Can't get 3.0.23d from SuSE RPM to be a member in an NT4 domain

[Jay R. Ashworth]

Been working with Samba back to 1.9 or so, but this is the first time
I've tried to set it up as a domain member server.

I followed (I think) the instructions on how to do this in TOSHARG
(which are about as disjointed as the book, which I took back), but I
continue to be unable to get the box, running winbind, to reliably
authenticate users off the PDC, which is running NT4 (and I'm not sure
which SP, if it matters) and Exchange 5.5, which precludes me from
simply vampiring it and decommissioning it... unless there's no
solution on the Samba front.

The errors I get are the (I gather, ever-popular):

[2008/05/06 11:15:01, 0]
rpc_client/cli_pipe.c:cli_rpc_pipe_open_noauth(2265)
  cli_rpc_pipe_open_noauth: rpc_pipe_bind for pipe \lsarpc failed with
  error NT_STATUS_BUFFER_TOO_SMALL

in /var/log/samba/log.wb-CORP (CORP being the name of my domain), and
also in log.winbindd; in my log.winbindd-dc-connect, I get those,
interspersed with:

[2008/05/06 11:15:01, 1] libsmb/clientgen.c:cli_rpc_pipe_close(376)
  cli_rpc_pipe_close: cli_close failed on pipe \samr, fnum 0x4009 to
  machine VICIEXCHANGE.  Error was SUCCESS - 0
[2008/05/06 11:15:01, 1] libsmb/clientgen.c:cli_rpc_pipe_close(376)
  cli_rpc_pipe_close: cli_close failed on pipe \NETLOGON, fnum 0x4007
  to machine VICIEXCHANGE.  Error was SUCCESS - 0

net rpc testjoin says: Join to 'CORP' is OK

and wbinfo -u and -g give reasonable answers, based on the user list on
my PDC.

I'll be happy to supply smb.conf and any other information that seems
warranted, but hopefully this is enough to provide a start to some
helpful person... :-)  This seems to be a question that is much-asked
and little-answered, based on all my googling...

Cheers,
-- jra
--
Jay R. Ashworth                   Baylink                      jra@...
Designer                     The Things I Think                       RFC 2100
Ashworth & Associates     http://baylink.pitas.com                     '87 e24
St Petersburg FL USA      http://photo.imageinc.us             [phone]

             Those who cast the vote decide nothing.
             Those who count the vote decide everything.
               -- (Joseph Stalin)
--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba

[Jay R. Ashworth]

A week ago, May 06, 2008 at 11:22:24AM -0400, I wrote:
> I followed (I think) the instructions on how to do this in TOSHARG
> (which are about as disjointed as the book, which I took back), but I
> continue to be unable to get the box, running winbind, to reliably
> authenticate users off the PDC, which is running NT4 (and I'm not sure
> which SP, if it matters) and Exchange 5.5, which precludes me from
> simply vampiring it and decommissioning it... unless there's no
> solution on the Samba front.

[ ... ]

> I'll be happy to supply smb.conf and any other information that seems
> warranted, but hopefully this is enough to provide a start to some
> helpful person... :-)  This seems to be a question that is much-asked
> and little-answered, based on all my googling...

No help on this at all, huh?  Is "Samba 3 as a member server in an NT
domain" not a supported configuration, then?

Cheers,
-- jra
--
Jay R. Ashworth                   Baylink                      jra@...
Designer                     The Things I Think                       RFC 2100
Ashworth & Associates     http://baylink.pitas.com                     '87 e24
St Petersburg FL USA      http://photo.imageinc.us             [phone]

             Those who cast the vote decide nothing.
             Those who count the vote decide everything.
               -- (Joseph Stalin)
--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba

[Sunny-32]

On Mon, May 12, 2008 at 10:49 AM, Jay R. Ashworth <jra@...> wrote:

>
> A week ago, May 06, 2008 at 11:22:24AM -0400, I wrote:
> > I followed (I think) the instructions on how to do this in TOSHARG
> > (which are about as disjointed as the book, which I took back), but I
> > continue to be unable to get the box, running winbind, to reliably
> > authenticate users off the PDC, which is running NT4 (and I'm not sure
> > which SP, if it matters) and Exchange 5.5, which precludes me from
> > simply vampiring it and decommissioning it... unless there's no
> > solution on the Samba front.
>
> [ ... ]
>
> > I'll be happy to supply smb.conf and any other information that seems
> > warranted, but hopefully this is enough to provide a start to some
> > helpful person... :-)  This seems to be a question that is much-asked
> > and little-answered, based on all my googling...
>
> No help on this at all, huh?  Is "Samba 3 as a member server in an NT
> domain" not a supported configuration, then?
>

Which version of opensuse you are running. I had similar problems with
10.2, but with 10.3 and samba 3.0.26a-3.5 everything is OK.

--
Svetoslav Milenov (Sunny)

Even the most advanced equipment in the hands of the ignorant is just
a pile of scrap.
--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba

[Jay R. Ashworth]

On Tue, May 13, 2008 at 09:40:07AM -0500, Sunny wrote:
> Which version of opensuse you are running. I had similar problems with
> 10.2, but with 10.3 and samba 3.0.26a-3.5 everything is OK.

I am, in fact, using 10.2 and 3.0.23.  I'll upgrade the machine after
we get the hardware problems sorted, and see if it plays.  Thanks.

Cheers,
-- jra
--
Jay R. Ashworth                   Baylink                      jra@...
Designer                     The Things I Think                       RFC 2100
Ashworth & Associates     http://baylink.pitas.com                     '87 e24
St Petersburg FL USA      http://photo.imageinc.us             [phone]

             Those who cast the vote decide nothing.
             Those who count the vote decide everything.
               -- (Joseph Stalin)
--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba