Bug when Double-side print in evince

[Linuxer Wang]

Hi, everybody

I encountered the double-side print problem with evince, and Nickolay
replied that it may be gnome-print problem.
I don't know if this problem is reported by other one, so, please help
me to solve it.

Thank you so much,

BTW I am using FC4.


В Пнд, 22/08/2005 в 15:55 -0700, Linuxer Wang пишет:

> Hello, everybody
>
> I am using evince version 0.3.1, the double-side print actually dosen't
> work as I imagined.
> I create an open office document, and adjust the left edge to be 2cm,
> and the right edge to be 1cm, then I print it with double-side (No reverse).
> But the even numbered page is printed just as printed with no double print.
> So, I am not sure in this version the double-side print really work.
>
> I like evince very much.
> Yours,
>
>

Hi. This really should be gnome-print problem. Can you file bug in gnome
bugzilla? Please check if other gnome applications like pdf has the same
problem.

Thanks for using evince.

> _______________________________________________
> Evince-list mailing list
> Evince-list@...
> http://mail.gnome.org/mailman/listinfo/evince-list


_______________________________________________
gnome-print-list mailing list
gnome-print-list@...
http://mail.gnome.org/mailman/listinfo/gnome-print-list

[Jody Goldberg-2]

On Wed, Aug 24, 2005 at 05:19:54PM -0700, Linuxer Wang wrote:

> Hi, everybody
>
> I encountered the double-side print problem with evince, and Nickolay
> replied that it may be gnome-print problem.
> I don't know if this problem is reported by other one, so, please help
> me to solve it.
>
> Thank you so much,
>
> BTW I am using FC4.

It just appeared in bugzilla.  I'll have a look on Friday.
_______________________________________________
gnome-print-list mailing list
gnome-print-list@...
http://mail.gnome.org/mailman/listinfo/gnome-print-list

[Andreas J. Guelzow]

On Wed, 2005-24-08 at 17:19 -0700, Linuxer Wang wrote:
> Hi, everybody
>
> I encountered the double-side print problem with evince, and Nickolay
> replied that it may be gnome-print problem.
> I don't know if this problem is reported by other one, so, please help
> me to solve it.

Reading your message below I am not sure what you are expecting and what
you are indeed observing. Gnome-print does not handle even/odd page
margin adjustments. That's basically up to the application (evince in
this case).

Moreover, I believe that evince really only ships the complete
postscript code to gnome-print in which case gnome print will not
perform _any_ adjustments.


> В Пнд, 22/08/2005 в 15:55 -0700, Linuxer Wang пишет:
> > Hello, everybody
> >
> > I am using evince version 0.3.1, the double-side print actually dosen't
> > work as I imagined.

how did you imagine it to work?

> > I create an open office document, and adjust the left edge to be 2cm,
> > and the right edge to be 1cm, then I print it with double-side (No reverse).
> > But the even numbered page is printed just as printed with no double print.
> > So, I am not sure in this version the double-side print really work.

For applications that use the standard gnome-print printing commands (I
doubt that evince is one of them. Try gnumeric with a duplex capable
printer.) gnomeprint will ask the printer to print duplex. It will _not_
modify the page! That's up to the application.

Andreas

> >
> Hi. This really should be gnome-print problem. Can you file bug in gnome
> bugzilla? Please check if other gnome applications like pdf has the same
> problem.

--
Andreas J. Guelzow
Taliesin Software, Shelties, Pyr Sheps
and Shetland Sheep


_______________________________________________
gnome-print-list mailing list
gnome-print-list@...
http://mail.gnome.org/mailman/listinfo/gnome-print-list

[Linuxer Wang]

Ok, thanks for your reply, I will forward your reply to the developer of
evince.
Yours,


Andreas J. Guelzow wrote:

>On Wed, 2005-24-08 at 17:19 -0700, Linuxer Wang wrote:
>  
>
>>Hi, everybody
>>
>>I encountered the double-side print problem with evince, and Nickolay
>>replied that it may be gnome-print problem.
>>I don't know if this problem is reported by other one, so, please help
>>me to solve it.
>>    
>>
>
>Reading your message below I am not sure what you are expecting and what
>you are indeed observing. Gnome-print does not handle even/odd page
>margin adjustments. That's basically up to the application (evince in
>this case).
>
>Moreover, I believe that evince really only ships the complete
>postscript code to gnome-print in which case gnome print will not
>perform _any_ adjustments.
>
>
>  
>
>>В Пнд, 22/08/2005 в 15:55 -0700, Linuxer Wang пишет:
>>    
>>
>>>Hello, everybody
>>>
>>>I am using evince version 0.3.1, the double-side print actually dosen't
>>>work as I imagined.
>>>      
>>>
>
>how did you imagine it to work?
>
>  
>
>>>I create an open office document, and adjust the left edge to be 2cm,
>>>and the right edge to be 1cm, then I print it with double-side (No reverse).
>>>But the even numbered page is printed just as printed with no double print.
>>>So, I am not sure in this version the double-side print really work.
>>>      
>>>
>
>For applications that use the standard gnome-print printing commands (I
>doubt that evince is one of them. Try gnumeric with a duplex capable
>printer.) gnomeprint will ask the printer to print duplex. It will _not_
>modify the page! That's up to the application.
>
>Andreas
>
>  
>
>>Hi. This really should be gnome-print problem. Can you file bug in gnome
>>bugzilla? Please check if other gnome applications like pdf has the same
>>problem.
>>    
>>
>
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>gnome-print-list mailing list
>gnome-print-list@...
>http://mail.gnome.org/mailman/listinfo/gnome-print-list
>  
>

_______________________________________________
gnome-print-list mailing list
gnome-print-list@...
http://mail.gnome.org/mailman/listinfo/gnome-print-list