|
»
»
3w_9xxx drive/lenny kernel
|
View:
New views
8 Messages
—
Rating Filter:
Alert me
|
 |
3w_9xxx drive/lenny kernel
by Nicholas Materer
::
Rate this Message:
I just updated a system from etch to lenny. With either the
linux-image-2.6.24-1-amd64 or the linux-image-2.6.22-3-amd64 kernel, my 3w_9xxxx raid controller did not function. On the console, lines and lines of PCI parity error are reported. The 2.6.18-6-amd64 from etch works fine, even after the system is updated. Unfortunately, the system boots off the raid (not the best idea) so I need to make more effect to capture the exact errors. Did not learn much from Googling. Has anyone had similar experiences with the 3w_9xxx card? Sort lspci output: 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) 08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 0a:04.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID 80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) Nick Materer -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... |
|
|
Re: 3w_9xxx drive/lenny kernel
by Markus Neviadomski-2
::
Rate this Message:
nicholas materer schrieb:
> I just updated a system from etch to lenny. With either the > linux-image-2.6.24-1-amd64 or the linux-image-2.6.22-3-amd64 kernel, my > 3w_9xxxx raid controller did not function. On the console, lines and lines > of PCI parity error are reported. The 2.6.18-6-amd64 from etch works fine, > even after the system is updated. Unfortunately, the system boots off the > raid (not the best idea) so I need to make more effect to capture the exact > errors. Did not learn much from Googling. Has anyone had similar > experiences with the 3w_9xxx card? > Did you upgraded the 3ware kernel module? Its only an idea, all my boxes with 3ware running 2.6.18, too. regards, Markus > Sort lspci output: > 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev > a3) > 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) > 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) > 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) > 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) > 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio > Controller (rev a2) > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev > a3) > 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev > a3) > 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) > 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) > 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM > Controller > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM > Controller > 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > 01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 > Controller (PHY/Link) > 02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] > (rev a2) > 08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev > 12) > 08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) > 08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev > 12) > 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) > 0a:04.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID > 80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev > a3) > 80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev > a3) > 80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) > 80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) > > Nick Materer > > > > -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... |
|
|
|
|
|
RE: 3w_9xxx drive/lenny kernel
by Nicholas Materer
::
Rate this Message:
Markus, I am using the standard debian kernel. I just to see that it was installed correctly.
Peter, you reminded me that some time ago I had to upgrade the firmware to get the system to work. My card is a model 9500S-4LP with a firmware (from show ver with the tw_ctl tool) CLI Version = 2.00.07.003 API Version = 2.04.00.003 CLI Compatible Range = [2.00.00.001 to 2.00.07.003] It looks like there is a new version of the firmware. I try an upgrade tonight. Thanks Nick -----Original Message----- From: Peter Yorke [mailto:PeterY@...] Sent: Wednesday, July 02, 2008 8:38 AM To: materer@...; debian-amd64@... Subject: Re: 3w_9xxx drive/lenny kernel I have been running 3ware 9550's on lenny for over six months without issue with the 2.6.22 and .2.6.24 kernels. What model card are you running? What version of firmware on the card? Peter Typed on my Black Berry Device ----- Original Message ----- From: nicholas materer <materer@...> To: debian-amd64@... <debian-amd64@...> Sent: Mon Jun 30 20:51:57 2008 Subject: 3w_9xxx drive/lenny kernel I just updated a system from etch to lenny. With either the linux-image-2.6.24-1-amd64 or the linux-image-2.6.22-3-amd64 kernel, my 3w_9xxxx raid controller did not function. On the console, lines and lines of PCI parity error are reported. The 2.6.18-6-amd64 from etch works fine, even after the system is updated. Unfortunately, the system boots off the raid (not the best idea) so I need to make more effect to capture the exact errors. Did not learn much from Googling. Has anyone had similar experiences with the 3w_9xxx card? Sort lspci output: 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) 08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 0a:04.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID 80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) Nick Materer -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... |
|
|
RE: 3w_9xxx drive/lenny kernel
by Peter Yorke
::
Rate this Message:
Here is the relevant article from 3Ware
http://www.3ware.com/kb/article.aspx?id=15012 Peter -----Original Message----- From: Peter Yorke [mailto:PeterY@...] Sent: Wednesday, July 02, 2008 6:38 AM To: materer@...; debian-amd64@... Subject: Re: 3w_9xxx drive/lenny kernel I have been running 3ware 9550's on lenny for over six months without issue with the 2.6.22 and .2.6.24 kernels. What model card are you running? What version of firmware on the card? Peter Typed on my Black Berry Device ----- Original Message ----- From: nicholas materer <materer@...> To: debian-amd64@... <debian-amd64@...> Sent: Mon Jun 30 20:51:57 2008 Subject: 3w_9xxx drive/lenny kernel I just updated a system from etch to lenny. With either the linux-image-2.6.24-1-amd64 or the linux-image-2.6.22-3-amd64 kernel, my 3w_9xxxx raid controller did not function. On the console, lines and lines of PCI parity error are reported. The 2.6.18-6-amd64 from etch works fine, even after the system is updated. Unfortunately, the system boots off the raid (not the best idea) so I need to make more effect to capture the exact errors. Did not learn much from Googling. Has anyone had similar experiences with the 3w_9xxx card? Sort lspci output: 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) 08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 0a:04.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID 80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) Nick Materer -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... |
|
|
RE: 3w_9xxx drive/lenny kernel
by Peter Yorke
::
Rate this Message:
My current firmware is 3.08.02.005 and kernel is 2.6.24-7
-----Original Message----- From: nicholas materer [mailto:materer@...] Sent: Wednesday, July 02, 2008 8:10 AM To: Peter Yorke; debian-amd64@... Subject: RE: 3w_9xxx drive/lenny kernel Markus, I am using the standard debian kernel. I just to see that it was installed correctly. Peter, you reminded me that some time ago I had to upgrade the firmware to get the system to work. My card is a model 9500S-4LP with a firmware (from show ver with the tw_ctl tool) CLI Version = 2.00.07.003 API Version = 2.04.00.003 CLI Compatible Range = [2.00.00.001 to 2.00.07.003] It looks like there is a new version of the firmware. I try an upgrade tonight. Thanks Nick -----Original Message----- From: Peter Yorke [mailto:PeterY@...] Sent: Wednesday, July 02, 2008 8:38 AM To: materer@...; debian-amd64@... Subject: Re: 3w_9xxx drive/lenny kernel I have been running 3ware 9550's on lenny for over six months without issue with the 2.6.22 and .2.6.24 kernels. What model card are you running? What version of firmware on the card? Peter Typed on my Black Berry Device ----- Original Message ----- From: nicholas materer <materer@...> To: debian-amd64@... <debian-amd64@...> Sent: Mon Jun 30 20:51:57 2008 Subject: 3w_9xxx drive/lenny kernel I just updated a system from etch to lenny. With either the linux-image-2.6.24-1-amd64 or the linux-image-2.6.22-3-amd64 kernel, my 3w_9xxxx raid controller did not function. On the console, lines and lines of PCI parity error are reported. The 2.6.18-6-amd64 from etch works fine, even after the system is updated. Unfortunately, the system boots off the raid (not the best idea) so I need to make more effect to capture the exact errors. Did not learn much from Googling. Has anyone had similar experiences with the 3w_9xxx card? Sort lspci output: 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) 08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 0a:04.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID 80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) Nick Materer -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... |
|
|
RE: 3w_9xxx drive/lenny kernel/AMD64 Problem
by Nicholas Materer
::
Rate this Message:
It looks like my problem is AMD64 specific. The
debian-LennyBeta2-i386-netinst.iso install image recognizes the card correctly. However, the debian-LennyBeta2-amd64-netinst.iso install image has the same problems that I have with booting my system after upgrading the kernel to the 2.6.24 or 2.6.20 version. In addition, I do not think that this problem is due to the 3w_9xxx driver. I updated to the firmware on my card to the latest version with no success. I complied latest the driver from the 3ware web site - some problem. I also complied the driver from the 2.6.18 kernel source (had to make two trivial patches due to a change in the scatterlist structure). They all failed with the same errors - PCI Parity Error, PCI Abort and Controller Queue Error. These error are printed from the routine twa_decode_bits in the driver - "This function will print readable messages from status register errors". I guess I have an AMD64 specific regression affecting the PCI-X buss on my Thunder K8WE board. I guess that I need to boot off a non-raid boot disk and collect the system log with both a i386 and an AMD64 system. Nick -----Original Message----- From: Peter Yorke [mailto:PeterY@...] Sent: Wednesday, July 02, 2008 2:09 PM To: nicholas materer; debian-amd64@... Subject: RE: 3w_9xxx drive/lenny kernel My current firmware is 3.08.02.005 and kernel is 2.6.24-7 -----Original Message----- From: nicholas materer [mailto:materer@...] Sent: Wednesday, July 02, 2008 8:10 AM To: Peter Yorke; debian-amd64@... Subject: RE: 3w_9xxx drive/lenny kernel Markus, I am using the standard debian kernel. I just to see that it was installed correctly. Peter, you reminded me that some time ago I had to upgrade the firmware to get the system to work. My card is a model 9500S-4LP with a firmware (from show ver with the tw_ctl tool) CLI Version = 2.00.07.003 API Version = 2.04.00.003 CLI Compatible Range = [2.00.00.001 to 2.00.07.003] It looks like there is a new version of the firmware. I try an upgrade tonight. Thanks Nick -----Original Message----- From: Peter Yorke [mailto:PeterY@...] Sent: Wednesday, July 02, 2008 8:38 AM To: materer@...; debian-amd64@... Subject: Re: 3w_9xxx drive/lenny kernel I have been running 3ware 9550's on lenny for over six months without issue with the 2.6.22 and .2.6.24 kernels. What model card are you running? What version of firmware on the card? Peter Typed on my Black Berry Device ----- Original Message ----- From: nicholas materer <materer@...> To: debian-amd64@... <debian-amd64@...> Sent: Mon Jun 30 20:51:57 2008 Subject: 3w_9xxx drive/lenny kernel I just updated a system from etch to lenny. With either the linux-image-2.6.24-1-amd64 or the linux-image-2.6.22-3-amd64 kernel, my 3w_9xxxx raid controller did not function. On the console, lines and lines of PCI parity error are reported. The 2.6.18-6-amd64 from etch works fine, even after the system is updated. Unfortunately, the system boots off the raid (not the best idea) so I need to make more effect to capture the exact errors. Did not learn much from Googling. Has anyone had similar experiences with the 3w_9xxx card? Sort lspci output: 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) 08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 0a:04.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID 80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) Nick Materer -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... -- To UNSUBSCRIBE, email to debian-amd64-REQUEST@... with a subject of "unsubscribe". Trouble? Contact listmaster@... |
|
|
|
| Free Forum Powered by Nabble | Forum Help |