Nabble - Debian Testing

Re: Cable digital (DVB-C) ok was: kernel module budget-ci also for cable digital?

2008-10-12T03:33:12Z

After reboot, the sound again is gone; so alsaconfig must be executed
after every boot; the cause of this is unknowsn

David schrieb:

> The devices for DVB are not /dev/video*, but
> /dev/dvb/...
>
> Applications for these devices are in package dvb-apps.
>
> Scanning worked fine with:
>
> scan /usr/share/dvb/dvb-c/de-Kabel_BW > channels.conf
>
> and recording with:
>
> gnutv -channels channels.conf -out file xxxx.mpg name
>
> Watching is possible for example with VLC media Player, even before
> recording has been finished.
>
> To hear the sound in VLC, I had to execute - as root - *alsaconfig*.
>
>

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501969: upgrade-reports: Etch-Lenny dist-upgrade Dell PE6850 doesn't boot past initramfs

2008-10-12T03:00:55Z

Package: upgrade-reports
Severity: important

Dell 6850
4 3Ghz 667 Bus 8M Cache Xeons
perc4/DC
1 volume of 2 73G disks in mirror

Lenny 2.6.26-1-686-bigmem initramfs attempts to mount filesystems before detecting the disk, causing boot failure.

Reproduce by:

Install etch (pxe netinstall)
update to lenny with dist-upgrade
reboot

-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-6-686-bigmem (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: Re: Bug#501855: upgrade-reports: initscripts Conflicts/Pre-Depends loop

2008-10-11T03:06:04Z

Processing commands for control@...:

> reassign 501855 apt 0.7.14
Bug#501855: upgrade-reports: initscripts Conflicts/Pre-Depends loop
Bug reassigned from package `upgrade-reports' to `apt'.

> thanks
Stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501855: upgrade-reports: initscripts Conflicts/Pre-Depends loop

2008-10-11T03:02:45Z

reassign 501855 apt 0.7.14
thanks

On 2008-10-11 10:20 +0200, Olaf van der Spek wrote:

> On Sat, Oct 11, 2008 at 6:59 AM, Sven Joachim <svenjoac@...> wrote:
>> On 2008-10-11 03:44 +0200, Olaf van der Spek wrote:
>>
>>> Package: upgrade-reports
>>> Severity: normal
>>
>> I'm afraid the severity might have to be bumped to grave if other
>> people see this problem as well.
>>
>>> I'm trying to upgrade a fresh Etch install to Lenny. I've hit a speedbump, it seems, see below.
>>> How should I (or a normal user) solve this?
>>>
>>> Olaf
>>>
>>> # aptitude full-upgrade
>> [snip]
>>> E: This installation run will require temporarily removing the essential package initscripts due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
>>> E: Internal Error, Could not early remove initscripts
>>
>> Can you please try "aptitude -s install initscripts"? That might give
>> an idea which package is causing the dependency loop.
>
> # aptitude -s install initscripts
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> Reading extended state information
> Initializing package states... Done
> Reading task descriptions... Done
> The following packages are BROKEN:
> initscripts
> The following packages will be upgraded:
> libselinux1 libsepol1 sysvinit-utils
> 4 packages upgraded, 0 newly installed, 0 to remove and 230 not upgraded.
> Need to get 0B/347kB of archives. After unpacking 102kB will be used.
> The following packages have unmet dependencies:
> initscripts: Conflicts: insserv (< 1.09.0-12) but 1.08.0-11 is
> installed and it is kept back.
> The following actions will resolve these dependencies:
>
> Upgrade the following packages:
> insserv [1.08.0-11 (now) -> 1.12.0-4 (testing)]
>
> Score is 120
>
> Accept this solution? [Y/n/q/?]
> The following packages will be upgraded:
> initscripts insserv libselinux1 libsepol1 sysvinit-utils
> 5 packages upgraded, 0 newly installed, 0 to remove and 229 not upgraded.
> Need to get 0B/413kB of archives. After unpacking 426kB will be freed.
> Do you want to continue? [Y/n/?]
> Would download/install/remove packages.

Hm, that looks fairly normal. Probably it would work if you upgrade
initscripts before the full-upgrade. However, it does not explain why
apt wanted to temporarily remove initscripts in the first place. This
looks like a bug in apt, reassigning.

Sven

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501855: upgrade-reports: initscripts Conflicts/Pre-Depends loop

2008-10-11T01:20:03Z

On Sat, Oct 11, 2008 at 6:59 AM, Sven Joachim <svenjoac@...> wrote:

> On 2008-10-11 03:44 +0200, Olaf van der Spek wrote:
>
>> Package: upgrade-reports
>> Severity: normal
>
> I'm afraid the severity might have to be bumped to grave if other
> people see this problem as well.
>
>> I'm trying to upgrade a fresh Etch install to Lenny. I've hit a speedbump, it seems, see below.
>> How should I (or a normal user) solve this?
>>
>> Olaf
>>
>> # aptitude full-upgrade
> [snip]
>> E: This installation run will require temporarily removing the essential package initscripts due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
>> E: Internal Error, Could not early remove initscripts
>
> Can you please try "aptitude -s install initscripts"? That might give
> an idea which package is causing the dependency loop.

# aptitude -s install initscripts
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Reading task descriptions... Done
The following packages are BROKEN:
initscripts
The following packages will be upgraded:
libselinux1 libsepol1 sysvinit-utils
4 packages upgraded, 0 newly installed, 0 to remove and 230 not upgraded.
Need to get 0B/347kB of archives. After unpacking 102kB will be used.
The following packages have unmet dependencies:
initscripts: Conflicts: insserv (< 1.09.0-12) but 1.08.0-11 is
installed and it is kept back.
The following actions will resolve these dependencies:

Upgrade the following packages:
insserv [1.08.0-11 (now) -> 1.12.0-4 (testing)]

Score is 120

Accept this solution? [Y/n/q/?]
The following packages will be upgraded:
initscripts insserv libselinux1 libsepol1 sysvinit-utils
5 packages upgraded, 0 newly installed, 0 to remove and 229 not upgraded.
Need to get 0B/413kB of archives. After unpacking 426kB will be freed.
Do you want to continue? [Y/n/?]
Would download/install/remove packages.

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501855: upgrade-reports: initscripts Conflicts/Pre-Depends loop

2008-10-10T21:59:06Z

On 2008-10-11 03:44 +0200, Olaf van der Spek wrote:

> Package: upgrade-reports
> Severity: normal

I'm afraid the severity might have to be bumped to grave if other
people see this problem as well.

> I'm trying to upgrade a fresh Etch install to Lenny. I've hit a speedbump, it seems, see below.
> How should I (or a normal user) solve this?
>
> Olaf
>
> # aptitude full-upgrade
[snip]
> E: This installation run will require temporarily removing the essential package initscripts due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
> E: Internal Error, Could not early remove initscripts

Can you please try "aptitude -s install initscripts"? That might give
an idea which package is causing the dependency loop.

Sven

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501855: upgrade-reports: initscripts Conflicts/Pre-Depends loop

2008-10-10T16:49:37Z

Package: upgrade-reports
Severity: normal

Hi,

I'm trying to upgrade a fresh Etch install to Lenny. I've hit a speedbump, it seems, see below.
How should I (or a normal user) solve this?

Olaf

# aptitude full-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
Reading task descriptions... Done
The following packages are BROKEN:
libsasl2 libssp0
The following NEW packages will be installed:
bash-completion{a} bsd-mailx{a} bwidget{a} ca-certificates{a} checkpolicy{a} cpp-4.3{a} debian-faq{a} defoma{a} fam{a} fontconfig{a} fontconfig-config{a} g++-4.3{a} gcc-4.3{a} grub-common{a} hicolor-icon-theme{a} libatk1.0-0{a} libatk1.0-data{a} libbind9-40{a}
libboost-date-time1.34.1{a} libboost-doc{a} libboost-filesystem1.34.1{a} libboost-graph-dev{a} libboost-graph1.34.1{a} libboost-iostreams-dev{a} libboost-iostreams1.34.1{a} libboost-program-options1.34.1{a} libboost-python-dev{a} libboost-python1.34.1{a}
libboost-regex1.34.1{a} libboost-serialization1.34.1{a} libboost-signals-dev{a} libboost-signals1.34.1{a} libboost-test-dev{a} libboost-test1.34.1{a} libboost-thread-dev{a} libboost-thread1.34.1{a} libboost-wave-dev{a} libboost-wave1.34.1{a} libcairo2{a}
libcap2{a} libcups2{a} libdatrie0{a} libdb4.5{a} libdevmapper1.02.1{a} libdns43{a} libdrm2{a} libfam0{a} libfontconfig1{a} libfontenc1{a} libfreetype6{a} libgl1-mesa-glx{a} libglade2-0{a} libglib2.0-0{a} libglib2.0-data{a} libgmp3c2{a} libgnutls26{a}
libgomp1{a}
libgssglue1{a} libgtk2.0-0{a} libgtk2.0-bin{a} libgtk2.0-common{a} libhtml-template-perl{a} libice6{a} libicu38{a} libisc44{a} libisccc40{a} libisccfg40{a} libjpeg62{a} libkeyutils1{a} libldap-2.4-2{a} libltdl3{a} liblwres40{a} libmcrypt4{a} libmpfr1ldbl{a}
libneon27-gnutls{a} libpango1.0-0{a} libpango1.0-common{a} libpci3{a} libpixman-1-0{a} libpng12-0{a} libpq5{a} libqpol1{a} libserf-0-0{a} libsetools-tcl{a} libsm6{a} libstdc++6-4.3-dev{a} libterm-readkey-perl{a} libterm-readline-perl-perl{a} libthai-data{a}
libthai0{a} libtiff4{a} libustr-1.0-1{a} libx11-6{a} libx11-data{a} libxau6{a} libxaw7{a} libxcb-render-util0{a} libxcb-render0{a} libxcb-xlib0{a} libxcb1{a} libxcomposite1{a} libxcursor1{a} libxdamage1{a} libxdmcp6{a} libxext6{a} libxfixes3{a} libxfont1{a}
libxft2{a} libxi6{a} libxinerama1{a} libxmu6{a} libxmuu1{a} libxpm4{a} libxrandr2{a} libxrender1{a} libxt6{a} libxtst6{a} libxv1{a} libxxf86dga1{a} libxxf86vm1{a} linux-image-2.6.26-1-amd64{a} netcat-traditional{a} openssh-blacklist-extra{a} openssl{a}
perl-doc{a}
php5-mcrypt{a} python-dev{a} python-sepolgen{a} python2.5{a} python2.5-dev{a} python2.5-minimal{a} selinux-policy-default{a} setools{a} tcl8.4{a} tk8.4{a} ttf-dejavu{a} ttf-dejavu-core{a} ttf-dejavu-extra{a} uuid-runtime{a} x-ttcidfont-conf{a} x11-common{a}
x11-utils{a} xauth{a} xbitmaps{a} xfonts-encodings{a} xfonts-utils{a} xterm{a}
The following packages will be REMOVED:
libgssapi2{a} libldap2{a} libpci2{a} python2.4{u} python2.4-minimal{u} selinux-policy-refpolicy-targeted{a}
The following packages will be upgraded:
acpid adduser at base-files base-passwd bash bc bind9-host bsdmainutils bsdutils busybox cmake console-common console-data console-tools coreutils cpio cpp cpp-4.1 cron dc debconf debconf-i18n debian-archive-keyring debianutils dhcp3-client dhcp3-common
dictionaries-common diff dmidecode dnsutils doc-debian doc-linux-text dselect e2fslibs e2fsprogs ed eject exim4 exim4-base exim4-config exim4-daemon-light file findutils finger ftp g++ g++-4.1 gcc gcc-4.1 gcc-4.1-base gettext-base gnupg gpgv grep groff-base
grub
gzip hostname iamerican ibritish ifupdown info initramfs-tools initscripts insserv installation-report iptables iputils-ping ispell kexec-tools klibc-utils klogd laptop-detect less libacl1 libapr1 libaprutil1 libattr1 libblkid1 libboost-date-time-dev
libboost-dev
libboost-filesystem-dev libboost-program-options-dev libboost-regex-dev libboost-serialization-dev libbz2-1.0 libcomerr2 libconsole libdb4.2 libdb4.3 libdbd-mysql-perl libdbi-perl libedit2 libevent1 libexpat1 libgc1c2 libgcc1 libgcrypt11 libgpg-error0 libidn11
libklibc libkrb53 liblocale-gettext-perl liblockfile1 libmagic1 libmysqlclient15-dev libmysqlclient15off libncurses5 libneon26 libnewt0.52 libnfsidmap2 libpam-modules libpam-runtime libpam0g libpcre3 libpopt0 libreadline5 librpcsecgss3 libsasl2-2 libselinux1
libsemanage1 libsepol1 libsigc++-2.0-0c2a libslang2 libsqlite3-0 libss2 libssl0.9.8 libstdc++6-4.1-dev libsvn1 libtasn1-3 libtasn1-3-bin libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 libvolume-id0 libwrap0 libxml2
lighttpd
linux-image-2.6-amd64 login logrotate lsb-base lsof m4 mailx make makedev man-db manpages mawk mime-support mktemp module-init-tools mount mpack mtools mtr-tiny mutt mysql-client-5.0 mysql-common mysql-server mysql-server-5.0 nano ncurses-base ncurses-bin
ncurses-term net-tools netbase netcat nfs-common openbsd-inetd openssh-blacklist openssh-client openssh-server passwd patch pciutils perl perl-base perl-modules php5-cgi php5-common php5-mysql phpmyadmin pidentd policycoreutils popularity-contest portmap procps
psmisc python python-central python-minimal python-newt python-selinux python-semanage python-support readline-common reportbug sed sharutils strace subversion sysklogd sysv-rc sysvinit sysvinit-utils tar tasksel tasksel-data tcpd telnet texinfo time traceroute
ucf udev update-inetd usbutils util-linux vim-common vim-tiny w3m wamerican wget whiptail whois zlib1g zlib1g-dev
The following packages are RECOMMENDED but will NOT be installed:
libfribidi0 libmudflap0-dev libsasl2-modules php5-gd wbritish xml-core
232 packages upgraded, 147 newly installed, 6 to remove and 0 not upgraded.
Need to get 0B/255MB of archives. After unpacking 402MB will be used.
The following packages have unmet dependencies:
libsasl2: Depends: libsasl2-2 (= 2.1.22.dfsg1-8) but 2.1.22.dfsg1-23 is to be installed.
libssp0: Depends: gcc-4.1-base (= 4.1.1-21) but 4.1.2-23 is to be installed.
The following actions will resolve these dependencies:

Remove the following packages:
libsasl2
libssp0

Install the following packages:
libsasl2-modules [2.1.22.dfsg1-23 (testing)]

Leave the following dependencies unresolved:
defoma recommends libft-perl
Score is -27

Accept this solution? [Y/n/q/?]
The following NEW packages will be installed:
bash-completion{a} bsd-mailx{a} bwidget{a} ca-certificates{a} checkpolicy{a} cpp-4.3{a} debian-faq{a} defoma{a} fam{a} fontconfig{a} fontconfig-config{a} g++-4.3{a} gcc-4.3{a} grub-common{a} hicolor-icon-theme{a} libatk1.0-0{a} libatk1.0-data{a} libbind9-40{a}
libboost-date-time1.34.1{a} libboost-doc{a} libboost-filesystem1.34.1{a} libboost-graph-dev{a} libboost-graph1.34.1{a} libboost-iostreams-dev{a} libboost-iostreams1.34.1{a} libboost-program-options1.34.1{a} libboost-python-dev{a} libboost-python1.34.1{a}
libboost-regex1.34.1{a} libboost-serialization1.34.1{a} libboost-signals-dev{a} libboost-signals1.34.1{a} libboost-test-dev{a} libboost-test1.34.1{a} libboost-thread-dev{a} libboost-thread1.34.1{a} libboost-wave-dev{a} libboost-wave1.34.1{a} libcairo2{a}
libcap2{a} libcups2{a} libdatrie0{a} libdb4.5{a} libdevmapper1.02.1{a} libdns43{a} libdrm2{a} libfam0{a} libfontconfig1{a} libfontenc1{a} libfreetype6{a} libgl1-mesa-glx{a} libglade2-0{a} libglib2.0-0{a} libglib2.0-data{a} libgmp3c2{a} libgnutls26{a}
libgomp1{a}
libgssglue1{a} libgtk2.0-0{a} libgtk2.0-bin{a} libgtk2.0-common{a} libhtml-template-perl{a} libice6{a} libicu38{a} libisc44{a} libisccc40{a} libisccfg40{a} libjpeg62{a} libkeyutils1{a} libldap-2.4-2{a} libltdl3{a} liblwres40{a} libmcrypt4{a} libmpfr1ldbl{a}
libneon27-gnutls{a} libpango1.0-0{a} libpango1.0-common{a} libpci3{a} libpixman-1-0{a} libpng12-0{a} libpq5{a} libqpol1{a} libsasl2-modules{a} libserf-0-0{a} libsetools-tcl{a} libsm6{a} libstdc++6-4.3-dev{a} libterm-readkey-perl{a} libterm-readline-perl-perl{a}
libthai-data{a} libthai0{a} libtiff4{a} libustr-1.0-1{a} libx11-6{a} libx11-data{a} libxau6{a} libxaw7{a} libxcb-render-util0{a} libxcb-render0{a} libxcb-xlib0{a} libxcb1{a} libxcomposite1{a} libxcursor1{a} libxdamage1{a} libxdmcp6{a} libxext6{a} libxfixes3{a}
libxfont1{a} libxft2{a} libxi6{a} libxinerama1{a} libxmu6{a} libxmuu1{a} libxpm4{a} libxrandr2{a} libxrender1{a} libxt6{a} libxtst6{a} libxv1{a} libxxf86dga1{a} libxxf86vm1{a} linux-image-2.6.26-1-amd64{a} netcat-traditional{a} openssh-blacklist-extra{a}
openssl{a} perl-doc{a} php5-mcrypt{a} python-dev{a} python-sepolgen{a} python2.5{a} python2.5-dev{a} python2.5-minimal{a} selinux-policy-default{a} setools{a} tcl8.4{a} tk8.4{a} ttf-dejavu{a} ttf-dejavu-core{a} ttf-dejavu-extra{a} uuid-runtime{a}
x-ttcidfont-conf{a} x11-common{a} x11-utils{a} xauth{a} xbitmaps{a} xfonts-encodings{a} xfonts-utils{a} xterm{a}
The following packages will be REMOVED:
libgssapi2{a} libldap2{a} libpci2{a} libsasl2{a} libssp0{a} python2.4{u} python2.4-minimal{u} selinux-policy-refpolicy-targeted{a}
The following packages will be upgraded:
acpid adduser at base-files base-passwd bash bc bind9-host bsdmainutils bsdutils busybox cmake console-common console-data console-tools coreutils cpio cpp cpp-4.1 cron dc debconf debconf-i18n debian-archive-keyring debianutils dhcp3-client dhcp3-common
dictionaries-common diff dmidecode dnsutils doc-debian doc-linux-text dselect e2fslibs e2fsprogs ed eject exim4 exim4-base exim4-config exim4-daemon-light file findutils finger ftp g++ g++-4.1 gcc gcc-4.1 gcc-4.1-base gettext-base gnupg gpgv grep groff-base
grub
gzip hostname iamerican ibritish ifupdown info initramfs-tools initscripts insserv installation-report iptables iputils-ping ispell kexec-tools klibc-utils klogd laptop-detect less libacl1 libapr1 libaprutil1 libattr1 libblkid1 libboost-date-time-dev
libboost-dev
libboost-filesystem-dev libboost-program-options-dev libboost-regex-dev libboost-serialization-dev libbz2-1.0 libcomerr2 libconsole libdb4.2 libdb4.3 libdbd-mysql-perl libdbi-perl libedit2 libevent1 libexpat1 libgc1c2 libgcc1 libgcrypt11 libgpg-error0 libidn11
libklibc libkrb53 liblocale-gettext-perl liblockfile1 libmagic1 libmysqlclient15-dev libmysqlclient15off libncurses5 libneon26 libnewt0.52 libnfsidmap2 libpam-modules libpam-runtime libpam0g libpcre3 libpopt0 libreadline5 librpcsecgss3 libsasl2-2 libselinux1
libsemanage1 libsepol1 libsigc++-2.0-0c2a libslang2 libsqlite3-0 libss2 libssl0.9.8 libstdc++6-4.1-dev libsvn1 libtasn1-3 libtasn1-3-bin libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 libvolume-id0 libwrap0 libxml2
lighttpd
linux-image-2.6-amd64 login logrotate lsb-base lsof m4 mailx make makedev man-db manpages mawk mime-support mktemp module-init-tools mount mpack mtools mtr-tiny mutt mysql-client-5.0 mysql-common mysql-server mysql-server-5.0 nano ncurses-base ncurses-bin
ncurses-term net-tools netbase netcat nfs-common openbsd-inetd openssh-blacklist openssh-client openssh-server passwd patch pciutils perl perl-base perl-modules php5-cgi php5-common php5-mysql phpmyadmin pidentd policycoreutils popularity-contest portmap procps
psmisc python python-central python-minimal python-newt python-selinux python-semanage python-support readline-common reportbug sed sharutils strace subversion sysklogd sysv-rc sysvinit sysvinit-utils tar tasksel tasksel-data tcpd telnet texinfo time traceroute
ucf udev update-inetd usbutils util-linux vim-common vim-tiny w3m wamerican wget whiptail whois zlib1g zlib1g-dev
The following packages are RECOMMENDED but will NOT be installed:
libfribidi0 libmudflap0-dev php5-gd wbritish xml-core
232 packages upgraded, 148 newly installed, 8 to remove and 0 not upgraded.
Need to get 0B/255MB of archives. After unpacking 402MB will be used.
Do you want to continue? [Y/n/?]
Writing extended state information... Done
E: This installation run will require temporarily removing the essential package initscripts due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
E: Internal Error, Could not early remove initscripts
A package failed to install. Trying to recover:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
Reading task descriptions... Done

-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-6-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Cable digital (DVB-C) ok was: kernel module budget-ci also for cable digital?

2008-10-09T22:00:23Z

The devices for DVB are not /dev/video*, but
/dev/dvb/...

Applications for these devices are in package dvb-apps.

Scanning worked fine with:

scan /usr/share/dvb/dvb-c/de-Kabel_BW > channels.conf

and recording with:

gnutv -channels channels.conf -out file xxxx.mpg name

Watching is possible for example with VLC media Player, even before
recording has been finished.

To hear the sound in VLC, I had to execute - as root - *alsaconfig*.

David schrieb:

> Good evening,
>
> I tried the module budget-ci for watching TV and recording.
>
> I have a Technotrend Budget DVB-C C-1500 Card. This is not for DVB-S or
> DVB-T but for cable digital only.
> .
> Should the kernel module budget-ci work with this card too? Should I
> file a bug?
>
> When saying
>
> vdir /dev/vi*
>
> then comes only /dev/video0, that is the webcam working with module
> uvcvideo. /dev/video1 does not exist.
>
> System: Debian testing 4.1 lenny, AMD64, kernel 2.6.26-1-amd64.
>
> David
>
>

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501687: upgrade-reports: upgrade breaks during mount package

2008-10-09T08:25:39Z

Package: upgrade-reports
Severity: normal

-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

During upgrade from edge -> lenny aptitude exits
aptitude full-upgrade
....
...
Preparing to replace mount 2.12r-19etch1 (using .../mount_2.13.1.1-1_i386.deb) ...
You have NFS mount points currently mounted, and this version of mount
requires that nfs-common be upgraded before NFS mounts will work.

Aborting install.
dpkg: error processing /var/cache/apt/archives/mount_2.13.1.1-1_i386.deb (--unpack):
subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/mount_2.13.1.1-1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
...
...

unmount of all nfs-mounts solved the problem.

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: reassign 418911 to release-notes ...

2008-10-08T23:18:04Z

Processing commands for control@...:

> reassign 418911 release-notes
Bug#418911: upgrade-reports: Sarge -> Etch: A Painful Upgrade
Bug reassigned from package `upgrade-reports' to `release-notes'.

> retitle 418911 Please simplify upgrade sections and make sure command syntax is right
Bug#418911: upgrade-reports: Sarge -> Etch: A Painful Upgrade
Changed Bug title to `Please simplify upgrade sections and make sure command syntax is right' from `upgrade-reports: Sarge -> Etch: A Painful Upgrade'.

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 417905

2008-10-08T23:12:04Z

Processing commands for control@...:

> # should be fixed for some time
> close 417905
Bug#417905: upgrade-reports: sarge to etch when ntp-server is installed
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to TSUCHIYA Masatoshi <tsuchiya@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 416944

2008-10-08T23:12:03Z

Processing commands for control@...:

> # fixed for some time
> close 416944
Bug#416944: dist-upgrade stuck
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Lou Poppler <lwp@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 416439

2008-10-08T23:09:02Z

Processing commands for control@...:

> # fixed in documentation
> close 416439
Bug#416439: upgrade-reports: sarge 3.1r4 -> etch snapshot 2007/1/15
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to J S Bygott <jsb_no_spm@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 416331

2008-10-08T23:06:08Z

Processing commands for control@...:

> # fixed some time ago
> close 416331
Bug#416331: upgrade-reports: Sarge + Backports -> Etch upgrade: Can't create /initrd.img symlink
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Micha Lenk <micha@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 416330

2008-10-08T23:06:06Z

Processing commands for control@...:

> # fixed in documentation
> close 416330
Bug#416330: server upgrade w/ stock linux 2.6.8 succeeds with some minor issues
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Robert Millan <rmh@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 416303

2008-10-08T23:06:04Z

Processing commands for control@...:

> # documentation fixed
> close 416303
Bug#416303: upgrade-reports: upgrade report: success on a simple mail/web server
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to d2@...

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 416301

2008-10-08T23:06:03Z

Processing commands for control@...:

> # fixed some time ago
> close 416301
Bug#416301: upgrade-reports: sarge -> etch KDE desktop upgrade report
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Noah Meyerhans <noahm@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 416239

2008-10-08T23:03:04Z

Processing commands for control@...:

> # fixed in documentation
> close 416239
Bug#416239: upgrade-reports: upgrade report from Sarge Japanese environment to Etch
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to kmuto@...

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 398924

2008-10-08T23:03:02Z

Processing commands for control@...:

> # fixed in documentation
> close 398924
Bug#398924: Conflict between Gnome, udev, hotplug and linux-2.4
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Robert Millan <rmh@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 369475

2008-10-08T23:00:07Z

Processing commands for control@...:

> # sarge is obsolete :-)
> close 369475
Bug#369475: (no subject)
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Daniel Stecker <dstecker@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 316991

2008-10-08T23:00:05Z

Processing commands for control@...:

> # sarge is obsolete :-)
> close 316991
Bug#316991: Upgrade Woody->Sarge on i386: Minor problem due to xlibmesa3
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Christoph Seibert <debian-bugs@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 310793

2008-10-08T23:00:03Z

Processing commands for control@...:

> # sarge is obsolete :-)
> close 310793
Bug#310793: [Release notes] perl DB_File migration from 2.0 to 4.2
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Jeremy Nickurak <atrus@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 416547

2008-10-08T22:57:07Z

Processing commands for control@...:

> # fixed for some time
> close 416547
Bug#416547: upgrade-reports: Etch upgrade removes X windows
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Bill Thompson <billt@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 458336

2008-10-08T22:57:06Z

Processing commands for control@...:

> # fixed for some time
> close 458336
Bug#458336: upgrade-reports: XFCE refuses to initialize GTK+, restarts X
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Maciej Habant <lays25@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 404525

2008-10-08T22:54:10Z

Processing commands for control@...:

> # fixed for some time
> close 404525
Bug#404525: upgrade-reports: sarge->etch upgrade
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Kurt Roeckx <kurt@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 396496

2008-10-08T22:54:08Z

Processing commands for control@...:

> # fixed for some time
> close 396496
Bug#396496: Problems upgrading sarge -> etch
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to "Kevin B. McCarty" <kmccarty@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 396331

2008-10-08T22:54:06Z

Processing commands for control@...:

> # works for some time
> close 396331
Bug#396331: upgrade-reports: sarge to etch removes kernels
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Ryan Finnie <ryan@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 316948

2008-10-08T22:51:05Z

Processing commands for control@...:

> # sarge is obsolete :-)
> close 316948
Bug#316948: upgrade-reports: festlex-poslex package blocks woody to sarge upgrade
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Victor Munoz <vmunoz@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: closing 316379

2008-10-08T22:51:04Z

Processing commands for control@...:

> # sarge is obsolete :-)
> close 316379
Bug#316379: release notes inconsistent: woody vs. sarge aptitude
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug closed, send any further explanations to Justin Pryzby <justinpryzby@...>

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Processed: retitle 501546 to Lenny aptitude fails to upgrade xorg and php, problems with clamd/exim/spamassassin and squid

2008-10-08T05:24:05Z

Processing commands for control@...:

> # Automatically generated email from bts, devscripts version 2.9.26
> retitle 501546 Lenny aptitude fails to upgrade xorg and php, problems with clamd/exim/spamassassin and squid
Bug#501546: (fwd) Re: What you can do for "Lenny" [steven@...]
Changed Bug title to `Lenny aptitude fails to upgrade xorg and php, problems with clamd/exim/spamassassin and squid' from `(fwd) Re: What you can do for "Lenny" [steven@...]'.

>
End of message, stopping processing here.

Please contact me if you need assistance.

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501546: Forgot the important content

2008-10-08T04:59:09Z

On Wed, Oct 8, 2008 at 12:52:26 +0200, Alexander Reichle-Schmehl wrote:

> The following packages have unmet dependencies:
> xserver-xorg-video-all: Depends: xserver-xorg-video-apm but it is not installable
> Depends: xserver-xorg-video-ark but it is not installable
> Depends: xserver-xorg-video-ati but it is not installable
> Depends: xserver-xorg-video-fbdev but it is not installable
[...]

Sounds like aptitude is busted, and we shouldn't recommend to use it for
upgrades. These packages are all installable in lenny.

Cheers,
Julien

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501546: Forgot the important content

2008-10-08T03:52:26Z

Hi!

Seems that the attached screenshot didn't got forwarded. Good, so I could play with gocr-tcl :)
(Note: gocr seems to didn't like the "o"s in the original screenshot as well as other problems; I hope I fixed the important part at the end.)

Content follows:

===================================
libcuculO libcurl3-gnutls libdb4.2 libdb4.2-dev libdb4.3 libdb4.4 libdbd-mysql-perl libdbi-perl libdevel-symdump-perl libdigest-hmac-perl libdigest-md4-perl libdigest-shal-perl libdmxl libdrm2 libdv4
libedata-baakl.2-2 libedit2 libeel2-data libenchantlc2a libeventl libexifl2 libexpatl libfamO libfile-rsyncp-perl libfant-afm-perl libfantcanfigl libfantencl libfribidiO libfs6 libgclc2 libgccl libgcanf2-4
libgd2-naxpm libgda2-3 libgda2-bin libgda2-camman libgdl-l-O libgdl-l-camman libgksu2-O libgll-mesa-glx libglib2.O-data libglul-mesa libgmp3c2 libgname-mediaO libgname-menu2 libgname-windaw-settingsl
libgnamecanvas2-O libgnamecanvas2-camman libgstreamer-plugins-baseO.lO-O libgstreamerO.lO-O libgtk2.O-bin libgtk2.O-camman libgtksaurceview-camman libgtksaurceviewl.O-O libgtkspellO libgutenprint2 libhal-staragel
libhtml-farmat-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libice6 libidlO libidnll libia-sacket-ssl-perl libiadbc2 libiadbc2-dev libjpeg62 libklibc liblcmsl libldap2-dev liblacale-gettext-perl
liblackfile-simple-perl liblackfilel libltdl3 liblza2-2 libmadO libmagicl libmail-sendmail-perl libmail-spf-query-perl libmailtaals-perl libmudflapO libmudflapO-dev libmysqlclientlSaff libnautilus-extensianl
libncursesS libncursesS-dev libnet-cidr-lite-perl libnet-dns-perl libnet-imap-perl libnet-ldap-perl libnet-ssleay-perl libnetpbmlO libnfsidmap2 libnatifyl libnspr4-Od libnss-db libnss-ldap libnss-lwres libaggO
libailO.3 libaspS libastylelc2 libpam-ldap libpam-madules libpam-runtime libpaper-utils libpaperl libpcapO.8 libpngl2-O libprintercanfOc2a libqt3-mt libqt4-gui libqt4-qt3suppart libqt4-sql librawl394-8 libreadlineS
libreadlineS-dev librpcsecgss3 librrds-perl librsvg2-bin librsyncl libsasl2-2 libsasl2-dev libsasl2-madules libscrallkeeperO libsepall libsexy2 libshaut3 libslp-dev libslpl libsm6 libsmbclient libsnmpkit2c2a
libsacket6-perl libspeexl libss2 libstartup-natificatianO libstdcS libsys-hastname-lang-perl libsys-syslag-perl libsysfs2 libtaglc2a libtdbl libterm-readline-gnu-perl libtext-chaidth-perl libtext-icanv-perl
libtext-wrapil8n-perl libtextwrapl libthearaO libtiff-taals libtiff4 libtimedate-perl libunicade-map-perl libunicade-map8-perl libunicade-string-perl liburi-perl libusb-O.l-4 libuuidl libvisual-O.4-O
libvisual-O.4-plugins libvalume-idO libvarbisOa libvarbisenc2 libvarbisfile3 libvte-camman libwnck-camman libwrapO libwrapO-dev libxll-6 libxll-data libxau6 libxaw7 libxcursarl libxdmcp6 libxext6 libxfixes3
libxfantl libxft2 libxi6 libxineramal libxkbfilel libxml-libxml-camman-perl libxml-libxml-perl libxml-parser-perl libxml-sax-perl libxml-simple-perl libxml2-utils libxmu6 libxmuul libxpm4 libxrenderl libxresl
libxsltl.l libxssl libxt6 libxtrap6 libxtst6 libxvl libxxf86dgal libxxf86miscl libxxf86vml libzzip-O-l2 linux-image-2.6-486 lackfile-prags lagcheck lagcheck-database lagin lagtail laap-aes-madules-2.6-486 lsb
lsb-base lsb-cxx lsb-desktap lsb-graphics lsb-release lsaf lwresd lynx m4 mailagent mailx make makedev man-db man2html manpages manpages-dev mawk mc mdadm memtest86 memtester menu menu-xdg mgetty migratiantaals
mime-suppart minicam mktemp madcanf madule-assistant madule-init-taals mally-guard maunt mpack mpgl23 mpg32l mtaals mtr-tiny mutt mybashburn myspell-en-us mysql-client-S.O mysql-camman mysql-server mysql-server-S.O
nana nautilus nautilus-cd-burner nautilus-data nbtscan ncurses-base ncurses-bin ncurses-term net-taals netbase netcat netpbm nfs-camman nfs-kernel-server ng-utils nmap narmalize-audia natificatian-daeman nscd ntp
ntpdate nvi apen-iscsi apenbsd-inetd apenjade apensp apenssh-blacklist apenssh-client apenssh-server apenssl apenvpn ass-campat pOf par2 passwd patch pax pciutils pcanf-detect perl-base phpS-camman pidentd
pkg-canfig pa-debcanf partmap pawermgmt-base ppp pppcanfig pppae pppaecanf pppstatus pptpd pracinfa pracps praftpd praftpd-dac psfantmgr psmisc pythan-gdbm pythan-ipy pyzar qt4-qtcanfig quagga quagga-dac rcs re2c
readline-camman resalvcanf rpm rrdtaal rsync sa-exim samba samba-camman samba-dac sasl2-bin scrallkeeper scsitaals sed sensard shared-mime-infa sharutils sharewall slapd smartmantaals smbclient smbfs smbldap-taals
snmp snmpd spamc squid squid-cgi squid-camman squirrelmail squirrelmail-lacales ssh strace suda swish sysklagd syslag-summary sysv-rc sysvinit sysvinit-utils tar tcl8.4 tcpd tcpdump tdb-dev telnet texinfa time
tk8.4 tafradas traceraute transfig ttf-dejavu type-handling ucf udev unisan unrar unzip update-inetd usbutils util-linux vim vim-camman vim-runtime varbis-taals w3-recs w3m wamerican wbritish wget whiptail whais
wadim x-ttcidfant-canf xll-camman xbase-clients xfants-lOOdpi xfants-7Sdpi xfants-base xfants-encadings xfants-utils xkb-data xml-care xpdf-camman xpdf-utils xserver-xarg xserver-xarg-care xserver-xarg-input-all
xserver-xarg-input-evdev xserver-xarg-input-kbd xserver-xarg-input-mause xserver-xarg-input-synaptics xserver-xarg-input-wacam xserver-xarg-videa-chips xserver-xarg-videa-cirrus xserver-xarg-videa-cyrix
xserver-xarg-videa-dummy xserver-xarg-videa-il28 xserver-xarg-videa-i74O xserver-xarg-videa-i8lO xserver-xarg-videa-imstt xserver-xarg-videa-neamagic xserver-xarg-videa-savage xserver-xarg-videa-sisusb
xserver-xarg-videa-tseng xserver-xarg-videa-vmware xserver-xarg-videa-vaadaa xsltprac xterm xutils xutils-dev yelp zenity
The fallawing partially installed packages will be canfigured:
deskbar-applet faamatic-gui ghastscript-x gname-menus gs-esp hpijs hplip ldap-utils libbanabaui2-O libgail-camman libgaill8 libglade2-O libgname-desktap-2 libgnameprint2.2-O libgnameprintui2.2-O libgnameui-O
libgtk2.O-O libgtkhtml2-O libmetacityO libnautilus-burn4 libpanel-applet2-O libpangal.O-O libpangal.O-camman libperl-dev libperlS.lO librsvg2-2 librsvg2-camman libsnmplS libtatem-plparserlO libwnck22 lib -perl
lm-sensars metacity perl perl-dac perl-madules pythan-beagle pythan-glade2 pythan-gmenu pythan-gname2 pythan-gname2-desktap pythan-gtk2 pythan-gtkhtml2 spamassassin
The fallawing packages are COmmENDED but will N be installed:
fam
688 packages upgraded, l74 newly installed, 97 ta remave and O nat upgraded.
Need ta get 3992kB/S6OmB af archives. After unpacking 383mB will be used.
The following packages have unmet dependencies:
xserver-xorg-video-all: Depends: xserver-xorg-video-apm but it is not installable
Depends: xserver-xorg-video-ark but it is not installable
Depends: xserver-xorg-video-ati but it is not installable
Depends: xserver-xorg-video-fbdev but it is not installable
Depends: xserver-xorg-video-glint but it is not installable
Depends: xserver-xorg-video-mga but it is not installable
Depends: xserver-xorg-video-nsc but it is not installable
Depends: xserver-xorg-video-nv but it is not installable
Depends: xserver-xorg-video-rendition but it is not installable
Depends: xserver-xorg-video-s3 but it is not installable
Depends: xserver-xorg-video-s3virge but it is not installable
Depends: xserver-xorg-video-siliconmotion but it is not installable
Depends: xserver-xorg-video-sis but it is not installable
Depends: xserver-xorg-video-tdfx but it is not installable
Depends: xserver-xorg-video-tga but it is not installable
Depends: xserver-xorg-video-trident but it is not installable
Depends: xserver-xorg-video-vesa but it is not installable
Depends: xserver-xorg-video-vga but it is not installable
Depends: xserver-xorg-video-openchrome but it is not installable or
xserver-xorg-video-via but it is not installable
Depends: xserver-xorg-video-v4l but it is not installable
libft-perl: Depends: perlapi-5.8.8 which is a virtual package.
libapache-mad-php5: Depends: php5-common (= 5.2.O-1O+lenny1 but 5.2.6-4 is to be installed.
The following actions will resolve these dependencies:

Remove the following packages:
libft-perl
xserver-xorg-video-all

Install the following packages:
fam [2.7.O-13.3 (testing)]

Keep the fallawing packages at their current versian:
libapache-mod-php5 [5.2.0-8+etch11 (now)]
php5-common [5.2.0-8+etch11 (now)]

Leave the fallawing dependencies unresalved:
defoma recommends libft-perl
Score is -3O1

Accept this solution? [Y/n/q/?]

===================================

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501546: (fwd) Re: What you can do for "Lenny" [steven@suse.com.au]

2008-10-08T02:39:00Z

Package: upgrade-reports

Since that was a private report I received, I mangeled the e-mail
address; should there be questions to him, I'll proxy them through.

Best regards,
Alexander

----- Forwarded message from Steven O'Connor <steven@...> -----

From: Steven O'Connor <steven@...>
Subject: Re: What you can do for "Lenny"
To: tolimar@...
Date: Wed, 08 Oct 2008 19:49:00 +1100

1. Make backups
2. Change your /etc/apt/sources.list
3. Run aptitude update to get information about new packages
4. Run aptitude install dpkg aptitude apt to install the newest package
management
5. Run aptitude full-upgrade

Followed instructions as above and got errors on several packages (see
attached screen shot taken when step 5 is repeated)

clamd is refusing connections from exim/spamassassin
and squid fails to start.

###### /var/log/syslog #####

Oct 8 19:23:33 stargate squid[8164]: Starting Squid Cache version
2.6.STABLE5 for i386-debian-linux-gnu...
Oct 8 19:23:33 stargate squid[8164]: Process ID 8164
Oct 8 19:23:33 stargate squid[8164]: With 1024 file descriptors available
Oct 8 19:23:33 stargate squid[8164]: Using epoll for the IO loop
Oct 8 19:23:33 stargate squid[8164]: DNS Socket created at 0.0.0.0, port
1215, FD 6
Oct 8 19:23:33 stargate squid[8164]: Adding nameserver 127.0.0.1 from
/etc/resolv.conf
Oct 8 19:23:33 stargate squid[8164]: Adding domain local.suse.com.au from
/etc/resolv.conf
Oct 8 19:23:33 stargate squid[8164]: Adding nameserver 192.168.2.1 from
/etc/resolv.conf
Oct 8 19:23:33 stargate squid[8164]: helperOpenServers: Starting 15
'adzapper.wrapper' processes
Oct 8 19:23:34 stargate squid[8164]: User-Agent logging is disabled.
Oct 8 19:23:34 stargate squid[8164]: Referer logging is disabled.
Oct 8 19:23:35 stargate squid[8164]: Unlinkd pipe opened on FD 25
Oct 8 19:23:35 stargate squid[8164]: Swap maxSize 102400 KB, estimated
7876 objects
Oct 8 19:23:35 stargate squid[8164]: Target number of buckets: 393
Oct 8 19:23:35 stargate squid[8164]: Using 8192 Store buckets
Oct 8 19:23:35 stargate squid[8164]: Max Mem size: 8192 KB
Oct 8 19:23:35 stargate squid[8164]: Max Swap size: 102400 KB
Oct 8 19:23:35 stargate squid[8164]: Local cache digest enabled;
rebuild/rewrite every 3600/3600 sec
Oct 8 19:23:35 stargate squid[8164]: Rebuilding storage in
/var/spool/squid (DIRTY)
Oct 8 19:23:35 stargate squid[8164]: Using Least Load store dir selection
Oct 8 19:23:35 stargate squid[8164]: Set Current Directory to
/var/spool/squid
Oct 8 19:23:36 stargate squid[8164]: Loaded Icons.
Oct 8 19:23:36 stargate squid[8164]: Accepting proxy HTTP connections at
0.0.0.0, port 8080, FD 27.
Oct 8 19:23:36 stargate squid[8164]: Accepting proxy HTTP connections at
0.0.0.0, port 3128, FD 28.
Oct 8 19:23:36 stargate squid[8164]: Accepting ICP messages at 0.0.0.0,
port 3130, FD 29.
Oct 8 19:23:36 stargate squid[8164]: HTCP Disabled.
Oct 8 19:23:36 stargate squid[8164]: WCCP Disabled.
Oct 8 19:23:37 stargate squid[8164]: Ready to serve requests.
Oct 8 19:23:37 stargate squid[8164]: WARNING: url_rewriter #15 (FD 21)
exited
Oct 8 19:23:37 stargate squid[8164]: WARNING: url_rewriter #14 (FD 20)
exited
Oct 8 19:23:37 stargate squid[8164]: WARNING: url_rewriter #13 (FD 19)
exited
Oct 8 19:23:37 stargate squid[8164]: WARNING: url_rewriter #12 (FD 18)
exited
Oct 8 19:23:37 stargate squid[8164]: WARNING: url_rewriter #11 (FD 17)
exited
Oct 8 19:23:37 stargate squid[8164]: WARNING: url_rewriter #10 (FD 16)
exited
Oct 8 19:23:37 stargate squid[8164]: WARNING: url_rewriter #9 (FD 15)
exited
Oct 8 19:23:37 stargate squid[8164]: WARNING: url_rewriter #8 (FD 14)
exited
Oct 8 19:23:37 stargate squid[8164]: Too few url_rewriter processes are
running
Oct 8 19:23:37 stargate squid[8164]: The url_rewriter helpers are crashing
too rapidly, need help!
Oct 8 19:23:37 stargate squid[8084]: Squid Parent: child process 8164
exited due to signal 6
Oct 8 19:23:37 stargate squid[8084]: Exiting due to repeated, frequent
failures

#########################

Apart from this everything seems to be working.

I hope this helps get lenny out the door.

Regards

Steve

----- End forwarded message -----

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Bug#501518: upgrade-reports: etch->lenny works better with etch's apt-get than lenny's aptitude

2008-10-07T17:34:40Z

Package: upgrade-reports
Severity: normal

On an etch box with X, KDE and assorted office-type applications
installed, I followed the sequence of steps outlined on d-d-a [1]:

aptitude update && aptitude upgrade
sed -i 's/etch/lenny/g' /etc/apt/sources.list
aptitude update
aptitude install dpkg aptitude

So far, so good. The next step is the problematic one.

aptitude full-upgrade:
xserver-xorg-video-all is "broken" as the individual video drivers are
"not installable". This leads to 95 other packages being removed
including a lot of graphical ones, but not all of xorg or kde.

Saying "n" twice to get aptitude to look for a different solution
causes it to come up with what seems like a more sensible solution.

aptitude full-upgrade xserver-xorg-video-all+
Hinting at the installation of the video drivers (or indeed just the
video driver package you need) goes straight to the same sensible
solution as above.

apt-get dist-upgrade
Using etch's apt-get for the upgrade wants to remove 15 packages, none
of which I'm that attached to so it would also be a "sensible"
solution to the upgrade. (for the record: fftw3 libdiscover1
libft-perl libgfortran1 libgsl0 libgssapi2 libldap2 libpci2
libperl5.8 librpm4 libsasl2 libstlport4.6c2
selinux-policy-refpolicy-targeted tetex-doc
xserver-xorg-video-newport)

Perhaps this is as you would expect, but it's pretty unnerving being
presented with a long list of broken packages and removals. Some degree
of documentation of this would be good in that case.

Following this, the upgrade completed successfully.

[1] http://lists.debian.org/debian-devel-announce/2008/10/msg00000.html

-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (100, 'stable'), (60, 'testing'), (50, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-686
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)

--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

Re: transition to lenny stable

2008-10-03T18:55:46Z

Mark Allums wrote:

> As I understand it, as lenny becomes stable, it will be updated rarely,
> and mainly for security updates. So you will want to stay with it for a
> couple of months (is all the time to stay there), and then move back to
> testing. Stable is used for stability, of course, not for being the
> best choice for your apps. There will be many desirable things in
> testing that will never be added to stable, and you will want to be able
> to get them.

Replying to myself:

I should clarify: Things will not be added to the *current* stable.
Future stables will of course contain new or updated things.

MArk Allums

--
To UNSUBSCRIBE, email to debian-testing-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...