|

»

»

T2

Error and no clue where to look

View: New views

5 Messages — Rating Filter: Alert me

	Error and no clue where to look by Matthias Sommer :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Hello, I try to build a T2 system and keep hanging at the linux header package. I tried i686 first, then i486. Before building Download -required to have all files at hand. Cleanup before each new try. I keep hanging here. Where could I look? - - - cut here - - - == 20:52:47 =[0]=> Building base/linux-header [2.6.19.1 7.0-rc2]. -> Reading build/.../tools.cross/lib/pkg_linux-header_pre.conf -> Including SquashFS (3.2) patch ... -> Reading package config: package/base/linux-header/linux-header.conf -> Preparing build in src.linux-header.default.20080105.205244.5937.localhost fl_wrapper.so: write outside basedir (/root/T2): /etc/mtab -> Building. Writing output to $root/var/adm/logs/0-linux-header.out Command Wrapper Debug: running 'gcc --version' .. gcc is /root/T2/build/default-7.0-rc2-generic-x86-i486/TOOLCHAIN/tools.cross/wrapper/gcc Old Command: gcc --version ENVPREFIX = 'CMD' OTHERS = '' INSERT = '--help?:-pipe -Os' REMOVE = '-O -O[0-9s] -mtune* -march* -mcpu* -g' APPEND = '-s' FILTER = '' conditonal arg: --help?:-pipe. conditonal: --help, lhs: , rhs: -pipe. Insert: -pipe Insert: -Os Copy: --version Append: -s Old PATH: /root/T2/build/default-7.0-rc2-generic-x86-i486/TOOLCHAIN/tools.cross/wrapper:/root/T2/build/default-7.0-rc2-generic-x86-i486/TOOLCHAIN/tools.cross/bin:/root/T2/build/default-7.0-rc2-generic-x86-i486/TOOLCHAIN/tools.cross/crosscc:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin New PATH: /root/T2/build/default-7.0-rc2-generic-x86-i486/TOOLCHAIN/tools.cross/bin:/root/T2/build/default-7.0-rc2-generic-x86-i486/TOOLCHAIN/tools.cross/crosscc:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin New Command: gcc -pipe -Os --version -s gcc (GCC) 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0) Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. [ writing debug log to /root/T2/src.linux-header.default.20080105.205244.5937.localhost/cmd_wrapper.log ] `/root/T2/src.linux-header.default.20080105.205244.5937.localhost/archdir/linux-2.6.19.tar.bz2' -> `/root/T2/download/mirror/l/linux-2.6.19.tar.bz2' `/root/T2/src.linux-header.default.20080105.205244.5937.localhost/archdir/patch-2.6.19.2.bz2' -> `/root/T2/download/mirror/p/patch-2.6.19.2.bz2' Running main build function 'build_this_package' ... =[:608 (last $?=0)> cd /root/T2/src.linux-header.default.20080105.205244.5937.localhost =[:608 (last $?=0)> eval build_this_package ==[:608 (last $?=0)> build_this_package ==[build_this_package:764 (last $?=0)> '[' . == . ']' ==[build_this_package:767 (last $?=0)> '[' auto = auto ']' ===[build_this_package:769 (last $?=0)> echo '4108217827 linux-2.6.19.tar.bz2 http://ftp.kernel.org/pub/linux/kernel/v2.6/ 1900964792 patch-2.6.19.2.bz2 http://ftp.kernel.org/pub/linux/kernel/v2.6/' ===[build_this_package:769 (last $?=0)> head -n 1 ===[build_this_package:769 (last $?=0)> tr ' ' '\t' ===[build_this_package:769 (last $?=0)> tr -s '\t' ===[build_this_package:770 (last $?=0)> cut -f2 ===[build_this_package:770 (last $?=0)> bz2filename ===[bz2filename:94 (last $?=0)> local 'pattern=-e s,\.\(t\?\)\(gz\\|Z\)$,.\1bz2,' ===[bz2filename:95 (last $?=0)> pattern='-e s,\.gpg$,, -e s,\.\(t\?\)\(gz\\|Z\)$,.\1bz2,' ===[bz2filename:96 (last $?=0)> pattern='-e s,\.tar$,\.tar.bz2, -e s,\.gpg$,, -e s,\.\(t\?\)\(gz\\|Z\)$,.\1bz2,' ===[bz2filename:98 (last $?=0)> '[' -n '' ']' ===[bz2filename:101 (last $?=1)> sed -e 's,\.tar$,\.tar.bz2,' -e 's,\.gpg$,,' -e 's,\.\(t\?\)\(gz\\|Z\)$,.\1bz2,' ==[build_this_package:769 (last $?=0)> xsourceballs=linux-2.6.19.tar.bz2 ==[build_this_package:770 (last $?=0)> '[' -z linux-2.6.19.tar.bz2 ']' ==[build_this_package:785 (last $?=0)> for xsrctar in '$xsourceballs' ==[build_this_package:786 (last $?=0)> saved_patchfiles='patch-2.6.19.2.bz2 /root/T2/package/base/linux-header/atomic.patch /root/T2/package/base/linux-header/avr32.patch /root/T2/package/base/linux-header/blkpg.patch /root/T2/package/base/linux-header/capi.patch /root/T2/package/base/linux-header/crc-ccitt.patch /root/T2/package/base/linux-header/cyclades.patch /root/T2/package/base/linux-header/fddi.h.patch /root/T2/package/base/linux-header/genhd.patch /root/T2/package/base/linux-header/hiddev.patch /root/T2/package/base/linux-header/int64-i386.patch /root/T2/package/base/linux-header/kdev_t.patch /root/T2/package/base/linux-header/mod_devicetable.patch /root/T2/package/base/linux-header/scsi.patch /root/T2/package/base/linux-header/sparc-fbio.patch /root/T2/package/base/linux-header/sparc64-asm-page.h.patch /root/T2/package/base/linux-header/videodev2.patch ' ===[build_this_package:787 (last $?=0)> ls '/root/T2/package/base/linux-header/.patch.linux' ==[build_this_package:787 (last $?=2)> var_append patchfiles ' ' '' ==[var_append:75 (last $?=2)> eval '[ "$patchfiles" ] && patchfiles="${patchfiles} "' ===[var_append:75 (last $?=2)> '[' 'patch-2.6.19.2.bz2 /root/T2/package/base/linux-header/atomic.patch /root/T2/package/base/linux-header/avr32.patch /root/T2/package/base/linux-header/blkpg.patch /root/T2/package/base/linux-header/capi.patch /root/T2/package/base/linux-header/crc-ccitt.patch /root/T2/package/base/linux-header/cyclades.patch /root/T2/package/base/linux-header/fddi.h.patch /root/T2/package/base/linux-header/genhd.patch /root/T2/package/base/linux-header/hiddev.patch /root/T2/package/base/linux-header/int64-i386.patch /root/T2/package/base/linux-header/kdev_t.patch /root/T2/package/base/linux-header/mod_devicetable.patch /root/T2/package/base/linux-header/scsi.patch /root/T2/package/base/linux-header/sparc-fbio.patch /root/T2/package/base/linux-header/sparc64-asm-page.h.patch /root/T2/package/base/linux-header/videodev2.patch ' ']' ===[var_append:75 (last $?=0)> patchfiles='patch-2.6.19.2.bz2 /root/T2/package/base/linux-header/atomic.patch /root/T2/package/base/linux-header/avr32.patch /root/T2/package/base/linux-header/blkpg.patch /root/T2/package/base/linux-header/capi.patch /root/T2/package/base/linux-header/crc-ccitt.patch /root/T2/package/base/linux-header/cyclades.patch /root/T2/package/base/linux-header/fddi.h.patch /root/T2/package/base/linux-header/genhd.patch /root/T2/package/base/linux-header/hiddev.patch /root/T2/package/base/linux-header/int64-i386.patch /root/T2/package/base/linux-header/kdev_t.patch /root/T2/package/base/linux-header/mod_devicetable.patch /root/T2/package/base/linux-header/scsi.patch /root/T2/package/base/linux-header/sparc-fbio.patch /root/T2/package/base/linux-header/sparc64-asm-page.h.patch /root/T2/package/base/linux-header/videodev2.patch ' ==[var_append:76 (last $?=0)> eval 'patchfiles="${patchfiles}$3"' ===[var_append:76 (last $?=0)> patchfiles='patch-2.6.19.2.bz2 /root/T2/package/base/linux-header/atomic.patch /root/T2/package/base/linux-header/avr32.patch /root/T2/package/base/linux-header/blkpg.patch /root/T2/package/base/linux-header/capi.patch /root/T2/package/base/linux-header/crc-ccitt.patch /root/T2/package/base/linux-header/cyclades.patch /root/T2/package/base/linux-header/fddi.h.patch /root/T2/package/base/linux-header/genhd.patch /root/T2/package/base/linux-header/hiddev.patch /root/T2/package/base/linux-header/int64-i386.patch /root/T2/package/base/linux-header/kdev_t.patch /root/T2/package/base/linux-header/mod_devicetable.patch /root/T2/package/base/linux-header/scsi.patch /root/T2/package/base/linux-header/sparc-fbio.patch /root/T2/package/base/linux-header/sparc64-asm-page.h.patch /root/T2/package/base/linux-header/videodev2.patch ' ==[build_this_package:789 (last $?=0)> '[' linux-2.6.19.tar.bz2 '!=' none -a 1 = 1 ']' ==[build_this_package:790 (last $?=0)> cd /root/T2/src.linux-header.default.20080105.205244.5937.localhost ==[build_this_package:791 (last $?=0)> '[' -z '' ']' ==[build_this_package:794 (last $?=0)> case "$xsrctar" in ==[build_this_package:796 (last $?=0)> custextract=autoextract_tar_bz2 ==[build_this_package:799 (last $?=0)> '[' -n autoextract_tar_bz2 ']' ==[build_this_package:801 (last $?=0)> eval 'autoextract_tar_bz2 /root/T2/src.linux-header.default.20080105.205244.5937.localhost/archdir/linux-2.6.19.tar.bz2' ===[build_this_package:801 (last $?=0)> autoextract_tar_bz2 /root/T2/src.linux-header.default.20080105.205244.5937.localhost/archdir/linux-2.6.19.tar.bz2 ===[autoextract_tar_bz2:751 (last $?=0)> echo 'Extracting linux-2.6.19.tar.bz2 (--use-compress-program=bzip2 -xf) ... ' Extracting linux-2.6.19.tar.bz2 (--use-compress-program=bzip2 -xf) ... ===[autoextract_tar_bz2:752 (last $?=0)> tar -v --use-compress-program=bzip2 -xf /root/T2/src.linux-header.default.20080105.205244.5937.localhost/archdir/linux-2.6.19.tar.bz2 ==[build_this_package:802 (last $?=0)> cat untar.txt ==[build_this_package:803 (last $?=0)> sed 's,^\./,,' ==[build_this_package:803 (last $?=0)> cut -f1 -d/ ==[build_this_package:804 (last $?=0)> sort -u ==[build_this_package:807 (last $?=0)> '[' auto = auto ']' ==[build_this_package:808 (last $?=0)> xsrcdir=linux-2.6.19 ==[build_this_package:809 (last $?=0)> xsrcdir=linux-2.6.19 ==[build_this_package:810 (last $?=0)> xsrcdir=linux-2.6.19 ==[build_this_package:811 (last $?=0)> '[' '!' -d linux-2.6.19 ']' ==[build_this_package:823 (last $?=0)> '[' 1 = 1 ']' ==[build_this_package:824 (last $?=0)> echo 'Fixing ownership and permissions ...' Fixing ownership and permissions ... ==[build_this_package:825 (last $?=0)> chown -R 0:0 /root/T2/src.linux-header.default.20080105.205244.5937.localhost/linux-2.6.19 ==[build_this_package:828 (last $?=0)> '[' 1 = 1 ']' ==[build_this_package:829 (last $?=0)> echo 'Removing CVS, .svn, {arch} and .arch-ids directories ...' Removing CVS, .svn, {arch} and .arch-ids directories ... ==[build_this_package:830 (last $?=0)> egrep '(^\|/)(CVS\|\.svn\|\{arch\}\|\.arch-ids)(/\|$)' untar.txt ==[build_this_package:831 (last $?=0)> read x ==[build_this_package:837 (last $?=0)> echo 'Changeing into /root/T2/src.linux-header.default.20080105.205244.5937.localhost/linux-2.6.19 ...' Changeing into /root/T2/src.linux-header.default.20080105.205244.5937.localhost/linux-2.6.19 ... ==[build_this_package:838 (last $?=0)> cd /root/T2/src.linux-header.default.20080105.205244.5937.localhost/linux-2.6.19 ==[build_this_package:842 (last $?=0)> '[' 0 = 1 ']' ==[build_this_package:852 (last $?=0)> '[' 1 = 1 ']' ==[build_this_package:853 (last $?=0)> echo 'Creating /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/<..> if required ...' Creating /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/<..> if required ... ==[build_this_package:854 (last $?=0)> for x in '$foodirlist' ==[build_this_package:855 (last $?=0)> eval 'x="/root/T2/build/default-7.0-rc2-generic-x86-i486$bindir"' ===[build_this_package:855 (last $?=0)> x=/root/T2/build/default-7.0-rc2-generic-x86-i486/usr/bin ==[build_this_package:856 (last $?=0)> '[' '!' -e /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/bin ']' ==[build_this_package:854 (last $?=0)> for x in '$foodirlist' ==[build_this_package:855 (last $?=0)> eval 'x="/root/T2/build/default-7.0-rc2-generic-x86-i486$sbindir"' ===[build_this_package:855 (last $?=0)> x=/root/T2/build/default-7.0-rc2-generic-x86-i486/usr/sbin ==[build_this_package:856 (last $?=0)> '[' '!' -e /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/sbin ']' ==[build_this_package:854 (last $?=0)> for x in '$foodirlist' ==[build_this_package:855 (last $?=0)> eval 'x="/root/T2/build/default-7.0-rc2-generic-x86-i486$libdir"' ===[build_this_package:855 (last $?=0)> x=/root/T2/build/default-7.0-rc2-generic-x86-i486/usr/lib ==[build_this_package:856 (last $?=0)> '[' '!' -e /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/lib ']' ==[build_this_package:854 (last $?=0)> for x in '$foodirlist' ==[build_this_package:855 (last $?=0)> eval 'x="/root/T2/build/default-7.0-rc2-generic-x86-i486$datadir"' ===[build_this_package:855 (last $?=0)> x=/root/T2/build/default-7.0-rc2-generic-x86-i486/usr/share ==[build_this_package:856 (last $?=0)> '[' '!' -e /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/share ']' ==[build_this_package:854 (last $?=0)> for x in '$foodirlist' ==[build_this_package:855 (last $?=0)> eval 'x="/root/T2/build/default-7.0-rc2-generic-x86-i486$includedir"' ===[build_this_package:855 (last $?=0)> x=/root/T2/build/default-7.0-rc2-generic-x86-i486/usr/include ==[build_this_package:856 (last $?=0)> '[' '!' -e /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/include ']' ==[build_this_package:854 (last $?=0)> for x in '$foodirlist' ==[build_this_package:855 (last $?=0)> eval 'x="/root/T2/build/default-7.0-rc2-generic-x86-i486$sysconfdir"' ===[build_this_package:855 (last $?=0)> x=/root/T2/build/default-7.0-rc2-generic-x86-i486/etc ==[build_this_package:856 (last $?=0)> '[' '!' -e /root/T2/build/default-7.0-rc2-generic-x86-i486/etc ']' ==[build_this_package:854 (last $?=0)> for x in '$foodirlist' ==[build_this_package:855 (last $?=0)> eval 'x="/root/T2/build/default-7.0-rc2-generic-x86-i486$localstatedir"' ===[build_this_package:855 (last $?=0)> x=/root/T2/build/default-7.0-rc2-generic-x86-i486/var ==[build_this_package:856 (last $?=0)> '[' '!' -e /root/T2/build/default-7.0-rc2-generic-x86-i486/var ']' ==[build_this_package:854 (last $?=0)> for x in '$foodirlist' ==[build_this_package:855 (last $?=0)> eval 'x="/root/T2/build/default-7.0-rc2-generic-x86-i486$docdir"' ===[build_this_package:855 (last $?=0)> x=/root/T2/build/default-7.0-rc2-generic-x86-i486/usr/doc/linux-header ==[build_this_package:856 (last $?=0)> '[' '!' -e /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/doc/linux-header ']' ==[build_this_package:857 (last $?=0)> mkdir -p /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/doc/linux-header ==[build_this_package:858 (last $?=0)> rmemptydir=' /root/T2/build/default-7.0-rc2-generic-x86-i486/usr/doc/linux-header' ==[build_this_package:863 (last $?=0)> '[' .main_lx_header = . ']' ==[build_this_package:934 (last $?=1)> echo_warning 'The use of custmain is deprecated, please use hooks instead.' ==[echo_warning:68 (last $?=1)> echo_sched warning 'The use of custmain is deprecated, please use hooks instead.' ==[echo_sched:51 (last $?=1)> local request=warning tag ==[echo_sched:51 (last $?=0)> shift ==[echo_sched:52 (last $?=0)> local 'nl= ' 'tc='\''' ==[echo_sched:56 (last $?=0)> for tag in '"$@"' ==[echo_sched:57 (last $?=0)> tag='The use of custmain is deprecated, please use hooks instead.' ==[echo_sched:58 (last $?=0)> tag='The use of custmain is deprecated, please use hooks instead.' ==[echo_sched:59 (last $?=0)> tag='The use of custmain is deprecated, please use hooks instead.' ==[echo_sched:60 (last $?=0)> request='warning $'\''The use of custmain is deprecated, please use hooks instead.'\''' ==[echo_sched:63 (last $?=0)> echo 'warning $'\''The use of custmain is deprecated, please use hooks instead.'\''' > The use of custmain is deprecated, please use hooks instead. ==[build_this_package:935 (last $?=0)> eval main_lx_header ===[build_this_package:935 (last $?=0)> main_lx_header ===[main_lx_header:22 (last $?=0)> lx_patch ===[lx_patch:195 (last $?=0)> echo 'Generic linux patching ...' Generic linux patching ... ===[lx_patch:198 (last $?=0)> lx_grabextraversion ===[lx_grabextraversion:138 (last $?=0)> local ev ====[lx_grabextraversion:139 (last $?=0)> sed -n -e 's,^[ \t]EXTRAVERSION[ \t]=[ \t]\([^ \t]\),\1,p' Makefile ====[lx_grabextraversion:139 (last $?=0)> tail -n 1 ===[lx_grabextraversion:139 (last $?=0)> ev= ===[lx_grabextraversion:140 (last $?=0)> '[' '' ']' ===[lx_patch:200 (last $?=0)> hook_eval prepatch ====[hook_eval:126 (last $?=0)> IFS=' ' ====[hook_eval:126 (last $?=0)> eval 'echo "${hookidx_prepatch[]}"' =====[hook_eval:126 (last $?=0)> echo '1 4' ====[hook_eval:126 (last $?=0)> sort ===[hook_eval:126 (last $?=0)> read pri fnr ===[hook_eval:127 (last $?=0)> '[' 1 ']' ===[hook_eval:127 (last $?=0)> eval squashfs_prepatch ====[hook_eval:127 (last $?=0)> squashfs_prepatch ====[squashfs_prepatch:20 (last $?=0)> case $ver in ====[squashfs_prepatch:25 (last $?=0)> v=2.6.19 ====[squashfs_prepatch:30 (last $?=0)> tar --use-compress-program=bzip2 -xf /root/T2/download/mirror/s/squashfs3.2.tar.bz2 ====[squashfs_prepatch:31 (last $?=0)> cd squashfs3.2 ====[squashfs_prepatch:32 (last $?=0)> for x in '$base/package//squashfs-tools/.patch' ====[squashfs_prepatch:33 (last $?=0)> '[' -e /root/T2/package/filesystem/squashfs-tools/linux-2.4.33.patch ']' ====[squashfs_prepatch:33 (last $?=0)> patch -bfp1 -z .orig fl_wrapper.so: write outside basedir (/root/T2): /root/tmp/poeq90ht Due to previous errors, no 0-linux-header.log file! (Try enabling xtrace in the config to track an error inside the build system.) --- BUILD ERROR --- Creating file list and doing final adaptions ... Searching for orphaned files ... Found 5 files for this package. Found 0 orphaned files for this package. Clear (old) md5sums ... Creating md5sum files ... done. Creating package description ... Making post-install adaptions. cat: /root/T2/build/default-7.0-rc2-generic-x86-i486/var/adm/flists/*: No such file or directory sed: can't read /root/T2/build/default-7.0-rc2-generic-x86-i486/var/adm/flists/linux-header: No such file or directory grep: /root/T2/build/default-7.0-rc2-generic-x86-i486/var/adm/flists/linux-header: No such file or directory -> $root/var/adm/logs/0-linux-header.out -> 0-linux-header.err == 01/05/08 20:54:45 =[0]=> Aborted building package linux-header. ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to lists@... with a subject of: unsubscribe t2
	Re: Error and no clue where to look by René Rebe :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Hi, On Saturday 05 January 2008 21:01:52 Matthias Sommer wrote: > Hello, > > I try to build a T2 system and keep hanging at the linux header package. > > I tried i686 first, then i486. > Before building Download -required to have all files at hand. > Cleanup before each new try. > I keep hanging here. > > Where could I look? > /root/T2/package/filesystem/squashfs-tools/linux-2.4.33.patch ']' > ====[squashfs_prepatch:33 (last $?=0)> patch -bfp1 -z .orig > fl_wrapper.so: write outside basedir (/root/T2): /root/tmp/poeq90ht Hm. I never saw a /root/tmp so far. Somehow a temporary file was created there and is cought by some T2 sanity checks that should prevent a) messing up your host system and b) not yielding unwanted top-level files in the resulting new system. Did you manually configure this temporary path location somehow? Which operating system are you using? Yours, -- René Rebe - ExactCODE GmbH - Europe, Germany, Berlin Geschäftsführer: Susanne Klaus, René Rebe Sitz: Berlin, Amtsgericht Charlottenburg HRB 105 123 B USt-IdNr.: DE251602478 http://exactcode.de \| http://t2-project.org \| http://rene.rebe.name ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to lists@... with a subject of: unsubscribe t2
	Re: Error and no clue where to look by Matthias Sommer :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message René Rebe schrieb: /root/T2/package/filesystem/squashfs-tools/linux-2.4.33.patch ']' ====[squashfs_prepatch:33 (last $?=0)> patch -bfp1 -z .orig fl_wrapper.so: write outside basedir (/root/T2): /root/tmp/poeq90ht Hm. I never saw a /root/tmp so far. This one was there already before the first compile attempt. And I cannot remember having it created manually. It contains: kde-root/ ksocket-root/ mc-root/ In my environment (as root this is) I have: TMP=/root/tmp TMPDIR=/root/tmp Somehow a temporary file was created there and is cought by some T2 sanity checks that should prevent a) messing up your host system and b) not yielding unwanted top-level files in the resulting new system. should I circumvent this check somehow? (How?) Or should I set the TMP-Vars to something different? Should I simply not use the temp file system in building? Did you manually configure this temporary path location somehow? Which operating system are you using? It's Mandriva 2008.0 Regards Matthias ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to lists@... with a subject of: unsubscribe t2
	Re: Error and no clue where to look by René Rebe :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Hello again, On Monday 07 January 2008 19:06:34 Matthias Sommer wrote: > > Did you manually configure this temporary path location somehow? > > Which operating system are you using? > > > Update: > I did two tests: > 1.) unchecked the use of the temp file system - no difference > 2.) manually set TMP and TMPDIR to /tmp this one seems to work, the > build process just stepped from automake to gzip so it appears to run fine. Great. Notheless I added it to my TODO to adapt the "outside basedir" filter to take a possibly defined TMPDIR into account. Have fun, René -- René Rebe - ExactCODE GmbH - Europe, Germany, Berlin http://exactcode.de \| http://t2-project.org \| http://rene.rebe.name ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to lists@... with a subject of: unsubscribe t2
	Re: Error and no clue where to look by Matthias Sommer :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Hello once more, > Great. Notheless I added it to my TODO to adapt the "outside basedir" > filter to take a possibly defined TMPDIR into account. > next problem: when building "archiver/mine [0.23 7.0-rc2]" I get: !> gcc -Icdb-0.75 -I/usr/include -Ilibtar-1.2.11/lib -I. -Wall -Os -Ilibtar-1 .. !> gcc -Icdb-0.75 -I/usr/include -Ilibtar-1.2.11/lib -I. -Wall -Os -Ilibtar-1 .. !> gcc check.o create.o install.o remove.o pkglist.o mkpdb.o showfile.o showk .. !> gcc -static check.o create.o install.o remove.o pkglist.o mkpdb.o showfile .. !> /usr/bin/ld: cannot find -lc !> collect2: ld returned 1 exit status !> Due to previous errors, no 0-mine.log file! !> (Try enabling xtrace in the config to track an error inside the build syst .. -> $root/var/adm/logs/0-mine.out -> 0-mine.err the same part from 0-mine.err (with full compiler lines): gcc check.o create.o install.o remove.o pkglist.o mkpdb.o showfile.o showkey.o memdb.o md5.o md5sum.o mine.o avl.o cdb-0.75/cdb.a cdb-0.75/alloc.a cdb-0.75/buffer.a cdb-0.75/byte.a cdb-0.75/unix.a libtar-1.2.11/lib/libtar.a -o mine gcc -static check.o create.o install.o remove.o pkglist.o mkpdb.o showfile.o showkey.o memdb.o md5.o md5sum.o mine.o avl.o cdb-0.75/cdb.a cdb-0.75/alloc.a cdb-0.75/buffer.a cdb-0.75/byte.a cdb-0.75/unix.a libtar-1.2.11/lib/libtar.a -o mine.static /usr/bin/ld: cannot find -lc collect2: ld returned 1 exit status make: *** [mine.static] Error 1 Due to previous errors, no 0-mine.log file! (Try enabling xtrace in the config to track an error inside the build system.) --- BUILD ERROR --- What's this? I assume there is a link to be made where an option "-lc" is mistreated as a file name? Where should I look this time? Regards Matthias ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to lists@... with a subject of: unsubscribe t2