ANT: charsets in replace-task

[Hilden]

Hello everybody,

I have a problem with charsets, by using the "replace-task" of Ant in the Eclipse IDE.
After ant relaces a token  (the value of the token comes from a ".properties-file") in an xml-file, where the charset "UTF-8" is used (<?xml version="1.0" encoding="UTF-8"?>), some special characters (such as: ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ)  are not represented correctly and Eclipse is not able to show the content of this file after the replacement.
I have already changed the charset of all concerning files to "UTF-8", but it still doesn't work.

Is there a solution for this problem? maybe a way to tell the replace-task of ant to use the UTF-8 charset.  

Thank you,

Best Regards,

Arash

[Prashant Reddy-2]

May be you have tell Eclipse to use UTF-8 encoding when showing the file
in which ANT has replaced ?


On Thu, 2008-05-08 at 06:46 -0700, Hilden wrote:

> Hello everybody,
>
> I have a problem with charsets, by using the "replace-task" of Ant in the
> Eclipse IDE.
> After ant relaces a token  (the value of the token comes from a
> ".properties-file") in an xml-file, where the charset "UTF-8" is used (<?xml
> version="1.0" encoding="UTF-8"?>), some special characters (such as:
> ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ)  are not
> represented correctly and Eclipse is not able to show the content of this
> file after the replacement.
> I have already changed the charset of all concerning files to "UTF-8", but
> it still doesn't work.
>
> Is there a solution for this problem? maybe a way to tell the replace-task
> of ant to use the UTF-8 charset.  
>
> Thank you,
>
> Best Regards,
>
> Arash
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@...
For additional commands, e-mail: user-help@...

[Hilden]

Hi,

I did this. But the main problem is not showing the file, because when I open the file through the explorer the content is shown.

The main problem ist, that the special characters are replaced by some other charcters.  


For example:

Original characters: ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ\

After the replacement: èìòùÀÈÌÒÙáéíóúý�É�ÓÚ�âêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄË�ÖÜŸçÇåÅð�øØ
 

Arash Akhoundi

iks Gesellschaft für
Informations- und
Kommunikationssysteme mbH
Siemensstraße 27
40721 Hilden
Telefon [phone]
Telefax 02103/5872-58
E-Mail mailto:a.akhoundi@...

 



-----Ursprüngliche Nachricht-----
Von: Prashant Reddy [mailto:prashant@...]
Gesendet: Donnerstag, 8. Mai 2008 15:54
An: Ant Users List
Betreff: Re: ANT: charsets in replace-task

May be you have tell Eclipse to use UTF-8 encoding when showing the file in which ANT has replaced ?


On Thu, 2008-05-08 at 06:46 -0700, Hilden wrote:

> Hello everybody,
>
> I have a problem with charsets, by using the "replace-task" of Ant in
> the Eclipse IDE.
> After ant relaces a token  (the value of the token comes from a
> ".properties-file") in an xml-file, where the charset "UTF-8" is used
> (<?xml version="1.0" encoding="UTF-8"?>), some special characters (such as:
> ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ)  are not
> represented correctly and Eclipse is not able to show the content of
> this file after the replacement.
> I have already changed the charset of all concerning files to "UTF-8",
> but it still doesn't work.
>
> Is there a solution for this problem? maybe a way to tell the
> replace-task of ant to use the UTF-8 charset.
>
> Thank you,
>
> Best Regards,
>
> Arash
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@... For additional commands, e-mail: user-help@...




________________________________________________________________________
 
iks Gesellschaft für Informations- und Kommunikationssysteme mbH
Siemensstrasse 27, 40721 Hilden, Amtsgericht Düsseldorf, HRB 45519
Geschäftsführerin: Dipl.-Inf. Monika Stoll
Prokuristen: Dipl.-Ing. (FH) Thomas Kondring & Hartwig Tödter
________________________________________________________________________
 



---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@...
For additional commands, e-mail: user-help@...

[Peter Reilly-2]

<replace encoding="utf-8" ....

Peter


On Thu, May 8, 2008 at 7:05 AM, Akhoundi, Arash <A.Akhoundi@...> wrote:

> Hi,
>
> I did this. But the main problem is not showing the file, because when I open the file through the explorer the content is shown.
>
> The main problem ist, that the special characters are replaced by some other charcters.
>
>
> For example:
>
> Original characters: ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ\
>
> After the replacement: èìòùÀÈÌÃ'ÙáÃ(c)íóúýÃ?ÉÃ?Ã"ÚÃ?âêÃ(R)ôûÂÊÎÃ"ÛãñõÃÃ'ÕäëïöüÿÄËÃ?ÖÜŸçÇåÅðÃ?øØ
>
>
> Arash Akhoundi
>
> iks Gesellschaft für
> Informations- und
> Kommunikationssysteme mbH
> Siemensstraße 27
> 40721 Hilden
> Telefon [phone]
> Telefax 02103/5872-58
> E-Mail mailto:a.akhoundi@...
>
>
>
>
>
> -----Ursprüngliche Nachricht-----
> Von: Prashant Reddy [mailto:prashant@...]
> Gesendet: Donnerstag, 8. Mai 2008 15:54
> An: Ant Users List
> Betreff: Re: ANT: charsets in replace-task
>
> May be you have tell Eclipse to use UTF-8 encoding when showing the file in which ANT has replaced ?
>
>
> On Thu, 2008-05-08 at 06:46 -0700, Hilden wrote:
>> Hello everybody,
>>
>> I have a problem with charsets, by using the "replace-task" of Ant in
>> the Eclipse IDE.
>> After ant relaces a token  (the value of the token comes from a
>> ".properties-file") in an xml-file, where the charset "UTF-8" is used
>> (<?xml version="1.0" encoding="UTF-8"?>), some special characters (such as:
>> ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ)  are not
>> represented correctly and Eclipse is not able to show the content of
>> this file after the replacement.
>> I have already changed the charset of all concerning files to "UTF-8",
>> but it still doesn't work.
>>
>> Is there a solution for this problem? maybe a way to tell the
>> replace-task of ant to use the UTF-8 charset.
>>
>> Thank you,
>>
>> Best Regards,
>>
>> Arash
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@... For additional commands, e-mail: user-help@...
>
>
>
>
> ________________________________________________________________________
>
> iks Gesellschaft für Informations- und Kommunikationssysteme mbH
> Siemensstrasse 27, 40721 Hilden, Amtsgericht Düsseldorf, HRB 45519
> Geschäftsführerin: Dipl.-Inf. Monika Stoll
> Prokuristen: Dipl.-Ing. (FH) Thomas Kondring & Hartwig Tödter
> ________________________________________________________________________
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@...
> For additional commands, e-mail: user-help@...
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@...
For additional commands, e-mail: user-help@...

[Hilden]

Thank you very much,

it works!

 

Arash Akhoundi

iks Gesellschaft für
Informations- und
Kommunikationssysteme mbH
Siemensstraße 27
40721 Hilden
Telefon [phone]
Telefax 02103/5872-58
E-Mail mailto:a.akhoundi@...

 



-----Ursprüngliche Nachricht-----
Von: Peter Reilly [mailto:peter.kitt.reilly@...]
Gesendet: Donnerstag, 8. Mai 2008 16:34
An: Ant Users List
Betreff: Re: ANT: charsets in replace-task

<replace encoding="utf-8" ....

Peter


On Thu, May 8, 2008 at 7:05 AM, Akhoundi, Arash <A.Akhoundi@...> wrote:

> Hi,
>
> I did this. But the main problem is not showing the file, because when I open the file through the explorer the content is shown.
>
> The main problem ist, that the special characters are replaced by some other charcters.
>
>
> For example:
>
> Original characters:
> ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ\
>
> After the replacement:
> èìòùÀÈÌÃ'ÙáÃ(c)íóúýÃ?ÉÃ?Ã"ÚÃ?âêÃ(R)ôûÂÊÎÃ"Ûãñ
> õÃÃ'ÕäëïöüÿÄËÃ?ÖÜŸçÇåÅðÃ?øØ
>
>
> Arash Akhoundi
>
> iks Gesellschaft für
> Informations- und
> Kommunikationssysteme mbH
> Siemensstraße 27
> 40721 Hilden
> Telefon [phone]
> Telefax 02103/5872-58
> E-Mail mailto:a.akhoundi@...
>
>
>
>
>
> -----Ursprüngliche Nachricht-----
> Von: Prashant Reddy [mailto:prashant@...]
> Gesendet: Donnerstag, 8. Mai 2008 15:54
> An: Ant Users List
> Betreff: Re: ANT: charsets in replace-task
>
> May be you have tell Eclipse to use UTF-8 encoding when showing the file in which ANT has replaced ?
>
>
> On Thu, 2008-05-08 at 06:46 -0700, Hilden wrote:
>> Hello everybody,
>>
>> I have a problem with charsets, by using the "replace-task" of Ant in
>> the Eclipse IDE.
>> After ant relaces a token  (the value of the token comes from a
>> ".properties-file") in an xml-file, where the charset "UTF-8" is used
>> (<?xml version="1.0" encoding="UTF-8"?>), some special characters (such as:
>> ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ)  are not
>> represented correctly and Eclipse is not able to show the content of
>> this file after the replacement.
>> I have already changed the charset of all concerning files to
>> "UTF-8", but it still doesn't work.
>>
>> Is there a solution for this problem? maybe a way to tell the
>> replace-task of ant to use the UTF-8 charset.
>>
>> Thank you,
>>
>> Best Regards,
>>
>> Arash
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@... For additional
> commands, e-mail: user-help@...
>
>
>
>
> ______________________________________________________________________
> __
>
> iks Gesellschaft für Informations- und Kommunikationssysteme mbH
> Siemensstrasse 27, 40721 Hilden, Amtsgericht Düsseldorf, HRB 45519
> Geschäftsführerin: Dipl.-Inf. Monika Stoll
> Prokuristen: Dipl.-Ing. (FH) Thomas Kondring & Hartwig Tödter
> ______________________________________________________________________
> __
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@... For additional
> commands, e-mail: user-help@...
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@... For additional commands, e-mail: user-help@...

[Brian Agnew]

XMLTask will handle char replacements and character sets in XML.

Brian

Hilden wrote:

> Hello everybody,
>
> I have a problem with charsets, by using the "replace-task" of Ant in the
> Eclipse IDE.
> After ant relaces a token  (the value of the token comes from a
> ".properties-file") in an xml-file, where the charset "UTF-8" is used (<?xml
> version="1.0" encoding="UTF-8"?>), some special characters (such as:
> ZàèìòùÀÈÌÒÙáéíóúýÁÉÍÓÚÝâêîôûÂÊÎÔÛãñõÃÑÕäëïöüÿÄËÏÖÜŸçÇåÅðÐøØ)  are not
> represented correctly and Eclipse is not able to show the content of this
> file after the replacement.
> I have already changed the charset of all concerning files to "UTF-8", but
> it still doesn't work.
>
> Is there a solution for this problem? maybe a way to tell the replace-task
> of ant to use the UTF-8 charset.  
>
> Thank you,
>
> Best Regards,
>
> Arash
>
>
>  

--
Brian Agnew                  http://www.oopsconsultancy.com
OOPS Consultancy Ltd         brian @ oopsconsultancy.com
Tel: [phone]
Fax: [phone]


---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@...
For additional commands, e-mail: user-help@...