Electric Reverse

[a4gom]

Doesn't seem to be too much detail kicking about on this issue, I've found a small amount of info and a couple of suppliers but would prefer to make my own.

I've seen a few pictures of them and seen some in person at a race meeting, they all appear to be using the same starter motor.

Does anyone know what the starter is off? It looks like its from a bike but which one?

[Thomas Jordan]

I don't really know anything about them, but do know that some people use
ATV winches for the drive motor..

--
Notice: This e-mail is confidential and should not be used by anyone who is
not the original intended recipient. It should not be photocopied,
transmitted via walkie-talkie, CB radio, satellite dish, cable TV, overhead
projector, smoke signal, Morse code, pig Latin, sign language, short hand,
carrier pigeon, or any other means. This e-mail is under no circumstances to
be translated into French. Do not taunt or provoke this e-mail. People
taking certain prescription medications may experience nausea, dizziness,
hysteria, vomiting, and temporary loss of short term memory while reading
this e-mail. Please consult your physician before reading this e-mail. All
models depicted in this email are 18 years of age or older. If you have
received this e-mail in error it's probably because I was drinking when I
typed the e-mail address.

Please consider the environment before printing.


[Non-text portions of this message have been removed]

[Bob Mortimer]

On Tue, September 9, 2008 2:02 pm, a4gom wrote:

> Does anyone know what the starter is off? It looks like its from a bike
> but which one? --

Dunno what they're off but the one I have ain't off a bike, too big and
heavy. I got mine from Andy Bates (AB Performance).

Bob

[Gordon Griffin]

Many of them will use a carbed Fireblade (or Blackbird) starter and gears if the pinion is to face forwards, or from the motor from a VFR400 (and Blade gears) if the pinion faces the rear.  they both look the same, but rotate the opposite way.
 
G



To: bike-engined-cars@...: teambuttnaked@...: Tue, 9 Sep 2008 06:02:04 -0700Subject: [bike-engined-cars] Electric Reverse




Doesn't seem to be too much detail kicking about on this issue, I've found asmall amount of info and a couple of suppliers but would prefer to make myown.I've seen a few pictures of them and seen some in person at a race meeting,they all appear to be using the same starter motor. Does anyone know what the starter is off? It looks like its from a bike butwhich one?-- View this message in context: http://www.nabble.com/Electric-Reverse-tp19391866p19391866.htmlSent from the Yahoo BEC list - Bike Engined Cars mailing list archive at Nabble.com.






[Non-text portions of this message have been removed]

[Andy-235]

When clearing out my workshop a couple of weeks ago I found I have a Honda
starter motor and gear train left over from my old build.

I'm pretty sure it's from a CBR600. The motor's the same as a blade but the
gearing looks different.

 

Mail me offlist if you want to make me an offer on it. andy@...

 

  _____  

From: bike-engined-cars@...
[mailto:bike-engined-cars@...] On Behalf Of a4gom
Sent: 09 September 2008 14:02
To: bike-engined-cars@...
Subject: [bike-engined-cars] Electric Reverse

 


Doesn't seem to be too much detail kicking about on this issue, I've found a
small amount of info and a couple of suppliers but would prefer to make my
own.

I've seen a few pictures of them and seen some in person at a race meeting,
they all appear to be using the same starter motor.

Does anyone know what the starter is off? It looks like its from a bike but
which one?
--
View this message in context: http://www.nabble.
<http://www.nabble.com/Electric-Reverse-tp19391866p19391866.html>
com/Electric-Reverse-tp19391866p19391866.html
Sent from the Yahoo BEC list - Bike Engined Cars mailing list archive at
Nabble.com.

 



[Non-text portions of this message have been removed]

[a4gom]

Thanks Gordon, I may have an electric motor sorted out but just in case it doesn't work I need tohave something in reserve.

Andy i've sent you an email

Gordon Griffin wrote:

Many of them will use a carbed Fireblade (or Blackbird) starter and gears if the pinion is to face forwards, or from the motor from a VFR400 (and Blade gears) if the pinion faces the rear.  they both look the same, but rotate the opposite way.
 
G



To: [e-mail]: [e-mail]: Tue, 9 Sep 2008 06:02:04 -0700Subject: [bike-engined-cars] Electric Reverse




Doesn't seem to be too much detail kicking about on this issue, I've found asmall amount of info and a couple of suppliers but would prefer to make myown.I've seen a few pictures of them and seen some in person at a race meeting,they all appear to be using the same starter motor. Does anyone know what the starter is off? It looks like its from a bike butwhich one?-- View this message in context: http://www.nabble.com/Electric-Reverse-tp19391866p19391866.htmlSent from the Yahoo BEC list - Bike Engined Cars mailing list archive at Nabble.com.






[Non-text portions of this message have been removed]

[a4gom]

Sorry Gordon, this is probably a daft question but what do you mean by
the pinion? Is this the gear which comes out of the starter motor?
Thanks
Andy

--- In bike-engined-cars@..., Gordon Griffin
<gordon_griffin@...> wrote:
>
> Many of them will use a carbed Fireblade (or Blackbird) starter and
gears if the pinion is to face forwards, or from the motor from a
VFR400 (and Blade gears) if the pinion faces the rear.  they both look
the same, but rotate the opposite way.
>  
> G
>
>
>
> To: bike-engined-cars@...: teambuttnaked@...: Tue, 9 Sep 2008
06:02:04 -0700Subject: [bike-engined-cars] Electric Reverse
>
>
>
>
> Doesn't seem to be too much detail kicking about on this issue, I've
found asmall amount of info and a couple of suppliers but would prefer
to make myown.I've seen a few pictures of them and seen some in person
at a race meeting,they all appear to be using the same starter motor.
Does anyone know what the starter is off? It looks like its from a
bike butwhich one?-- View this message in context:
http://www.nabble.com/Electric-Reverse-tp19391866p19391866.htmlSent
from the Yahoo BEC list - Bike Engined Cars mailing list archive at
Nabble.com.
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Gordon Griffin]

yes, it is

To: bike-engined-cars@...: teambuttnaked@...: Wed, 10 Sep 2008 15:54:32 +0000Subject: [bike-engined-cars] Re: Electric Reverse




Sorry Gordon, this is probably a daft question but what do you mean bythe pinion? Is this the gear which comes out of the starter motor?ThanksAndy--- In bike-engined-cars@..., Gordon Griffin<gordon_griffin@...> wrote:>> Many of them will use a carbed Fireblade (or Blackbird) starter andgears if the pinion is to face forwards, or from the motor from aVFR400 (and Blade gears) if the pinion faces the rear. they both lookthe same, but rotate the opposite way.> > G> > > > To: bike-engined-cars@...: teambuttnaked@...: Tue, 9 Sep 200806:02:04 -0700Subject: [bike-engined-cars] Electric Reverse> > > > > Doesn't seem to be too much detail kicking about on this issue, I'vefound asmall amount of info and a couple of suppliers but would preferto make myown.I've seen a few pictures of them and seen some in personat a race meeting,they all appear to be using the same starter motor.Does anyone know what the starter is off? It looks like its from abike butwhich one?-- View this message in context:http://www.nabble.com/Electric-Reverse-tp19391866p19391866.htmlSentfrom the Yahoo BEC list - Bike Engined Cars mailing list archive atNabble.com. > > > > > > > [Non-text portions of this message have been removed]>






[Non-text portions of this message have been removed]