Community Server - PEAR

[thomasW]

Hy all,

where can I find pear and/or pecl within the community server ?
I looked around  but I only found the php.ini file.

In detail:
I am in need of phpunit and xdebug and therefor I would need pear.

Thanks for the effort

Greetings
Thomas

[thomasW]

I was logged in with ssh / telnet but wether pear nor pecl were recognised.
"command not installed"

And also the path as mentioned in wiki to php (where pear is installed
normally) is not avaiable.

Any other help ?

Greetings
Thomas


----- Original Message -----
From: "Richard Thomas" <lists@...>
To: "Thomas Weidner" <thomas.weidner@...>
Cc: <fw-server@...>
Sent: Wednesday, April 18, 2007 2:18 PM
Subject: Re: [fw-server] Community Server - PEAR

> You should be able to type pear install while logged in without problem
>
> On 4/18/07, Thomas Weidner <thomas.weidner@...> wrote:
>> Hy all,
>>
>> where can I find pear and/or pecl within the community server ?
>> I looked around  but I only found the php.ini file.
>>
>> In detail:
>> I am in need of phpunit and xdebug and therefor I would need pear.
>>
>> Thanks for the effort
>>
>> Greetings
>> Thomas
>>

[Matthew Ratzloff]

From now on, can everyone make sure to 'Reply to All'?  I may be actively
using the server space in the near future and it'd be nice to gain the
shared experience of getting everything set up.

Thanks,

-Matt

On Wed, April 18, 2007 5:51 am, Thomas Weidner wrote:

> I was logged in with ssh / telnet but wether pear nor pecl were
> recognised.
> "command not installed"
>
> And also the path as mentioned in wiki to php (where pear is installed
> normally) is not avaiable.
>
> Any other help ?
>
> Greetings
> Thomas
>
>
> ----- Original Message -----
> From: "Richard Thomas" <lists@...>
> To: "Thomas Weidner" <thomas.weidner@...>
> Cc: <fw-server@...>
> Sent: Wednesday, April 18, 2007 2:18 PM
> Subject: Re: [fw-server] Community Server - PEAR
>
>
>> You should be able to type pear install while logged in without problem
>>
>> On 4/18/07, Thomas Weidner <thomas.weidner@...> wrote:
>>> Hy all,
>>>
>>> where can I find pear and/or pecl within the community server ?
>>> I looked around  but I only found the php.ini file.
>>>
>>> In detail:
>>> I am in need of phpunit and xdebug and therefor I would need pear.
>>>
>>> Thanks for the effort
>>>
>>> Greetings
>>> Thomas

[thomasW]

Sorry Matthew... I must apologize.
I thought that I had wrote CC to the list as always.

Greetings
Thomas


----- Original Message -----
From: "Matthew Ratzloff" <matt@...>
To: <fw-server@...>
Sent: Wednesday, April 18, 2007 6:14 PM
Subject: Re: [fw-server] Community Server - PEAR

> >From now on, can everyone make sure to 'Reply to All'?  I may be actively
> using the server space in the near future and it'd be nice to gain the
> shared experience of getting everything set up.
>
> Thanks,
>
> -Matt
>
> On Wed, April 18, 2007 5:51 am, Thomas Weidner wrote:
>> I was logged in with ssh / telnet but wether pear nor pecl were
>> recognised.
>> "command not installed"
>>
>> And also the path as mentioned in wiki to php (where pear is installed
>> normally) is not avaiable.
>>
>> Any other help ?
>>
>> Greetings
>> Thomas
>>
>>
>> ----- Original Message -----
>> From: "Richard Thomas" <lists@...>
>> To: "Thomas Weidner" <thomas.weidner@...>
>> Cc: <fw-server@...>
>> Sent: Wednesday, April 18, 2007 2:18 PM
>> Subject: Re: [fw-server] Community Server - PEAR
>>
>>
>>> You should be able to type pear install while logged in without problem
>>>
>>> On 4/18/07, Thomas Weidner <thomas.weidner@...> wrote:
>>>> Hy all,
>>>>
>>>> where can I find pear and/or pecl within the community server ?
>>>> I looked around  but I only found the php.ini file.
>>>>
>>>> In detail:
>>>> I am in need of phpunit and xdebug and therefor I would need pear.
>>>>
>>>> Thanks for the effort
>>>>
>>>> Greetings
>>>> Thomas

[thomasW]

Nope... :-(
-bash: lynx: command not found

Greetings
Thomas

----- Original Message -----
From: "Richard Thomas" <lists@...>
To: "Thomas Weidner" <thomas.weidner@...>
Cc: <matt@...>; <fw-server@...>
Sent: Wednesday, April 18, 2007 9:34 PM
Subject: Re: [fw-server] Community Server - PEAR

> It seems the recent reload rpms for php5 don't have a pear package
>
> Try lynx -source http://go-pear.org/ | php and let me know if that
> gets you going.
>
> On 4/18/07, Thomas Weidner <thomas.weidner@...> wrote:
>> Sorry Matthew... I must apologize.
>> I thought that I had wrote CC to the list as always.
>>
>> Greetings
>> Thomas
>>
>>
>> ----- Original Message -----
>> From: "Matthew Ratzloff" <matt@...>
>> To: <fw-server@...>
>> Sent: Wednesday, April 18, 2007 6:14 PM
>> Subject: Re: [fw-server] Community Server - PEAR
>>
>>
>> > >From now on, can everyone make sure to 'Reply to All'?  I may be
>> > >actively
>> > using the server space in the near future and it'd be nice to gain the
>> > shared experience of getting everything set up.
>> >
>> > Thanks,
>> >
>> > -Matt
>> >
>> > On Wed, April 18, 2007 5:51 am, Thomas Weidner wrote:
>> >> I was logged in with ssh / telnet but wether pear nor pecl were
>> >> recognised.
>> >> "command not installed"
>> >>
>> >> And also the path as mentioned in wiki to php (where pear is installed
>> >> normally) is not avaiable.
>> >>
>> >> Any other help ?
>> >>
>> >> Greetings
>> >> Thomas
>> >>
>> >>
>> >> ----- Original Message -----
>> >> From: "Richard Thomas" <lists@...>
>> >> To: "Thomas Weidner" <thomas.weidner@...>
>> >> Cc: <fw-server@...>
>> >> Sent: Wednesday, April 18, 2007 2:18 PM
>> >> Subject: Re: [fw-server] Community Server - PEAR
>> >>
>> >>
>> >>> You should be able to type pear install while logged in without
>> >>> problem
>> >>>
>> >>> On 4/18/07, Thomas Weidner <thomas.weidner@...> wrote:
>> >>>> Hy all,
>> >>>>
>> >>>> where can I find pear and/or pecl within the community server ?
>> >>>> I looked around  but I only found the php.ini file.
>> >>>>
>> >>>> In detail:
>> >>>> I am in need of phpunit and xdebug and therefor I would need pear.
>> >>>>
>> >>>> Thanks for the effort
>> >>>>
>> >>>> Greetings
>> >>>> Thomas
>>
>>

[thomasW]

Ah...

This worked.
Just one small thing...
I had no permission for standard installation to /usr
So I had to change this to /home/USER

Thanks Eric :-)

Greetings
Thomas


----- Original Message -----
From: "Eric Coleman" <eric@...>
To: "Thomas Weidner" <thomas.weidner@...>
Sent: Wednesday, April 18, 2007 10:08 PM
Subject: Re: [fw-server] Community Server - PEAR

> use curl to get the file:
>
> curl -L http://go-pear.org/ | php -q
>
> On 4/18/07, Thomas Weidner <thomas.weidner@...> wrote:
>> Nope... :-(
>> -bash: lynx: command not found
>>
>> Greetings
>> Thomas
>>
>> ----- Original Message -----
>> From: "Richard Thomas" <lists@...>
>> To: "Thomas Weidner" <thomas.weidner@...>
>> Cc: <matt@...>; <fw-server@...>
>> Sent: Wednesday, April 18, 2007 9:34 PM
>> Subject: Re: [fw-server] Community Server - PEAR
>>
>>
>> > It seems the recent reload rpms for php5 don't have a pear package
>> >
>> > Try lynx -source http://go-pear.org/ | php and let me know if that
>> > gets you going.
>> >
>> > On 4/18/07, Thomas Weidner <thomas.weidner@...> wrote:
>> >> Sorry Matthew... I must apologize.
>> >> I thought that I had wrote CC to the list as always.
>> >>
>> >> Greetings
>> >> Thomas
>> >>
>> >>
>> >> ----- Original Message -----
>> >> From: "Matthew Ratzloff" <matt@...>
>> >> To: <fw-server@...>
>> >> Sent: Wednesday, April 18, 2007 6:14 PM
>> >> Subject: Re: [fw-server] Community Server - PEAR
>> >>
>> >>
>> >> > >From now on, can everyone make sure to 'Reply to All'?  I may be
>> >> > >actively
>> >> > using the server space in the near future and it'd be nice to gain
>> >> > the
>> >> > shared experience of getting everything set up.
>> >> >
>> >> > Thanks,
>> >> >
>> >> > -Matt
>> >> >
>> >> > On Wed, April 18, 2007 5:51 am, Thomas Weidner wrote:
>> >> >> I was logged in with ssh / telnet but wether pear nor pecl were
>> >> >> recognised.
>> >> >> "command not installed"
>> >> >>
>> >> >> And also the path as mentioned in wiki to php (where pear is
>> >> >> installed
>> >> >> normally) is not avaiable.
>> >> >>
>> >> >> Any other help ?
>> >> >>
>> >> >> Greetings
>> >> >> Thomas
>> >> >>
>> >> >>
>> >> >> ----- Original Message -----
>> >> >> From: "Richard Thomas" <lists@...>
>> >> >> To: "Thomas Weidner" <thomas.weidner@...>
>> >> >> Cc: <fw-server@...>
>> >> >> Sent: Wednesday, April 18, 2007 2:18 PM
>> >> >> Subject: Re: [fw-server] Community Server - PEAR
>> >> >>
>> >> >>
>> >> >>> You should be able to type pear install while logged in without
>> >> >>> problem
>> >> >>>
>> >> >>> On 4/18/07, Thomas Weidner <thomas.weidner@...> wrote:
>> >> >>>> Hy all,
>> >> >>>>
>> >> >>>> where can I find pear and/or pecl within the community server ?
>> >> >>>> I looked around  but I only found the php.ini file.
>> >> >>>>
>> >> >>>> In detail:
>> >> >>>> I am in need of phpunit and xdebug and therefor I would need
>> >> >>>> pear.
>> >> >>>>
>> >> >>>> Thanks for the effort
>> >> >>>>
>> >> >>>> Greetings
>> >> >>>> Thomas
>> >>
>> >>
>>
>>