[pydev - Users] Ganymede + Subclipse + PyDev problems

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5097778
By: ijstokes

I am unable to move or rename files in an SVN project once I install PyDev.
Prior to installation it works fine.  Has anyone else seen this behavior?

I have a fresh install of Eclipse Ganymede, with a handful of the plugins enabled
(GMF, EMF, UML, XML/XSL/XSD, that sort of thing).  I have also installed Subclipse
rather than Subversive, since the later was giving me problems.  Nothing else
has been added to the system (I did a fresh install 60 minutes ago in an attempt
to isolate this problem).

Suggestions on how to resolve this greatly appreciated.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=293649

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Pydev-users mailing list
Pydev-users@...
https://lists.sourceforge.net/lists/listinfo/pydev-users

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5097786
By: fabioz

That's a known problem with Eclipse 3.4.
See https://sourceforge.net/tracker/index.php?func=detail&aid=2006925&group_id=8
5796&atid=577329 for a workaround until a pydev version that supports it is
released.

Cheers,

Fabio

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=293649

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Pydev-users mailing list
Pydev-users@...
https://lists.sourceforge.net/lists/listinfo/pydev-users

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5097868
By: ijstokes

I don't see any workarounds there, unless you are suggesting that I need to
revert to 3.3, which isn't exactly a "workaround".

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=293649

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Pydev-users mailing list
Pydev-users@...
https://lists.sourceforge.net/lists/listinfo/pydev-users

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5097903
By: fabioz

You're right... I read it wrong... (there's currently no workaround).

I plan to fix that for the next release (until then, you can probably use the
resource navigator instead of the pydev package explorer -- or revert back to
3.3).

Cheers,

Fabio

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=293649

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Pydev-users mailing list
Pydev-users@...
https://lists.sourceforge.net/lists/listinfo/pydev-users

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5335220
By: shaba1

How does one start the "navigator" I am using eclipse v 3.4 Ganymede( I think.
I get confused with all the version names) and I went thru that tutorial at
fabio's web site. At the part where it says to start the "navigator" I could
not find anyway to start the navigator within eclipse/pydev.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=293649

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Pydev-users mailing list
Pydev-users@...
https://lists.sourceforge.net/lists/listinfo/pydev-users

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5342882
By: fabioz

window > show view > pydev > pydev package explorer (if you're refering to the
pydev package explorer)

if you want the navigator (which is not customized to view pydev elements, you
can go to: window > show view > general > navigator)

Cheers,

Fabio

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=293649

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Pydev-users mailing list
Pydev-users@...
https://lists.sourceforge.net/lists/listinfo/pydev-users

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5342892
By: fabioz

Just a note. The original bug pointed was fixed in 1.3.19 (so, the pydev package
explorer should be already working with eclipse 3.4)

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=293649

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Pydev-users mailing list
Pydev-users@...
https://lists.sourceforge.net/lists/listinfo/pydev-users

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5354435
By: shaba1

Fabio:

I am talking about a line from the "manual" At

http://www.fabioz.com/pydev/manual_101_project_conf2.html

It said:

"You may see which Python information your project has by going to the navigator
(it must be the navigator and not the package explorer), rigth-clicking the
project you want info on and selecting 'properties'"

In my version of eclipse I could not find anything called the "navigator"

Also that manual/tutorial needs to be updated. It still list python version
2.4 as the most recent version. And the screen shots apply to an older version
of eclipse( I think).

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=293649

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Pydev-users mailing list
Pydev-users@...
https://lists.sourceforge.net/lists/listinfo/pydev-users