tested with ArcGis Desktop 9.0 and 9.1 and with PostGis
1.0

Known issues are tracked here, if you find more or want some
improvement fell free to add them here:
http://code.google.com/p/ziggis/issues/list

Good Luck

Paolo Corti
http://www.paolocorti.net


--~--~---------~--~----~------------~-------~--~----~
 You received this message because you are subscribed to the Google
Groups "zigGIS" group.
To post to this group, send email to ziggis@...
To unsubscribe from this group, send email to
ziggis-unsubscribe@...
For more options, visit this group at
http://groups.google.com/group/ziggis?hl=en
-~----------~----~----~----~------~----~------~--~---
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by Jan Hartmann :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Great! This will be a big boost for PostGIS. If this works OK I'm going
to put it into our ArcGIS courses over here.

Nice Christmas present. Thanks again, Abe and Paolo.

Jan

Dr. J. Hartmann
Department of Geography
University of Amsterdam

PS: And if someone could do the same thing for MapInfo .....


Abe Gillespie wrote:

> Hello All,
>
> Good news, Paolo has created an installer for zigGIS.  Read the
> forward below for instructions.
>
> I will be testing 9.2 over the holiday.  Currently the installer has
> been tested against 9.0 and 9.1.
>
> Thank you Paolo for the great work!
>
> -Abe
>
> ---------- Forwarded message ----------
> From: Paolo Corti <pcorti@...>
> Date: Dec 19, 2006 1:40 PM
> Subject: ZigGis 1.1 available!
> To: zigGIS <ziggis@...>
>
>
>
> Hi
>
> we just checked in the source code of ZigGis (release 1.1).
>
> source code can be checked out at this address:
>
> http://ziggis.googlecode.com/svn/
>
> People just interested in downloading and install ZigGis can just
> download the installer, that can be found here:
>
> http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip
>
> ZigGis 1.1 was tested with ArcGis Desktop 9.0 and 9.1 and with PostGis
> 1.0
>
> Known issues are tracked here, if you find more or want some
> improvement fell free to add them here:
> http://code.google.com/p/ziggis/issues/list
>
> Good Luck
>
> Paolo Corti
> http://www.paolocorti.net
>
>
> --~--~---------~--~----~------------~-------~--~----~
> You received this message because you are subscribed to the Google
> Groups "zigGIS" group.
> To post to this group, send email to ziggis@...
> To unsubscribe from this group, send email to
> ziggis-unsubscribe@...
> For more options, visit this group at
> http://groups.google.com/group/ziggis?hl=en
> -~----------~----~----~----~------~----~------~--~---
> _______________________________________________
> postgis-users mailing list
> postgis-users@...
> http://postgis.refractions.net/mailman/listinfo/postgis-users
>

_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by marco vieira-3 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Sorry for the off topic but the installer fails for me: I get the follow error:

Unable to get installer types in ...\Pulp.ArcGis.ZigGis.Button.dll assembly -->Unable to load one or more of the requested  types. Retrieve the LoaderExceptions property for more information.

Using WinXP 5.1.2600 Service Pack 1 and ArcGIS Desktop 9.1 (build 722)

Thanks.

--
Marco Vieira
+55 21 9499-6800
e-mail: maovieira@...


2006/12/20, Jan Hartmann <j.l.h.hartmann@...>:
Great! This will be a big boost for PostGIS. If this works OK I'm going
to put it into our ArcGIS courses over here.

Nice Christmas present. Thanks again, Abe and Paolo.

Jan

Dr. J. Hartmann
Department of Geography
University of Amsterdam

PS: And if someone could do the same thing for MapInfo .....


Abe Gillespie wrote:
> Hello All,
>
> Good news, Paolo has created an installer for zigGIS.  Read the
> forward below for instructions.
>
> I will be testing 9.2 over the holiday.  Currently the installer has
> been tested against 9.0 and 9.1.
>
> Thank you Paolo for the great work!
>

> -Abe
>
> ---------- Forwarded message ----------
> From: Paolo Corti <pcorti@...>
> Date: Dec 19, 2006 1:40 PM
> Subject: ZigGis 1.1 available!
> To: zigGIS <ziggis@...>
>
>
>
> Hi
>
> we just checked in the source code of ZigGis (release 1.1).
>
> source code can be checked out at this address:
>
> http://ziggis.googlecode.com/svn/
>
> People just interested in downloading and install ZigGis can just
> download the installer, that can be found here:
>
> http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip
>
> ZigGis 1.1 was tested with ArcGis Desktop 9.0 and 9.1 and with PostGis
> 1.0
>
> Known issues are tracked here, if you find more or want some
> improvement fell free to add them here:
> http://code.google.com/p/ziggis/issues/list
>
> Good Luck
>
> Paolo Corti
> http://www.paolocorti.net
>
>
> --~--~---------~--~----~------------~-------~--~----~
> You received this message because you are subscribed to the Google
> Groups "zigGIS" group.
> To post to this group, send email to ziggis@...
> To unsubscribe from this group, send email to
> ziggis-unsubscribe@...
> For more options, visit this group at
> http://groups.google.com/group/ziggis?hl=en
> -~----------~----~----~----~------~----~------~--~---
> _______________________________________________
> postgis-users mailing list
> postgis-users@...
> http://postgis.refractions.net/mailman/listinfo/postgis-users
>

_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users




_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by Abe Gillespie :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hey Marco,

It would probably be better for this sorta discussion to occur on the
zigGIS list.  But I will say that Paolo did the installer so you might
want to email him directly.

-Abe

On 12/20/06, marco vieira <maovieira@...> wrote:

> Sorry for the off topic but the installer fails for me: I get the follow
> error:
>
> Unable to get installer types in
> ...\Pulp.ArcGis.ZigGis.Button.dll assembly -->Unable to
> load one or more of the requested  types. Retrieve the LoaderExceptions
> property for more information.
>
> Using WinXP 5.1.2600 Service Pack 1 and ArcGIS Desktop 9.1 (build 722)
>
> Thanks.
>
> --
> Marco Vieira
> +55 21 9499-6800
> e-mail: maovieira@...
>
>
> 2006/12/20, Jan Hartmann <j.l.h.hartmann@...>:
> > Great! This will be a big boost for PostGIS. If this works OK I'm going
> > to put it into our ArcGIS courses over here.
> >
> > Nice Christmas present. Thanks again, Abe and Paolo.
> >
> > Jan
> >
> > Dr. J. Hartmann
> > Department of Geography
> > University of Amsterdam
> >
> > PS: And if someone could do the same thing for MapInfo .....
> >
> >
> > Abe Gillespie wrote:
> > > Hello All,
> > >
> > > Good news, Paolo has created an installer for zigGIS.  Read the
> > > forward below for instructions.
> > >
> > > I will be testing 9.2 over the holiday.  Currently the installer has
> > > been tested against 9.0 and 9.1.
> > >
> > > Thank you Paolo for the great work!
> > >
> > > -Abe
> > >
> > > ---------- Forwarded message ----------
> > > From: Paolo Corti <pcorti@...>
> > > Date: Dec 19, 2006 1:40 PM
> > > Subject: ZigGis 1.1 available!
> > > To: zigGIS <ziggis@...>
> > >
> > >
> > >
> > > Hi
> > >
> > > we just checked in the source code of ZigGis (release 1.1).
> > >
> > > source code can be checked out at this address:
> > >
> > > http://ziggis.googlecode.com/svn/
> > >
> > > People just interested in downloading and install ZigGis can just
> > > download the installer, that can be found here:
> > >
> > >
> http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip
> > >
> > > ZigGis 1.1 was tested with ArcGis Desktop 9.0 and 9.1 and with PostGis
> > > 1.0
> > >
> > > Known issues are tracked here, if you find more or want some
> > > improvement fell free to add them here:
> > > http://code.google.com/p/ziggis/issues/list
> > >
> > > Good Luck
> > >
> > > Paolo Corti
> > > http://www.paolocorti.net
> > >
> > >
> > > --~--~---------~--~----~------------~-------~--~----~
> > > You received this message because you are subscribed to the Google
> > > Groups "zigGIS" group.
> > > To post to this group, send email to ziggis@...
> > > To unsubscribe from this group, send email to
> > > ziggis-unsubscribe@...
> > > For more options, visit this group at
> > > http://groups.google.com/group/ziggis?hl=en
> > > -~----------~----~----~----~------~----~------~--~---
> > > _______________________________________________
> > > postgis-users mailing list
> > > postgis-users@...
> > >
> http://postgis.refractions.net/mailman/listinfo/postgis-users
> > >
> >
> > _______________________________________________
> > postgis-users mailing list
> > postgis-users@...
> >
> http://postgis.refractions.net/mailman/listinfo/postgis-users
> >
>
>
>
>
> _______________________________________________
> postgis-users mailing list
> postgis-users@...
> http://postgis.refractions.net/mailman/listinfo/postgis-users
>
>
>
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by Dylan Beaudette-2 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi Abe and others,


Is there a binary install of this?  My advisor (Win+Arc user) would really
like to directly connect to our postgis data!!

cheers,

Dylan

On Wednesday 20 December 2006 12:40, Abe Gillespie wrote:

> Hey Marco,
>
> It would probably be better for this sorta discussion to occur on the
> zigGIS list.  But I will say that Paolo did the installer so you might
> want to email him directly.
>
> -Abe
>
> On 12/20/06, marco vieira <maovieira@...> wrote:
> > Sorry for the off topic but the installer fails for me: I get the follow
> > error:
> >
> > Unable to get installer types in
> > ...\Pulp.ArcGis.ZigGis.Button.dll assembly -->Unable to
> > load one or more of the requested  types. Retrieve the LoaderExceptions
> > property for more information.
> >
> > Using WinXP 5.1.2600 Service Pack 1 and ArcGIS Desktop 9.1 (build 722)
> >
> > Thanks.
> >
> > --
> > Marco Vieira
> > +55 21 9499-6800
> > e-mail: maovieira@...
> >
> > 2006/12/20, Jan Hartmann <j.l.h.hartmann@...>:
> > > Great! This will be a big boost for PostGIS. If this works OK I'm going
> > > to put it into our ArcGIS courses over here.
> > >
> > > Nice Christmas present. Thanks again, Abe and Paolo.
> > >
> > > Jan
> > >
> > > Dr. J. Hartmann
> > > Department of Geography
> > > University of Amsterdam
> > >
> > > PS: And if someone could do the same thing for MapInfo .....
> > >
> > > Abe Gillespie wrote:
> > > > Hello All,
> > > >
> > > > Good news, Paolo has created an installer for zigGIS.  Read the
> > > > forward below for instructions.
> > > >
> > > > I will be testing 9.2 over the holiday.  Currently the installer has
> > > > been tested against 9.0 and 9.1.
> > > >
> > > > Thank you Paolo for the great work!
> > > >
> > > > -Abe
> > > >
> > > > ---------- Forwarded message ----------
> > > > From: Paolo Corti <pcorti@...>
> > > > Date: Dec 19, 2006 1:40 PM
> > > > Subject: ZigGis 1.1 available!
> > > > To: zigGIS <ziggis@...>
> > > >
> > > >
> > > >
> > > > Hi
> > > >
> > > > we just checked in the source code of ZigGis (release 1.1).
> > > >
> > > > source code can be checked out at this address:
> > > >
> > > > http://ziggis.googlecode.com/svn/
> > > >
> > > > People just interested in downloading and install ZigGis can just
> > > > download the installer, that can be found here:
> >
> > http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip
> >
> > > > ZigGis 1.1 was tested with ArcGis Desktop 9.0 and 9.1 and with
> > > > PostGis 1.0
> > > >
> > > > Known issues are tracked here, if you find more or want some
> > > > improvement fell free to add them here:
> > > > http://code.google.com/p/ziggis/issues/list
> > > >
> > > > Good Luck
> > > >
> > > > Paolo Corti
> > > > http://www.paolocorti.net
> > > >
> > > >
> > > > --~--~---------~--~----~------------~-------~--~----~
> > > > You received this message because you are subscribed to the Google
> > > > Groups "zigGIS" group.
> > > > To post to this group, send email to ziggis@...
> > > > To unsubscribe from this group, send email to
> > > > ziggis-unsubscribe@...
> > > > For more options, visit this group at
> > > > http://groups.google.com/group/ziggis?hl=en
> > > > -~----------~----~----~----~------~----~------~--~---
> > > > _______________________________________________
> > > > postgis-users mailing list
> > > > postgis-users@...
> >
> > http://postgis.refractions.net/mailman/listinfo/postgis-users
> >
> > > _______________________________________________
> > > postgis-users mailing list
> > > postgis-users@...
> >
> > http://postgis.refractions.net/mailman/listinfo/postgis-users
> >
> >
> >
> >
> >
> > _______________________________________________
> > postgis-users mailing list
> > postgis-users@...
> > http://postgis.refractions.net/mailman/listinfo/postgis-users
>
> _______________________________________________
> postgis-users mailing list
> postgis-users@...
> http://postgis.refractions.net/mailman/listinfo/postgis-users

--
Dylan Beaudette
Soils and Biogeochemistry Graduate Group
University of California at Davis
530.754.7341
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by Abe Gillespie :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Yep, that's what Paolo has graciously put together:

http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip

-Abe

On 12/20/06, Dylan Beaudette <dylan.beaudette@...> wrote:

> Hi Abe and others,
>
>
> Is there a binary install of this?  My advisor (Win+Arc user) would really
> like to directly connect to our postgis data!!
>
> cheers,
>
> Dylan
>
> On Wednesday 20 December 2006 12:40, Abe Gillespie wrote:
> > Hey Marco,
> >
> > It would probably be better for this sorta discussion to occur on the
> > zigGIS list.  But I will say that Paolo did the installer so you might
> > want to email him directly.
> >
> > -Abe
> >
> > On 12/20/06, marco vieira <maovieira@...> wrote:
> > > Sorry for the off topic but the installer fails for me: I get the follow
> > > error:
> > >
> > > Unable to get installer types in
> > > ...\Pulp.ArcGis.ZigGis.Button.dll assembly -->Unable to
> > > load one or more of the requested  types. Retrieve the LoaderExceptions
> > > property for more information.
> > >
> > > Using WinXP 5.1.2600 Service Pack 1 and ArcGIS Desktop 9.1 (build 722)
> > >
> > > Thanks.
> > >
> > > --
> > > Marco Vieira
> > > +55 21 9499-6800
> > > e-mail: maovieira@...
> > >
> > > 2006/12/20, Jan Hartmann <j.l.h.hartmann@...>:
> > > > Great! This will be a big boost for PostGIS. If this works OK I'm going
> > > > to put it into our ArcGIS courses over here.
> > > >
> > > > Nice Christmas present. Thanks again, Abe and Paolo.
> > > >
> > > > Jan
> > > >
> > > > Dr. J. Hartmann
> > > > Department of Geography
> > > > University of Amsterdam
> > > >
> > > > PS: And if someone could do the same thing for MapInfo .....
> > > >
> > > > Abe Gillespie wrote:
> > > > > Hello All,
> > > > >
> > > > > Good news, Paolo has created an installer for zigGIS.  Read the
> > > > > forward below for instructions.
> > > > >
> > > > > I will be testing 9.2 over the holiday.  Currently the installer has
> > > > > been tested against 9.0 and 9.1.
> > > > >
> > > > > Thank you Paolo for the great work!
> > > > >
> > > > > -Abe
> > > > >
> > > > > ---------- Forwarded message ----------
> > > > > From: Paolo Corti <pcorti@...>
> > > > > Date: Dec 19, 2006 1:40 PM
> > > > > Subject: ZigGis 1.1 available!
> > > > > To: zigGIS <ziggis@...>
> > > > >
> > > > >
> > > > >
> > > > > Hi
> > > > >
> > > > > we just checked in the source code of ZigGis (release 1.1).
> > > > >
> > > > > source code can be checked out at this address:
> > > > >
> > > > > http://ziggis.googlecode.com/svn/
> > > > >
> > > > > People just interested in downloading and install ZigGis can just
> > > > > download the installer, that can be found here:
> > >
> > > http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip
> > >
> > > > > ZigGis 1.1 was tested with ArcGis Desktop 9.0 and 9.1 and with
> > > > > PostGis 1.0
> > > > >
> > > > > Known issues are tracked here, if you find more or want some
> > > > > improvement fell free to add them here:
> > > > > http://code.google.com/p/ziggis/issues/list
> > > > >
> > > > > Good Luck
> > > > >
> > > > > Paolo Corti
> > > > > http://www.paolocorti.net
> > > > >
> > > > >
> > > > > --~--~---------~--~----~------------~-------~--~----~
> > > > > You received this message because you are subscribed to the Google
> > > > > Groups "zigGIS" group.
> > > > > To post to this group, send email to ziggis@...
> > > > > To unsubscribe from this group, send email to
> > > > > ziggis-unsubscribe@...
> > > > > For more options, visit this group at
> > > > > http://groups.google.com/group/ziggis?hl=en
> > > > > -~----------~----~----~----~------~----~------~--~---
> > > > > _______________________________________________
> > > > > postgis-users mailing list
> > > > > postgis-users@...
> > >
> > > http://postgis.refractions.net/mailman/listinfo/postgis-users
> > >
> > > > _______________________________________________
> > > > postgis-users mailing list
> > > > postgis-users@...
> > >
> > > http://postgis.refractions.net/mailman/listinfo/postgis-users
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > postgis-users mailing list
> > > postgis-users@...
> > > http://postgis.refractions.net/mailman/listinfo/postgis-users
> >
> > _______________________________________________
> > postgis-users mailing list
> > postgis-users@...
> > http://postgis.refractions.net/mailman/listinfo/postgis-users
>
> --
> Dylan Beaudette
> Soils and Biogeochemistry Graduate Group
> University of California at Davis
> 530.754.7341
>
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by Dylan Beaudette-2 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Thanks Abe,

I was looking at the old ZigGIS 0.2 page...

Cheers,

Dylan

PS: will give it a try today, and report back!

On Wednesday 20 December 2006 13:26, Abe Gillespie wrote:

> Yep, that's what Paolo has graciously put together:
>
> http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip
>
> -Abe
>
> On 12/20/06, Dylan Beaudette <dylan.beaudette@...> wrote:
> > Hi Abe and others,
> >
> >
> > Is there a binary install of this?  My advisor (Win+Arc user) would
> > really like to directly connect to our postgis data!!
> >
> > cheers,
> >
> > Dylan
> >
> > On Wednesday 20 December 2006 12:40, Abe Gillespie wrote:
> > > Hey Marco,
> > >
> > > It would probably be better for this sorta discussion to occur on the
> > > zigGIS list.  But I will say that Paolo did the installer so you might
> > > want to email him directly.
> > >
> > > -Abe
> > >
> > > On 12/20/06, marco vieira <maovieira@...> wrote:
> > > > Sorry for the off topic but the installer fails for me: I get the
> > > > follow error:
> > > >
> > > > Unable to get installer types in
> > > > ...\Pulp.ArcGis.ZigGis.Button.dll assembly -->Unable to
> > > > load one or more of the requested  types. Retrieve the
> > > > LoaderExceptions property for more information.
> > > >
> > > > Using WinXP 5.1.2600 Service Pack 1 and ArcGIS Desktop 9.1 (build
> > > > 722)
> > > >
> > > > Thanks.
> > > >
> > > > --
> > > > Marco Vieira
> > > > +55 21 9499-6800
> > > > e-mail: maovieira@...
> > > >
> > > > 2006/12/20, Jan Hartmann <j.l.h.hartmann@...>:
> > > > > Great! This will be a big boost for PostGIS. If this works OK I'm
> > > > > going to put it into our ArcGIS courses over here.
> > > > >
> > > > > Nice Christmas present. Thanks again, Abe and Paolo.
> > > > >
> > > > > Jan
> > > > >
> > > > > Dr. J. Hartmann
> > > > > Department of Geography
> > > > > University of Amsterdam
> > > > >
> > > > > PS: And if someone could do the same thing for MapInfo .....
> > > > >
> > > > > Abe Gillespie wrote:
> > > > > > Hello All,
> > > > > >
> > > > > > Good news, Paolo has created an installer for zigGIS.  Read the
> > > > > > forward below for instructions.
> > > > > >
> > > > > > I will be testing 9.2 over the holiday.  Currently the installer
> > > > > > has been tested against 9.0 and 9.1.
> > > > > >
> > > > > > Thank you Paolo for the great work!
> > > > > >
> > > > > > -Abe
> > > > > >
> > > > > > ---------- Forwarded message ----------
> > > > > > From: Paolo Corti <pcorti@...>
> > > > > > Date: Dec 19, 2006 1:40 PM
> > > > > > Subject: ZigGis 1.1 available!
> > > > > > To: zigGIS <ziggis@...>
> > > > > >
> > > > > >
> > > > > >
> > > > > > Hi
> > > > > >
> > > > > > we just checked in the source code of ZigGis (release 1.1).
> > > > > >
> > > > > > source code can be checked out at this address:
> > > > > >
> > > > > > http://ziggis.googlecode.com/svn/
> > > > > >
> > > > > > People just interested in downloading and install ZigGis can just
> > > > > > download the installer, that can be found here:
> > > >
> > > > http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip
> > > >
> > > > > > ZigGis 1.1 was tested with ArcGis Desktop 9.0 and 9.1 and with
> > > > > > PostGis 1.0
> > > > > >
> > > > > > Known issues are tracked here, if you find more or want some
> > > > > > improvement fell free to add them here:
> > > > > > http://code.google.com/p/ziggis/issues/list
> > > > > >
> > > > > > Good Luck
> > > > > >
> > > > > > Paolo Corti
> > > > > > http://www.paolocorti.net
> > > > > >
> > > > > >
> > > > > > --~--~---------~--~----~------------~-------~--~----~
> > > > > > You received this message because you are subscribed to the
> > > > > > Google Groups "zigGIS" group.
> > > > > > To post to this group, send email to ziggis@...
> > > > > > To unsubscribe from this group, send email to
> > > > > > ziggis-unsubscribe@...
> > > > > > For more options, visit this group at
> > > > > > http://groups.google.com/group/ziggis?hl=en
> > > > > > -~----------~----~----~----~------~----~------~--~---
> > > > > > _______________________________________________
> > > > > > postgis-users mailing list
> > > > > > postgis-users@...
> > > >
> > > > http://postgis.refractions.net/mailman/listinfo/postgis-users
> > > >
> > > > > _______________________________________________
> > > > > postgis-users mailing list
> > > > > postgis-users@...
> > > >
> > > > http://postgis.refractions.net/mailman/listinfo/postgis-users
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > postgis-users mailing list
> > > > postgis-users@...
> > > > http://postgis.refractions.net/mailman/listinfo/postgis-users
> > >
> > > _______________________________________________
> > > postgis-users mailing list
> > > postgis-users@...
> > > http://postgis.refractions.net/mailman/listinfo/postgis-users
> >
> > --
> > Dylan Beaudette
> > Soils and Biogeochemistry Graduate Group
> > University of California at Davis
> > 530.754.7341

--
Dylan Beaudette
Soils and Biogeochemistry Graduate Group
University of California at Davis
530.754.7341
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by Dylan Beaudette-2 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

On Wednesday 20 December 2006 12:26, marco vieira wrote:

> Sorry for the off topic but the installer fails for me: I get the follow
> error:
>
> Unable to get installer types in ...\Pulp.ArcGis.ZigGis.Button.dll assembly
> -->Unable to load one or more of the requested  types. Retrieve the
> LoaderExceptions property for more information.
>
> Using WinXP 5.1.2600 Service Pack 1 and ArcGIS Desktop 9.1 (build 722)
>
> Thanks.

I have a similar setup, and got the same error messages when trying to
install... ?

Cheers,

--
Dylan Beaudette
Soils and Biogeochemistry Graduate Group
University of California at Davis
530.754.7341
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by Abe Gillespie :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Paolo's in Italy and probably getting close to bed time.  I'm sure
he'll be happy to look at it as soon as he can.

Thanks for you patience.
-Abe

On 12/20/06, Dylan Beaudette <dylan.beaudette@...> wrote:

> On Wednesday 20 December 2006 12:26, marco vieira wrote:
> > Sorry for the off topic but the installer fails for me: I get the follow
> > error:
> >
> > Unable to get installer types in ...\Pulp.ArcGis.ZigGis.Button.dll assembly
> > -->Unable to load one or more of the requested  types. Retrieve the
> > LoaderExceptions property for more information.
> >
> > Using WinXP 5.1.2600 Service Pack 1 and ArcGIS Desktop 9.1 (build 722)
> >
> > Thanks.
>
> I have a similar setup, and got the same error messages when trying to
> install... ?
>
> Cheers,
>
> --
> Dylan Beaudette
> Soils and Biogeochemistry Graduate Group
> University of California at Davis
> 530.754.7341
> _______________________________________________
> postgis-users mailing list
> postgis-users@...
> http://postgis.refractions.net/mailman/listinfo/postgis-users
>
_______________________________________________
postgis-users mailing list
postgis-users@...
http://postgis.refractions.net/mailman/listinfo/postgis-users

Re: Fwd: ZigGis 1.1 available!

by Paolo Corti :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi all

I just added at ZigGis web site, http://code.google.com/p/ziggis/, then installation quick steps for ZigGis.

People having trouble is mainly because they need to install before ZigGis the .NET 2.0 runtime and/or the ArcObjects .NET assemblies.

Please for support, help, and feedback, do not use this group neither email us directly, but use the ZigGis group: http://groups.google.com/group/ziggis

ZigGis is an ArcGis plug-in that allows loading and viewing of PostGIS layers. The hope is to eventually get ZigGis so that it will also edit PostGIS layers.

The official ZigGis web site is http://code.google.com/p/ziggis/. The old ZigGis web site is no longer supported.

We have imported the svn project (ZigGis 1.1 release) in google code, source code can be checked out at
this address:

http://ziggis.googlecode.com/svn/

*** Want to install and try ZigGis in a while? ***

People just interested in downloading and installing ZigGis can just download the installer, that can be found here:

http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip

Quick installation steps:

ZigGis is developed with .NET 2.0 framework and ArcObject .NET assemblies, so you have to make sure you have both in the computer where you want to install ZigGis.
After having checked and maybe installed both, you can finally install ZigGis.

After intalling ZigGis open ArcMap and go to menu Tools>Customize. In the Customize dialog box browse to Commands tab, and from there select the ZigGis category. Select the 'Add PostGIS layer' and drag & drop it on any ArcMap's toolbar.
Close the dialog and click on the new botton you have in the toolbar.
You will need to provide a zig file, where there are the settings for your PostGis connections.

A sample ZigGis file, example.zig, is provided with the installation, under the ZigGis installation path (default is: C:\Program Files\ZigGis).
You can use this example.zig file or copy it and rename it as you think.

Now open and edit the zig file with your PostGis settings:

; Your PostgreSQL server.
server = localhost
; Your PostgreSQL server's port.
port = 5432
; Your PostGIS database.
database = TUTORIAL
; Your PostGIS user.
user = myuser
; Your PostGIS password.
password = mypassword

Finally from ArcMap, from the PostGis dialog box, browse to the zig file you just created/modified.
In the PostGis Table textbox type the PostGis layer you want to add in ArcMap.
Press ok, and if everything is fine the PostGis layer should be added in ArcMap.

Please consider that this is a very early first releaze of ZigGis, so there maybe be several issues.
Some issues (bad field data types for ArcMap, symbology, editing not let,...) are already being tracked, and we are working in the next weeks to solve them.

You can check the Issues here: http://code.google.com/p/ziggis/issues/list
Feel free to add any issue you get in if it is not in this list, or any request you wish to be implemented in future releases.

For support and help please don't email us or post the help request in the PostGis or Esri forums, but use the ZigGis group: http://groups.google.com/group/ziggis

Thanks,
Paolo Corti
http://www.paolocorti.net


Abe Gillespie wrote:
Hello All,

Good news, Paolo has created an installer for zigGIS.  Read the
forward below for instructions.

I will be testing 9.2 over the holiday.  Currently the installer has
been tested against 9.0 and 9.1.

Thank you Paolo for the great work!

-Abe

---------- Forwarded message ----------
From: Paolo Corti <pcorti@gmail.com>
Date: Dec 19, 2006 1:40 PM
Subject: ZigGis 1.1 available!
To: zigGIS <ziggis@googlegroups.com>



Hi

we just checked in the source code of ZigGis (release 1.1).

source code can be checked out at this address:

http://ziggis.googlecode.com/svn/

People just interested in downloading and install ZigGis can just
download the installer, that can be found here:

http://ziggis.googlecode.com/svn/trunk/download/ZigGis11.zip

ZigGis 1.1 was tested with ArcGis Desktop 9.0 and 9.1 and with PostGis
1.0

Known issues are tracked here, if you find more or want some
improvement fell free to add them here:
http://code.google.com/p/ziggis/issues/list

Good Luck

Paolo Corti
http://www.paolocorti.net


--~--~---------~--~----~------------~-------~--~----~
 You received this message because you are subscribed to the Google
Groups "zigGIS" group.
To post to this group, send email to ziggis@googlegroups.com
To unsubscribe from this group, send email to
ziggis-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/ziggis?hl=en
-~----------~----~----~----~------~----~------~--~---
_______________________________________________
postgis-users mailing list
postgis-users@postgis.refractions.net
http://postgis.refractions.net/mailman/listinfo/postgis-users
LightInTheBox - Buy quality products at wholesale price